Stabilization of inter-area and/or oscillatory modes in large-scale power system by voltage impedance power system (VIPS) apparatus based on decentralized control scheme

New technologies such as power electronics have made it possible to change continuously the impedance of a power system not only to control power flow but also to enhance stability. A power system incorporating a variable impedance apparatus such as a variable series capacitor (VSrC) and high-speed phase shifter (HSPS) is called VIPS (Variable Impedance Power System) by the authors. This paper proposes a novel control method of VIPS apparatus such as VSrC and HSPS installed at an interconnecting point for stabilizing inter-area unstable and/or oscillatory modes. The proposed design method of the control system is a kind of hierarchical decentralized control method of a large-scale power system based on a Lyapunov function. Under the proposed control scheme, each subsystem can be stabilized independently by local controllers such as AVR, speed governor and PSS, and then the whole interconnected system can be stabilized by VIPS apparatus taking into account interactions between subsystems. The effectiveness and robustness of the VIPS apparatus control are shown by numerical examples with model systems including a large-scale power system.     

Practical method for generation expansion planning based on dynamic programming

This paper presents an efficient method which provides the optimal generation mix and the optimal generation construction process. The approximation method in which the dynamic programming technique and gradient method are combined is applied to determine the optimal generation mix with hydropower generation technologies. The successive approximations dynamic programming (SADP) technique, which is very suitable for high-dimensional multistage decision process problems, is used for obtaining the optimal generation construction process. The effectiveness and feasibility of the developed technique are demonstrated on a practical power system model which has five types of generation technologies including a hydropower generation technology.     

Damage tolerance of glass mat/epoxy laminates hybridized with flexible resin under static and impact loading

This study deals with the impact property and damage tolerance of matrix hybrid composite laminates with different laminate constitution. The matrix hybrid composite laminates consisted of the laminae with a conventional epoxy resin and the laminae with a flexible epoxy resin modified from the conventional resin to avoid the interlaminar delamination. The impact energy absorption ratio greatly depended on the matrix resin placed at the impact face. The energy absorption was almost constant if the conventional resin was placed at the impact surface layer, while it increased exponentially with the increasing fraction of the flexible resin if the flexible resin was placed at the impact face. The impact energy was absorbed by the damage development and propagation in the laminate with conventional resin laminae as the impacted face, while it was absorbed by both the recoverable deformation of the flexible resin and the damage propagation in the laminate with flexible resin laminae as the impacted face.     

Flexible generation mix under multi objectives and uncertainties

Criteria for evaluating flexibility of a generation mix are presented, and an efficient computational algorithm for determining a flexible generation mix considering uncertainties in the power system expansion planning is developed. The flexible generation mix problem is formulated as a multiobjective optimization problem and solved by the dynamic programming technique in which type of generation plant is selected as a stage and generation capacity is selected as a state. The proposed method can treat easily not only the uncertainties but also many constraints of generation planning such as integer solutions of generation capacities, reliability constraints, and so on. The effectiveness and feasibility of the proposed method are demonstrated on a typical power system model     

The hydrogen-electrode reaction in the isotopically mixed system—II. Evaluation of the electrolytic separation factor of deuterium from the rest potential of the hydrogen electrode in the deuterium-containing system

The rest potential, E_r, of the hydrogen electrode in deuterium-containing hydrogen and a solution of light water as referred to the reversible hydrogen electrode in the light hydrogen and the same solution is formulated as a function of deuterium content of the gaseous hydrogen and the deuterium separation factor, S_b, in the hydrogen ionization reaction. It is shown that the relation is not significantly affected by the operative mechanism of the hydrogen-electrode reaction. Consequently, the relation provides a convenient method of evaluating S_b from the observation of E_r.

Experiments were carried out on Pt, Ni, Au and Ag in the system composed of deuterium-containing hydrogen and light water. The value of S_b as evaluated from E_r was practically independent of the deuterium content in the gaseous hydrogen. The values obtained were 1·1 for Pt in acidic and alkaline solutions, 1·6 for Ni in alkaline solution, 1·2 for Au and 1·5 for Ag, both in acidic solution. These values multiplied by the partition coefficient of deuterium between hydrogen and water (4·0 at room temperature) give approximate values of the deuterium separation factor in the hydrogen evolution reaction.     

