低碳钢热变形过程中铁素体的织构形成规律

利用背散射电子衍射取向成像技术定量分析了热模拟单向压缩条件下Q235碳素钢热变形时铁素体的织构形成规律。结果表明,在710℃纯铁素体热压缩过程中,形成〈100〉和〈111〉方向的线织构。〈111〉方向织构增强的速度较快,到应变为1.0时达最大值,然后随应变的加大而减弱;〈100〉方向织构在形变量较小时增强的速度较慢,在大应变时增强的速度很快。大应变时虽导致一定程度的动态再结晶,使铁素体晶粒细化,但组织不均匀,织构过强,造成强烈的各向异性。在奥氏体与铁素体两相区变形时,先共析铁素体因形变同样产生强烈的织构。随着形变温度的提高和先共析铁素体的减少,织构减弱。     

Use of ultrafiltration for preparing improved tomato pulp

The characteristics of high-quality tomato pulp (commercial def.: crushed or diced tomatoes with about 30% tomato juice as packing medium) canned with tomato juice pulp enriched by ultrafiltration as packing medium were compared with those covered with conventional vacuum-concentrated juice.
Both hot- and cold-break products were prepared and those containing 20% serum-reduced packing juice proved to be the best, showing no signs of syneresis on storage and with improvements in sensory properties, colour and non-enzymatic browning; some volatile components were reduced.     

Physical, Chemical and Sensory Changes in Irradiated Fresh Pork Packaged in Modified Atmosphere

The effects of irradiation dose (0, 0.5 and 1.0 kGy), headspace oxygen (0, 10 and 20% O₂, balance nitrogen) and storage temperature (5, 15 and 25°C) on the physical, chemical and sensory changes in fresh pork were studied using factorial design experiments. Irradiation in the absence of oxygen extended the sensory shelf life of pork from 9 to 26 days at 5°C and from & lt; 2 to 2 days at 25°C. Oxygen in the package headspace combined with irradiation adversely affected physical, chemical and sensory characteristics of the end product.     

A new methodology to appraise the physical characteristics of maize silage by image processing: effect of the ensiling process

We present a new computer vision method for measuring the physical characteristics of maize silages based on the extraction of image textural features, namely five Haralick features, the moments of order 1 and 2 on the grey levels of the image, and a fractal parameter. To show the effectiveness of these features for characterising the physical properties of the maize silage, a trial was performed on three maize cultivars (Zea mays L, a mid–early hybrid and an early hybrid) to study the effects of the ensiling process. The features could discern effects of the ensiling process on the physical properties of the maize silage. These effects were neither significant by comparing particle size distributions, nor with chemical compositions, whereas a biological response (degradation in the rumen) to the ensiling process exists. Thus image textural features seemed to give new and interesting measurements of the physical properties of the silage, explaining the biological response better than other methods. Furthermore, the ensiling effect was not the same with all the maize types and varied with the proportion of large particles in the silages. Linear relations between features before and after the ensiling process made it possible to predict a measure on a silage knowing its value on the parent forage. Copyright © 2004 Society of Chemical Industry     

Wood inspection with non-supervised clustering

Abstract. The appearance of sawn timber has huge natural variations that the human inspector easily compensates for mentally when determining the types of defects and the grade of each board. However, for automatic wood inspection systems these variations are a major source for complication. This makes it difficult to use textbook methodologies for visual inspection. These methodologies generally aim at systems that are trained in a supervised manner with samples of defects and good material, but selecting and labeling the samples is an error-prone process that limits the accuracy that can be achieved. We present a non-supervised clustering-based approach for detecting and recognizing defects in lumber boards. A key idea is to employ a self-organizing map (SOM) for discriminating between sound wood and defects. Human involvement needed for training is minimal. The approach has been tested with color images of lumber boards, and the achieved false detection and error escape rates are low. The approach also provides a self-intuitive visual user interface. Received: 16 December 2000 / Accepted: 8 December 2001 Correspondence to: O. Silvén     

Investigation of the Correlation between Texture and Microstructure on a Submicrometer Scale in the TEM

In recent years the investigation of local texture and microstructure by analysis of electron backscatter diffraction patterns (EBSP) in the SEM has become a very powerful and popular method. With the introduction of SEM with field emission guns (FEG) the spatial resolution of EBSP measurements could be enhanced from 500 nm with a tungsten emitter to better than 50 nm. This evolution of SEM techniques raises the question whether transmission electron microscopy (TEM) still has fields of application in texture research. The present article answers this question with a clear “yes” and presents three examples of investigations where TEM is indispensable. The three examples comprise the investigation of the correlation between dislocation structure and deformation texture, a study on nucleation mechanisms of recrystallization in highly deformed metals and the investigation of microtexture and microstructure in nanocrystalline materials. Together with the presentation of these cases some of the necessary measurement techniques are described briefly. It is shown that TEM has to be applied when highest spatial resolution of orientation determination and imaging and high accuracy of orientation determination are to be reached, when the three‐dimensional and quantitative characterization of lattice defects is required or when materials with a high density of lattice defects are to be investigated.     

Congruences and ideals in pseudoeffect algebras

This paper is devoted to congruences and ideals in pseudoeffect algebras. Let I be a normal ideal in a pseudoeffect algebra E. We show that: (1) the relation ~ _I induced by I is a congruence if and only if for every a∈E, I∩ [0,a] is upper directed; (2) the relation ~ _I induced by I is a strong congruence if and only if I is a normal weak Riesz ideal in a pseudoeffect algebra E. Moreover, we introduce a stronger concept of congruence—namely Riesz strong congruence—and we prove that, if I is a normal weak Riesz ideal in a pseudoeffect algebra E, then ~ _I is a Riesz strong congruence and, conversely, if ~ is a Riesz strong congruence, then I = [0]_~ is a normal weak Riesz ideal, and ~ _I = ~. This work was supported by the National Natural Science Foundation of China (Grant No. 10271069).     

A Survey on the Numerics and Computations for the Landau-Lifshitz Equation of Micromagnetism

The Landau-Lifshitz (LL)equation of micromagnetism governs rich variety of the evolution of magnetization patterns in ferromagnetic media. This is due to the complexity of physical quantities appearing in the LL equation. This complexity causes also an interesting mathematical properties of the LL equation: nonlocal character for some quantities,nonconvex side-constraints, strongly nonlinear terms. These effects influence also the numerical approximations. In this work, recent developments on the approximation of weak solutions, together with the overview of well-known methods for strong solutions,are addressed. Author is supported by the Fund for Scientific Research - Flanders FWO (Belgium).     

Real-time homogenous translucent material editing

This paper presents a novel method for real-time homogenous translucent material editing under fixed illumination. We consider the complete analytic BSSRDF model proposed by Jensen et al. [ [JMLH01] ], including both multiple scattering and single scattering. Our method allows the user to adjust the analytic parameters of BSSRDF and provides high-quality, real-time rendering feedback. Inspired by recently developed Precomputed Radiance Transfer (PRT) techniques, we approximate both the multiple scattering diffuse reflectance function and the single scattering exponential attenuation function in the analytic model using basis functions, so that re-computing the outgoing radiance at each vertex as parameters change reduces to simple dot products. In addition, using a non-uniform piecewise polynomial basis, we are able to achieve smaller approximation error than using bases adopted in previous PRT-based works, such as spherical harmonics and wavelets. Using hardware acceleration, we demonstrate that our system generates images comparable to [ [JMLH01] ]at real-time frame-rates.