建立加气砼直观数理模型的探索

若视加气砼为细观的“两相”材料,则可建立起其细观几何结构的随机直观数理模型,本文应用随机几何的方法探索了加气砼最佳合理内部细观几何结构模型的建立,及其计算机随机模拟,由细观角度讨论了改善加气砼性能的可能性。     

压缩弧光等离子束熔覆层中晶相与非晶相

用压缩弧光等离子束在 45钢表面熔覆Fe Cr Si B粉末涂层 ,采用能谱、透射电镜、电子探针对熔覆层结构进行分析。结果表明 ,熔覆层中晶相与非晶相并存 ,晶相由A(Me)、F(Me)、Me2 3 C6 等相组成 ,且 [2 11]A∥ [2 11]Me2 3 C6 ,(111) A ∥ (111) Me2 3 C6 ,(0 11) A ∥ (0 11) Me2 3 C6 ,即A与Me2 3 C6 保持共格关系 ,而[111]F∥ [32 1]Me2 3 C6 ,(10 1) F∥ (111) Me2 3 C6 。非晶相中Si、Cr等元素含量较高 ,从动力学和热力学两方面对非晶的形成进行了分析     

高空作业平台臂架伸缩运动的横向振动特性

为了探究高空作业平台做伸缩运动时变幅平面内的横向振动动力学特性,针对臂架的实际搭接和支承情况,将臂架等效为根部铰接、中间弹性支承且带有集中参数的变截面变长度梁. 基于牛顿第二定律建立各臂段的运动微分方程,采用模态叠加法、结合边界条件求解臂架一系列时刻的瞬态振型函数,曲线拟合时变参数以近似表示梁的振型,并依据伽辽金截断方法,得到广义坐标下的状态空间方程. 在Matlab/Simulink环境下进行动态仿真,得到伸缩过程中臂架头部的变幅平面横向振动动态响应. 结果表明,就横向振动振幅而言,搭接简化会带来15.63%计算结果误差;支承简化会加大臂架整体刚度、减小臂架振动响应,不可取。     

MICROSTRUCTURE STUDY OF CONSTITUENT PHASES IN 2024 SERIES Al ALLOYS

X-ray microanalysis,convergent beam electron diffraction(CBD)and selected area electrondiffraction(SAD)studies on the structures and compositions of the constituent phases in2024 series Al alloys have been conducted.Partial substitution of alloying elements is found tooccur in all the constituent phases,which cause small deviations from the stoichiometric com-positions reported in these ternary compounds.The dominant phase is α-Al_(12)(FeMn)_3Si whichhas a body center cubic crystal structure with the Im■ space group and a=1.25 nm.The nextdominant phase is Cu_2FeAl_7 which has a primitive tetragonal crystal structure with theP4/mnc space group and a=0.6336 nm,c=1.487 nm.The minor phase is α'-Al_(12)Fe_3Si hav-ing α primitive cubic crystal structure with the Pm■ space group and α=1.27 nm.     

单向受拉状态下钢纤维混凝土的二次峰值强度

不同于普通混凝土在单向受拉实验中的仅有唯一峰值强度,在大量钢纤维混凝土拉伸实验的应力应变曲线中均出现了两次峰值强度现象。本文采用黏结滑移模型考虑纤维在混凝土开裂面上的桥接作用,确定了钢纤维轴向应力与裂缝宽度之间的关系。钢纤维混凝土开裂后,将基体的软化模量与纤维增强作用的切线模量之和,作为判断第二峰值的依据。该值始终为非负时,钢纤维混凝土的应力-应变曲线具有唯一峰值强度;否则,应力-应变曲线中将具有二次峰值强度,并提出了钢纤维混凝土峰值强度的三种可能情况。建立了有限元模型以模拟钢纤维混凝土的拉伸试验,进一步研究了钢纤维掺量、长径比对混凝土开裂后力学性能的影响。并提出了钢纤维混凝土的抗拉强度的计算公式,可以有效地预测钢纤维混凝土的抗拉强度。     

