基于统一硬化参量的海洋K0固结土动力本构模型

为方便海洋工程中桩土相互作用计算,根据海洋K₀固结土体特性,对现有相关土体本构模型进行简化。在修正剑桥模型的基础上,基于热力学理论,选用耗散功作为硬化参量,结合原状土体的固结属性,推导了适用于黏土与砂土的统一硬化模型。在此基础上,通过采用旋转硬化与等向硬化相结合的硬化理论来表征K₀固结土在循环荷载作用下的硬化规律,同时引入屈服面收缩参数Θ来描述循环荷载加载过程中土体屈服面的演化特性,进而建立了循环荷载下海洋K₀固结土体统一硬化模型。为验证本文提出的本构模型的合理性,开展了2个案例的对比研究,研究结果表明:新提出的统一硬化模型的计算值与实测值吻合,选用的计算参数少且物理意义明确。     

Exploring the security landscape: NoC-based MPSoC to Cloud-of-Chips

In this paper, we present a detailed and systematic overview of communication security aspects of Multi-Processor Systems-on-Chip (MPSoC) and the emerging potential threats on the novel Cloud-of-Chips (CoC) paradigm. The CoC concept refers to highly scalable and composable systems, assembled not only at system design-time using RTL, like traditional SoC, but also at integrated circuit (IC) packaging time thanks to 3D-IC integration technology. Practical implementation of CoC systems needs to solve the problem of scalable, configurable and secure communication not only between different functional blocks in a single ICs, but also between different ICs in a single package, and between different packages on the same or different PCBs and even between different systems. To boost such extremely flexible communication infrastructure CoC system relies on Software-Defined Network-on-Chip (SDNoC) paradigm that combines design-time configurability of on-chip systems (NoC) and highly configurable communication of macroscopic systems (SDN). This study first explores security threats and existing solutions for traditional MPSoC platforms. Afterwards, we propose SDNoC as an alternative to MPSoC communication security, and we further extend our discussion to CoC systems to identify additional security concerns. Moreover, we present a comparison of SDNoC based approach over existing approaches and discuss its potential advantages.     

On the sizing of a solar thermal electricity plant for multiple objectives using evolutionary optimization

Design, implementation and operation of solar thermal electricity plants are no more an academic task, rather they have become a necessity. In this paper, we work with power industries to formulate a multi-objective optimization model and attempt to solve the resulting problem using classical as well as evolutionary optimization techniques. On a set of four objectives having complex trade-offs, our proposed procedure first finds a set of trade-off solutions showing the entire range of optimal solutions. Thereafter, the evolutionary optimization procedure is combined with a multiple criterion decision making (MCDM) approach to focus on preferred regions of the trade-off frontier. Obtained solutions are compared with a classical generating method. Eventually, a decision-maker is involved in the process and a single preferred solution is obtained in a systematic manner. Starting with generating a wide spectrum of trade-off solutions to have a global understanding of feasible solutions, then concentrating on specific preferred regions for having a more detailed understanding of preferred solutions, and then zeroing on a single preferred solution with the help of a decision-maker demonstrates the use of multi-objective optimization and decision making methodologies in practice. As a by-product, useful properties among decision variables that are common to the obtained solutions are gathered as vital knowledge for the problem. The procedures used in this paper are ready to be used to other similar real-world problem solving tasks.     

Decay rate of critical fluctuations in steam and in dilute steam-NaCl mixtures

The decay rate of critical fluctuations in steam and in a steam-NaCl mixture has been investigated experimentally with the aid of photon correlation spectroscopy. For pure steam, the measurements have been performed along seven isochores [(¦– _c¦)/_c<0.09] as a function of the temperatureT for (T–T_t)<1 K. The results have been compared with the values predicted by the renormalization-group theory written as a modification of the classical mode coupling theory. The agreement between experiment and theory is satisfactory along the critical isochore, but larger deviations are noted for _c when approching the transition temperatureT _t. The decay rate of a 0.1% (molar) dilute mixture of NaCl in H₂O has been measured along some near-critical isochores as a function of temperature. Its behavior, which is very different from that observed for pure steam, is dicussed.Paper presented at the Tenth Symposium on Thermophysical Properties, June 20–23, 1988, Gaithersburg, Maryland, U.S.A.     

Thermal conductivity of a dendritic ice layer

Measurements of the thermal conductivities of the frozen layer of aqueous binary solutions have been performed using the transient hot-wire method. Solutions of ethylene glycol and sodium chloride were utilized as the testing fluids, and they were frozen up in the test section in which the platinum wires 40 m in diameter and 170 mm in length were strung. Measurements were carried out under equilibrium at a variety of both the initial concentration of the solution and the temperature of the frozen layer. The expressions of the thermal conductivity of the frozen layer were determined. It was found that the thermal conductivity of the dendritic ice layer was favorably assessed with the Lichteneker's model by introducing the solid fraction under an assumption of the equililbrium within the range of parameters examined.Paper presented at the Tenth Symposium on Thermophysical Properties, June 20–23, 1988, Gaithersburg, Maryland, U.S.A.     

Transport properties of critical dilute solutions

On the basis of the isomorphism of critical phenomena, the behavior of transport properties of binary mixtures in the vicinity of the vapor-liquid critical line is considered. In particular, the renormalization of the singularity of the thermal conductivity in dilute critical solutions has been analyzed in detail. It is shown that the behavior of the thermal conductivity is determined by the critical background, i.e., the fluctuation-induced regular part, which diverges at the critical point of a solvent.     

人工神经网络在组织网络化发展评价中的应用*

通过对给定样本模式的学习,构建的三层神经网络模型能够获取评价专家的经验、知识、主观判断以及对目标重要性的权重协调能力,较好地保证评价结果的客观性.实例证明,人工神经网络方法应用于组织网络化发展评价是可行和有效的.     

一种新的位错运动理论及对材料动态力学行为的描述

通过对位错在晶格内运动的动力学过程的全面分析。本文提出了一种考虑到粘性阻尼效应和热激活的位错集体运动统一理论。其特点是可用一简单的方程对从低速到高速运动的大量位错的平均行为进行统一描述。对ＫＣｌ晶体的典型实验怕拟合发现理论描述与实验结果相当一致。     

Wet corrosion of nitride PVD films in supercritical solutions

Nitride TiN, TiAlN and CrN films exhibit a high performance with respect to steel corrosion protection in supercritical water. However, for practical applications their corrosion resistance in water solutions is more important. Wet corrosion of nitride PVD films in neutral, acid and alkaline supercritical solutions was studied. The highest stability of the films was revealed in neutral sodium chloride and alkaline CH₃NH₂ solutions. In the latter case regular cubic spinel crystals were formed on the surface of TiAlN films. Acidic solutions destroy nitride films due to growth of corrosion products beneath the coating layer.     

Microstructure and Mechanical Properties of Hot-Pressed Silicon Carbide-Aluminum Nitride Compositions

A flexural strength of up to 1 GPa was achieved in SiC-AIN materials and is attributed to a dense, equiaxial grain structure of the 2H(δ) SiC-AIN solid solution, with a relatively uniform grain size of ∼ 1 μm. The strength was found to decrease with increasing grain size. While the β→α phase transformation and the formation of various metastable polytypes make microstructural control difficult in SiC materials, excellent control is facilitated in SiC-AIN materials as a result of the stable 2H solid solution. Several mechanisms of grain refinement during the β→ 2H transition were observed, most notably the direct formation of several 2H grains from a single β grain. In addition, grain growth is limited by the diffusion-controlled nature of the transition. These mechanisms could be utilized to achieve even higher strength values, with potentially higher reliability of the materials in structural applications.