The fluorescence behavior from SAM of dendron with rhodamine B as a center

We studied energy transfer between rhodamine B molecules centered in each corn-shaped dendrons that forms self-assembled monolayer (SAM) film on an Au substrate. A SAM film using dendron moiety as a spacer can change the distance between rhodamines depending on the size, so that the energy transfer from an initially photo-excited rhodamine to its surrounding molecules can be controlled. The absorption spectrum of a SAM film for each generation of dendron was measured to ascertain a linear correlation between the generation and the distance. Picosecond time-resolved fluorescence spectra showed clear differences in the fluorescence decay dynamics between third-generation (G3) and fourth-generation (G4) dendron SAM films. In addition, we found that “dry” or “wet” dendron SAM considerably influenced fluorescence behavior. As a result, the use of “wet” G4 SAM is suitable in preserving photo-excitation energy. This is because it gave almost equal dynamics to G4 dendron in the dilute solution and prevented deactivation by energy dissipation.     

Morphology transformations of pentacene on an UV-patternable polymer insulator and their effect on performance of flexible organic thin-film transistors

This work presents a low temperature with high resolution capability UV-patternable polymer, i.e. mr-UVCur06, for use as a gate insulator in OTFTs, by investigating the morphology transformation of pentacene deposited on the mr-UVCur06. The device structure is polyethylene terephthalate (PET)/indium-tin oxide (ITO)/mr-UVCur06/pentacene/Au (source/drain). In addition to its solution-processable capability, mr-UVCur06 is directly patterned by UV light in a low-temperature process. UV/ozone post-treatment of the patternable mr-UVCur06 can illuminate organic contaminants from its surface and increases surface energy. Experimental results indicate that a high surface energy existing at the mr-UVCur06 surface has produced in a larger ratio of I_{thin film phase}/I_{triclinic bulk phase} in pentacene. Then, the distance of pentacene molecular crystal structure, which is arranged in the thin film phase, is shorter than that in triclinic bulk phase. The performance of pentacene-based OTFTs can be enhanced with few contaminants and a high surface energy on the UV-patternable gate insulator. By performing UV/ozone post-treatment on the mr-UVCur06 insulator surface for 60 s, the OTFTs demonstrate a mobility, on/off drain current ratio, and V_T of 0.34 cm²/V s, 5.5 × 10⁴, and 2.5 V, respectively. Furthermore, the low-temperature photopatternable polymer dielectric paves the way for a relatively easy and low-cost fabrication of an OTFT array without expensive and complicated photolithography and dry etching.     

Optimized offset to eliminate first-order mode excitation at thejunction of straight and curved multimode waveguides

Applications to equip semiconductor phased-array wavelength demultiplexers with nonbirefringent waveguides are increasing. In several applications, the waveguides are multimodal and elimination of first-order mode excitation is required for their design. The optimized offset for eliminating the first-order mode excitation at the junction of straight and curved waveguides with a two-dimensional (2-D) structure is analyzed theoretically. We assume that the waveguide has a laterally symmetric index profile. By the perturbation method, the offset is obtained to the first order in the inverse of the bending radius. The offset is simply expressed by the effective refractive indices of the straight waveguide     

High-speed demonstration of an output interface driver forsingle-flux quantum systems

The high-speed operation of a one-channel output interface for a single-flux quantum (SFQ) system has been demonstrated. The interface consisted of a Josephson latching driver, a room-temperature semiconductor amplifier, and a decision circuit module. The Josephson latching driver was fabricated by using a 2.5-kA/cm² standard Nb junction process and used to amplify an SFQ pulse into a 5.5-mV level signal at 10 Gb/s. The interface converted the SFQ pulse signal into a nonreturn-to-zero signal having an amplitude of 1 V at 10 Gb/s