焦化厂门型吊改造

从门型吊承轨梁的受力分析入手．研究剖析了原结构产生裂纹的诸多原因．通过理论计算。做出了承轨梁与桁架连接接点的最佳设计．提出了符合现场实际情况的更换承轨梁的最佳方案，为类似设备改造提供了可借鉴的经验。     

卫星编队飞行中的队形设计研究

目前关于卫星编队飞行的研究有显著的增加。多颗从属卫星(从星)在近距离内与主卫星(主星)组成特定的队形以完成相应的任务,是卫星编队飞行的特点及潜在优势。卫星在编队飞行时,其队形定义为以各颗卫星质心为顶点所构成的几何形状,而队形设计则是根据队形的几何形状求出各卫星的轨道根数(其中主星的轨道根数可以根据任务的要求事先确定)。基于相对轨道根数法,根据卫星相对运动方程,提出了“自然队形”的概念及队形设计的一般方法,并给出了具体的例子。     

冷41-平14"L"型水平井轨迹优化与控制技术

冷41-平14井受地面条件的限制,靶前位移小,为保证中间套管和完井管柱的顺利下入,剖面设计为“反向造斜-稳斜-降斜-正向造斜-水平段”的“L”型。简要介绍了冷41-平14“L”型水平井的设计概况,详细介绍了该井井眼轨道优化设计原则和设计结果,以及实钻井眼轨迹连续控制技术。该井精确命中A、B靶,两靶处的井斜角、方位角和垂深等达到了设计要求,在A靶实现了软着陆。该井井眼轨道优化设计和井眼轨迹控制技术为类似水平井的井眼轨道设计和轨迹控制提供了有益的借鉴。     

The Content Driven Mobile Internet

The development of future mobile networks will be driven, in large part, by content and web based services. In this paper, we examine several performance, scalability and architectural challenges faced by future mobile web applications and how advanced mobile content delivery techniques can address these challenges. We review existing content delivery using a taxonomy that consists of three categories: network scaling, end system acceleration, and content and protocol optimization. While wireline content delivery focuses on network and server scalability, mobile content delivery will likely benefit most from optimizing radio link usage. We also present our ongoing work in this area, which extends the functionality of edge caching to the terminal, uses user interest correlation information to maintain low terminal power consumption and adds a new dimension to radio resource management. This revised version was published online in August 2006 with corrections to the Cover Date.     

水平井眼轨迹对气井出砂趋势及工作制度的影响

出砂是影响油气井正常生产的重要因素之一。借助FEPG有限元程序自动生成平台，建立了三维应力场弹塑性地层出砂模型，并运用有限元法计算分析了不同轨迹的裸眼井井壁周围的有效塑性应变分布规律及出砂趋势，研究了气藏压力衰竭对完井方式的影响。研究表明，水平井眼轨迹对出砂有重要的影响，同一地应力环境下向不同方位延伸的水平井在投产时应该采取不同的生产压差和不同的生产制度，水平井眼轨迹对出砂的影响程度随着3个地应力差异的增大而加剧。气藏压力衰竭对井壁的稳定性和出砂趋势都有重要影响。随着气藏压力的衰竭，井壁稳定性将变得越来越差，最终导致井筒出砂。因此，对气井完井不仅应该考虑到气藏开发初期地层的稳定性状况，而且还应该考虑到气藏压力衰竭后可能出现的井壁失稳问题。     

一种适合协同工作系统的安全认证方案

针对网络化协同工作系统的安全认证需求，综合应用Kerberos协议、X．509证书和口令认证技术，借鉴PKI的思想，设计了一种适合网络化协同工作系统的灵活而易于扩展的安全认证方案。这个方案能够保证证书的安全分发，满足网络化协同工作系统对分散、动态的用户安全身份认证的要求。     

Forming the optimal union of multiple databases

Many organizations, best illustrated by libraries, have access to hundreds of databases possessing varying degrees of complimentary and overlapping records. While users may receive positive marginal benefits from data duplications, all databases and their services cannot be supported because of resource limitations. This paper attempts to conceptualize the problem of database collection in an environment of multiple databases, with differential content and performance characteristics, diverse users, and limited resources. It defines the database collection problem as a constrained zero-one integer programming problem and solves for the optimal combination or union of databases. Several extensions are shown, where special conditions are imposed on the relationships between databases and/or their availability.     

基于PRO/E三维管道轨迹专用检具的设计

介绍使用该软件组件设计模块中的高级工具———切除 (CutOut)功能设计高精度三维轨迹管道零件检具的方法 ,该方法具有高效和精密等特点。     

Temperature–stress–strain trajectory modelling during thermo-mechanical fatigue

The isothermal strain‐life approach is the most commonly used approach for determining fatigue damage, particularly when yielding occurs. Computationally it is extremely fast and generally requires elastic finite element analyses only. Therefore, it has been adapted for variable temperatures. Local temperature—stress–strain behaviour is modelled with an operator of the Prandtl type. The hysteresis loops are supposed to be stabilized and no creep is considered. The consequences of reversal point filtering are analysed. The approach is finally compared to several thermo‐mechanical fatigue tests and the Skelton model.     

Measurement of forming trajectories during drilling

Results are provided for an experimental study of forming trajectories during drilling and the effect on them of cutting speed and drilling depth. __________ Translated from Izmeritel’naya Tekhnika, No. 8, pp. 31–33, August, 2006.