离心铸造梯度功能材料凝固过程中第二相的迁移行为

金属液在离心铸造下将发生第二相质点的径向移动。本文分析了第二相质点的移动规律。     

Ti-25V-15Cr-2Al-2Mo-0.2C阻燃β钛合金的蠕变变形结构研究

采用TEM技术研究了具有不同热处理组织的Ti-25V-15Cr-2A1-2Mo-0．2C合金存在540℃，250MPa，100h蠕变作用后的变形结构。结果表明：位错环组是合金蠕变变形结构中的典型位错组态；合金的蠕变抗力随β基本上弥散分布的第二相析出数量的增加而提高。添加微量能提高蠕变抗力的合金元素，如Si元素等，是改善合金蠕变性能的可行途径。     

延缓与加速A1-Cu合金时效析出反应的研究

研究了溶质原子浓度、Si晶体第二相、残余形变、外加莫来石(Mullite)短纤维及其交互作用，对二元Al—Cu合金时效析出行为的影响。试验材料采用挤压铸造方法制备，复合材料中纤维体积分数为18％。实验结果表明：随溶质原子浓度的升高，A1-Cu二元合金中GP，θ″和θ′相的析出都得到了相应加快；Si含量超过一定值后，随Si含量增加，A1-Cu-Si合金中GP区形成受到抑制，而θ″和θ′相的析出得到加快；形变对GP区的抑制和对θ″，θ′和θ相的加速析出具有十分明显的作用；纤维本身除对GP区抑制和对θ″，θ′相的析出加速外，还会与溶质原子、合金元素或第二相以及残余形变交互作用，使GP区被抑制，而θ″，θ′甚至θ相被加速析出等现象进一步加强。用位错理论能较好地解释析出反应延缓与加速的微观机理。     

Analysis of Intermetallic Phases Formed on Surface Vapor Oxidized H13 Hot Work Steels in Molten Aluminum

In this paper, the author dipped surface vapor oxidized H13 steel specimens into 700℃ molten aluminum liquid for a certain period of time. Analyze the intermetallic phases formed on the H13 samples surface with optical microscope and X-ray diffraction method. The observation of immersion test sample's cross-section shows that Fe3O4 film will protect die substrate from molten aluminum erosion. The identification of the intermetallic phases reveals that they consist of 2parts, which is named as the composite layer and the compact layer. Further investigations are made in order to know the phase constituents of the 2 layers, they are Al8Fe2Si (outer composite layer), (AlCuMg) and Al5Fe2 (compact layer),respectively. The experimental results show that on the same specimen, a convex surface with bigger radius of curvature is more likely to be molten and the melting loss speed is also faster than a flat and smooth surface. The thickness of compact layer on a smooth surface is much bigger than that of the convex surface. Therefore, the author supposes the compact layer is favorable in stabilizing the die surface material from further melting loss, as their formation on the die surface, the melting loss speed will decrease.     

Effects of Sr/Ti-ratio in SrTiO3-based SOFC anodes investigated by the use of cone-shaped electrodes

In this work the A-site deficiency limit for undoped SrTiO₃, calcined in air or reducing atmosphere, was investigated. XRD and SEM analyses showed that when using the solid-state synthesis route it was difficult to achieve any A-site deficiency. Even very small deviations from unity in the Sr/Ti-ratio resulted in impurity phases. The effects of Sr/Ti-ratio on the performance of SrTiO₃ anodes for solid oxide fuel cells (SOFCs) was investigated by impedance spectroscopy with cone-shaped electrodes. The electrocatalytic activity of the SrTiO₃ cone samples, with various amount of reduced titanium dioxide phases (Magnéli phases), was investigated for oxidation of H₂ at 700 °C. High temperature treatment at 1000 °C, between the measurements at 700 °C, showed that high content of Magnéli phases leads to faster degradation of the activity. The suitability for using cone-shaped electrodes as a tool for investigating electrode materials is discussed.