Bioprocess applications of model-based estimation techniques

The last decade has seen the development of a number of approaches for estimating those variables which are difficult to measure on-line in industrial process situations. Whilst a range of techniques is available, a common element is the use of process knowledge in the form of a system model. In the case of bioprocess systems, although a large range of models has been presented in the literature, their use in estimation schemes on an industrial scale has been limited. A number of reasons can be identified for their low level of utilisation. Of particular significance is the uncertainty which exists in quantifying system performance and the process-model mismatch which inevitably results. The level of ‘pre-defined model’ uncertainty, together with the knowledge gained during the course of the fermentation, serves to dictate estimator structure. The paper considers a range of estimation strategies and contrasts, through industrial applications, their performance characteristics and utility.     

无基坑轨道衡的研究

本文对无基坑轨道衡的开发与研制,进行了可行性研究。     

十三陵蓄能电站上水库自动监测系统的设计及运行

由于十三陵蓄能电站上水库地处蟒山之巅，所在山体地质条件复杂。施工期埋设了大量的监测仪器，原有人工监测系统效率低、资料分析的同步性差。2002年5月，对其进行了自动化改造，现已有一套符合其特点的自动化监测系统。十三陵上水库水工建筑自动监测系统已正常运行了三年，同时也存在着问题，有待于进一步的探讨和改进。     

Development of cable fault location method using fiber optic distributed temperature sensor

When ground-fault problems occur on a cable line, immediate fault location and restoration are required. Therefore, various new methods to locate the fault point instantaneously have been investigated to replace such conventional methods as the Murray loop method and the pulse radar method [1]. These methods require a long time to locate the fault point. One possible fault location method is to sense the temperature rise following a ground fault using a fiber optic distributed temperature sensor. Application of this method was found feasible through sensing the temperature rise at a ground-fault test using a thermocouple as a temperature sensor with test cables [4]. A power/optical composite cable was prepared experimentally and after verifying its thermal mechanical performance, the temperature rise at an incidence of a fault was determined and the anticipated performance was demonstrated in a ground-fault test. This article describes the outline of the test.     

一种用于强振环境的转速传感器

该文介绍一种简单、可靠、小巧的转速传感器。它的特点是在强振环境下仍具有很高的可靠,可用于坦克底盘、重型工程机械,燃气轮机组等机械作为转速监测。     

便携式无线通信中的陶瓷技术

重点讨论了现代无线通信中关键元器件之一滤波器的发展进程,中、高频及微波滤波器的主要类型及性能特点。低损耗、高介电常数陶瓷在RF和IF滤波器中的应用,能够实现无线设备的微型化。对制备滤波器的介质陶瓷材料的要求是:在所使用的波段内,相对介电常数r要大,可缩小介质元件的尺寸;品质因数Q要高,可获得良好的滤波特性及通讯质量;谐振频率的温度系数f接近于零或可调节,以达到整机电子回路的要求。     

Dynamic Survivability in WDM Mesh Networks Under Dynamic Traffic

Network survivability is a crucial requirement in WDM mesh networks. In this paper, we systematically consider the problem of dynamic survivability with dynamic single link failure in WDM networks under dynamic traffic demands. Specifically, we investigate various protection schemes, such as dedicated path protection (DPP), shared path protection (SPP), dedicated link protection (DLP), shared link protection (SLP), and two restoration schemes, path restoration (PR) and link restoration (LR). Moreover, two new shared protection methods are proposed, i.e., SRLG-based shared link protection (SRLG-SLP) and SRLG-based shared path protection (SRLG-SPP). The SRLG (shared risk link group) constraint defines the availability of protection resources to a working path, which requires that any two working paths sharing the same risk of failure (or in the same SRLG) cannot share the same protection resources. Furthermore, in our study, we consider a more practical dynamic single-link failure model, in which the link-failure-interarrival time and link-failure-holding time are considered as two independent parameters. Based on this link-failure model, extensive simulations are done to analyze and compare the dynamic survivable performance of various protection and restoration schemes. Resource utilization, protection efficiency, restoration efficiency, and service disruption ratio are employed as survivable performance metrics versus traffic load, link-failure frequency, and link-failure reparation time to evaluate the survivable performance. Many meaningful results are given. In addition, we show that the developed SRLG-SLP and SRLG-SPP protection schemes perform very well in terms of protection efficiency and service disruption ratio, while sacrificing some performance in terms of resource utilization.     

Sol-gel preparation of a di-ureasil electrolyte doped with lithium perchlorate

Solid polymer electrolytes (SPEs) synthesized by the sol-gel process and designated as di-ureasils have been prepared through the incorporation of lithium perchlorate, LiClO₄, into the d-U(2000) organic-inorganic hybrid network. Electrolytes with lithium salt compositions of n (where n indicates the number of oxyethylene units per Li⁺ ion) between ∞ and 0.5 were characterized by conductivity measurements, cyclic voltammetry at a gold microelectrode, thermal analysis and Fourier transform Raman (FT-Raman) spectroscopy. The conductivity results obtained suggest that this system offers a quite significant improvement over previously characterized analogues doped with lithium triflate [S.C. Nunes, V. de Zea Bermudez, D. Ostrovskii, M.M. Silva, S. Barros, M.J. Smith, R.A. Sá Ferreira, L.D. Carlos, J. Rocha, E. Morales, J. Electrochem. Soc. 152 (2) (2005), A429]. “Free” perchlorate ions, detected in all the samples examined, are identified as the main charge carriers in the sample that yields the highest room temperature conductivity (n = 20). In the di-ureasils with n ≤ 10 ionic association is favoured and the ionic conductivity drops.     

