人工智能方法用于熔喷过程在线检测的研究

熔喷生产最终产品质量的控制，对于过程优化具有重要的意义。产品质量的在线检测是过程监测与质量控制必不可少的。本文首次在熔喷系统中引入人工智能的研究方法，对熔喷非织造布的厚度与纤维直径进行在线预测。实测数据与人工神经网络的预测结果吻合较好，从而证实了人工神经网络用于模拟熔喷过程的可行性。网络的输入包括：挤出机温度、喷头温度、熔融体挤出速率、空气流率及接收距离。神经元计算的输出是纤维直径与熔喷非织布的厚度。文中进一步提出了将神经网络与专家系统相结合的研究路线，以实现熔喷过程的优化控制。     

Early detection of ageing in solder joints through laser probe thermal analysis of the peltier effect

We have recently developed an optical contactless method for testing the quality of solder joints during accelerated thermal cycling ageing processes.¹ The method was based upon the measurement of the dynamic thermal behaviour of the joint to short bursts of Joule heating. It has proved to be efficient in revealing the formation of cracks at the lead-solder interface. We present a method to evaluate ageing at a much earlier stage in the cycling process. We have observed in earlier work,¹ that before cracks appear, structural changes occur in the solder at the lead-solder interface. The thermal response of the solder joint is recorded over time to a Peltier heat perturbation produced by flowing a current pulse through the interface where structural changes occur. The key point in this method is to discriminate the Peltier effect from the Joule thermal response because both effects generate heat. The variation of the early Peltier response in the thermal cycling ageing tests is seen as a quantitative signature of the structural changes in the lead-solder interface.     

Novel miniature integrated optical goniometers

A new principle and arrangement for directly determining the angle of incidence of an optical beam on an object are proposed and demonstrated. The novelty of the approach lies in the realization of a ‘smart object’, which extracts a portion of the incident beam's power into an optical waveguide attached to the object's surface or embedded in its body for converting the angle of incidence into the position of a guided beam with finite lateral extent. This ‘integrated optical light pointer’ beam is accomplished by means of creating additional degrees of freedom on the target in two different ways. While a first type is based on introducing spatial variations of the waveguide thickness, a second type makes use of a chirp of the grating periodicity. The feasibility for practical applications has been experimentally demonstrated by a direct comparison with a commercial high-resolution encoder, resulting in an r.m.s. error of <30′'. Measurements have been performed for chips fabricated based on replicated polycarbonate substrates and with no external optics, showing the great potential of this approach for realizing low-cost yet high-performance miniature goniometers.     

脉冲啁啾对干涉相关测宽的影响及其消除方法

本文深入讨论了脉冲啁啾的非线性起源及其对干涉相关测宽(等值宽度和条纹计数)法的影响。提出根据干涉相关曲线下包络最大值位置适当降低等值宽度位置和用计算机平均处理干涉相关信息的技术以消除啁啾的影响。     

节流式差压流量计的发展和现状

文章介绍节流式差压流量计的特点及标准化进程，煤气流量测量中存在的难点以及正在试图解决的途径。     

自控温电伴热材料在仪表测量管线上的应用

文章就化工自动化仪表测量管线的伴热问题,介绍了自控温电伴热材料的特点、伴热设计、施工方案以及运行中的注意事项。     

Ultrasonic measurement of the inter-electrode gap in electrochemical machining

During the process of electrochemical machining the dependency of the inter-electrode gap with time and process parameters can be used to determine process characteristics and to define the shape of the workpiece surface relative to the tool surface. Defining process variables to map out the required gap-time function requires the use of time-consuming iterative trials. In-line monitoring of the gap would enable process control and tool to workpiece transfer characteristics to be achieved (for ideal conditions) without the requirement to generate such parameter maps. This work explores the use of ultrasound applied as a passive, non-intrusive, in-line gap measurement system for ECM. The accuracy of this technique was confirmed through correspondence between the generated gap-time and current time data and theoretical models applicable to ideal conditions. Gap measurements are also used to demonstrate and quantify the degree of departure from ideal behaviour for an In718/chloride system as the electrolyte flow rate is reduced from 16 to 4 l min⁻¹. The monitoring of the gap size has also been shown to be effective when determining shape convergence under ideal conditions, for the example case of a 2D sinusoidal profile.     

高温高压下多种气体在储层岩心中吸附等温线的测定

利用自行研制的XF1型高温高压气体吸脱附测试仪,结合一台色谱分析仪(HP6890),一套抽真空系统,分别测定了N₂、CH₄、C₂H₆、C₃H₈、nC₄及其混合气体在三个岩心中的吸脱附等温线共计42条(单组分30条,累计测试点516个;混合气12条,累计测试点203个),以及吸附平衡后混合气的自由气相组成、吸附相组成和各组分的吸附等温线各48条(累计测试点431个).测试的温度为50.5℃.实验结果表明:①储层岩心介质对烃类气体的吸附现象是客观存在的,不容忽视;②仅就测试所得的数据来看,如果忽略其它因素,可以初步估计,不考虑吸附的砂岩储层气藏的计算储量将比考虑吸附少5%以上;③岩心-气体吸附体系的吸附能力除受压力影响外,更受到储层介质、岩石成分、结构和物性性质的影响,除此之外,还受到多组分气体中重烃组分数目、摩尔含量等的影响;④多组分气体组分相对吸附量能有效地表征多组分气体中各组分气体的竞争吸附能力大小,依据这个指标可将五元多组分气体体系中各组分气体按其竞争吸附能力由强到弱排序为nC₄>C₃H₈>C₂H₆>CH₄>N₂.     

二维加速度激光传感器的设计

以角锥棱镜作为惯性元件,利用光学干涉原理,可以实现对运动物体的二维加速度测量。本文给出了二维加速度激光传感器的设计理论和测量原理。