现金流量与公司投资决策--从公司规模角度的实证研究

根据现代公司金融理论，将融资因素引进公司的投资模型，研究不同规模的公司投资与现金流量的关系，并探寻不同规模公司投资决策行为差异的背后动机。实证研究发现：大规模公司投资对现金流量的敏感性要高于小规模公司，动因检验的结果表明大规模公司投资依赖于现金流量源于信息不对称理论，小规模公司源于自由现金流量的代理成本理论，这为我国完善资本市场、制定合理政策提供了借鉴的依据。     

土石坝无粘性粗粒料填筑标准和质量评价探讨

土石坝无粘性粗粒料填筑标准往往根据经验确定,而施工质量主要是通过碾压参数控制,理论依据不足。最大干密度和已建工程实践证明表面振动器法最大干密度与实际填筑干密度基本相等,可以直接指导设计和施工,据此提出了设计和施工控制标准;从砂砾石料、堆石料等无粘性粗粒料的特性探讨了填筑标准的适用范围,利用干密度与<5 mm粒径含量关系和填筑干密度,可以准确及时地对照填筑标准作出填筑质量评价结果。     

埕岛油田东部斜坡带东下段沉积特征及油藏类型研究

埕岛油田东部斜坡带下第三系油藏以三角洲、浊积扇砂体隐蔽油气藏为主，储层埋藏深、厚度变化大，油气成藏复杂。通过对该带的沉积特征、沉积体系和沉积物源的研究，指出其东下段砂体的分布主要受物源和沉积相带两方面控制，砂体只有在有效圈闭情况下才能成藏，并且从构造上总结了三种油藏类型。最后指出该带下一步勘探重点是沿主物源方向展布的、成藏条件良好的各种砂体。     

Assumptions and Consequences of Treating Providers in Therapy Studies as Fixed Versus Random Effects: Reply to Crits-Christoph, Tu, and Gallop (2003) and Serlin, Wampold, and Levin (2003).

In their comments on the authors' article (see record 2003-10163-009), R. C. Serlin, B. E. Wampold, and J. R. Levin (see record 2003-10163-011) and P. Crits-Christoph, X. Tu, and R. Gallop (see record 2003-10163-010) took issue with the authors' suggestion to evaluate therapy studies with nested providers with a fixed model approach. In this rejoinder, the authors' comment on Serlin et al's critique by showing that their arguments do not apply, are based on misconceptions about the purpose and nature of statistical inference, or are based on flawed reasoning. The authors also comment on Crits-Christoph et al's critique by showing that the proposed approach is very similar to, but less inclusive than, their own suggestion. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Electrostatic destabilization of water-in-crude oil emulsions: Application to a real case and evaluation of the Aibel VIEC technology

In the current study, the Aibel Vessel Internal Electrostatic Coalescer (VIEC) technology was tested for a real case scenario encountered in the production train of a UK oil field. Depressurized samples were collected both upstream and downstream of the first stage separator. The separation performance was discussed with respect to water cut and droplet size distribution of the emulsions, and the effect of chemical treatment. Issues with respect to representative sampling and testing have been discussed. The application of an external AC electrical field has been shown to significantly enhance the separation of the aqueous phase from tight emulsions, both when it was used alone and in combination with a commercial demulsifier. By using the VIEC technology, the time for separation could be reduced from 8 min to 2 min and the overall BS&W in the emulsions was improved from 45% or 60% to a residual water content of 5-20%. Destabilization of a 45% water-in-oil emulsion by electrical and chemical treatment (20/40 ppm) produced oil in the 2-7% BS&W range whereas the corresponding tests without applying an electrostatic field led to a BS&W greater than 25%. The achieved results strongly suggest that the VIEC technology can resolve the stable emulsion bands encountered in the Schiehallion train and add flexibility or increased production rate to the process. The results also suggest the importance of further studies on the destabilization performances achieved by electrostatic means.     

Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

高温合金表面激光熔敷热障涂层组织结构与氧化性能

采用 5KW连续CO2 激光器对Ni基高温合金上二次重熔NiCoCrAlY和ZrO2 陶瓷层进行了研究。结果表明 :激光快速熔化和凝固获得定向外延生长、紧密堆积的柱状晶氧化锆陶瓷层。NiCoCrAlY结合层与柱状晶之间存在氧化铝层 ,保证了柱状晶与NiCoCrAlY层的联结。扫描电镜和电子探针联合分析发现 ,氧化锆层与NiCoCrAlY结合层、结合层与基体间均为冶金结合。采用化学改性氧化锆消除了涂层裂纹。高温氧化性能测试得出激光重熔试样氧化动力学近似地遵守抛物线速率方程。在 12 0 0℃ ,空气下激光熔敷TBCs 抗氧化性明显高于等离子喷涂TBCs。     

高铝钛镍基合金晶粒度的研究

研究了对高温镀镍基高温金晶粒度的影响因素。以便减少晶粒度不合格废品，结果表明，在冶炼工艺和变形量一定的条件下，碳含量、高温带加热时间和终轧温度是影响晶粒度的关键因素。     

AgWC12C3的粉末粒度对产品密度的影响

粉末粒度对粉末制品的性能具有重要的影响,而这些影响主要通过改善材料的密度来达到。该文根据模拟粉末堆积模型,确定相对合理的粒度组成,并通过试验予以验证。     

Physical Properties Important to Electrostatic and Non electrostatic Powder Transfer Efficiency in a Tumble Drum

ABSTRACT: Popcorn was oiled and coated in a tumble drum nonelectrostatically and electrostatically with sugar, cornstarch, salt, cellulose, maltodextrin, all-purpose flour, whole-wheat flour, or soy flour. Particle size, density, flowability, and chargeability were correlated to transfer efficiency using regression analysis. Of the various methods to measure chargeability, charge-to-mass and adhesion improvement were the most significant. For nonelectrostatic coating, small, dense, free-flowing powders were most efficient. Small, free-flowing highly charging powders were most efficient for electrostatic coating. Percent improvement was the highest for the least efficient powders. The greatest benefit with electrostatic coating was for low density, highly charging powders with no effect of size.