A Review of Wavelets for Digital Wireless Communication

Wavelets have been favorably applied in almost all aspects of digital wireless communication systems including data compression, source and channel coding, signal denoising, channel modeling and design of transceivers. The main property of wavelets in these applications is in their flexibility and ability to characterize signals accurately. In this paper recent trends and developments in the use of wavelets in wireless communications are reviewed. Major applications of wavelets in wireless channel modeling, interference mitigation, denoising, OFDM modulation, multiple access, Ultra Wideband communications, cognitive radio and wireless networks are surveyed. The confluence of information and communication technologies and the possibility of ubiquitous connectivity have posed a challenge to developing technologies and architectures capable of handling large volumes of data under severe resource constraints such as power and bandwidth. Wavelets are uniquely qualified to address this challenge. The flexibility and adaptation provided by wavelets have made wavelet technology a strong candidate for future wireless communication. Madan Kumar Lakshmanan was born in Chennai, India, in 1979. He received the B.E. (with distinction) in electrical engineering from the University of Madras, Chennai, India, in 2000. He joined the Indian Software firm, Polaris Software Labs Ltd., in 2000 where he wrote software for Telecommunication applications. At Polaris, he was awarded the “On The Spot Of Excellence Award” for his efforts. In 2003, he moved to the Indian Institute of Technology-Madras, to develop and establish a wireless communications network for rural connectivity. In 2004, he was awarded the Royal Dutch/Shell Chevning scholarship to pursue a Master degree in Telecommunications at the Delft University of Technology (TUDelft). At TUDelft he is affiliated to the International Research Center for Telecommunications-Transmission and Radar (IRCTR) where he is undertaking research in the field of wavelets applications in Wireless Communications. Homayoun Nikookar received his Ph.D. in Electrical Engineering from Delft University of Technology (TUDelft), The Netherlands, in 1995. From 1995 to 1998 he was a postdoc researcher at the International Research Center for Telecommunications-Transmission and Radar, TUDelft, where since 1999 he has been an Assistant Professor. Dr. Nikookar has done research on different areas of wireless communications, including wireless channel modeling, UWB, MIMO, multicarrier transmission, Wavelet-based OFDM and CDMA. He is a senior member of the IEEE.     

A Study of Shadowing on Indoor Visible-Light Wireless Communication Utilizing Plural White LED Lightings

White LED is considered as a strong candidate for the future lighting technology. We have proposed an optical wireless communication system that employs white LEDs for indoor wireless networks. In this system, LED is used not only as a lighting device, but also as a communication device. The transmitter has large optical power and large emission characteristics to function as lighting device. And the system has specific wireless channel impulse response differing from infrared wireless communication. In this paper, we discuss about shadowing effect on the system utilizing plural LED lightings including the performance of ISI based on the impulse response. We consider the downlink transmission based on TDMA and evaluate the shadowing effect caused by pedestrians with computer simulation. When the shadowing often occurs at 800 Mb/s, the performance of outage call duration rate and blocking rate are improved by using 3 LED lightings compared with 1 or 2 LED lightings. And, we show that the system with the optimal number of the LED lighting is robust against shadowing and can accommodate more calls. Toshihiko Komine was born in Shizuoka, Japan, on November 17, 1978. He received the B.E. and M.E. degrees in Information and Computer Science from Keio University, Yokohama, Japan, in 2001 and 2003 respectively. He is currently studying for the Ph.D. degree at Department of Information and Computer Science, Keio University. His current research interests are optical wireless communications and LED communications. Shinichiro Haruyama is a professor at Department of Information and Computer Science, Faculty of Science and Technology, Keio University, Yokohama, Japan. He received an M.S. in engineering science from University of California at Berkeley in 1983 and a Ph.D. in computer science from the University of Texas at Austin in 1990. He worked for Bell Laboratories of AT{&}T and Lucent Technologies, U.S.A from 1991 to 1996, and for Sony Computer Science Laboratories, Inc. from 1998 to 2002. His research interests include reconfigurable system, system design automation, wireless communication, and visible light communication. Masao Nakagawa was born in Tokyo, Japan in 1946. He received the B.E., M.E. and Ph.D. degrees in electrical engineering from Keio University, Yokohama, Japan, in 1969, 1971 and 1974 respectively. Since 1973, he has been with the Department of Electrical Engineering, Keio University, where he is now a Professor. His research interests are in CDMA, consumer Communications, Mobile communications, ITS (Intelligent Transport Systems), Wireless Home Networks, and Visible light Communication. He received 1989 IEEE Consumer Electronics Society Paper Award, 1999-Fall Best Paper Award in IEEE VTC, IEICE Achievement Award in 2000, IEICE Fellow Award in 2001. He was the executive committee chairman on International Symposium on Spread Spectrum Techniques and Applications in 1992 and the technical program committee chairman of ISITA (International Symposium on Spread Spectrum Techniques and Applications) in 1994. He is an editor of Wireless Personal Communications and was a guest editor of the special issues on “CDMA Networks I, II, III and IV” published in IEEE JSAC in 1994 (I and II) and 1996 (III and IV). He chairs the Wireless Home Link sub-committee in MMAC (Multimedia Mobile Access Communication Promotion Committee).