Analysis of brushless three-phase synchronous generator without exciter

Recently, a demand for small-capacity generators has been increasing as electric sources in small ships and automobiles or as portable electric sources driven by engines. It is desired that the structure of small-capacity generators be simple and robust, and that the generators be highly reliable, easily maintained and controlled. This paper describes an analysis of the original brushless synchronous generator without exciter. The output voltage can be adjusted in the wide range by controlling the stator dc current. To analyze the characteristics of this generator, the finite element method is applied. It is found that the results of theoretical analysis agree well with the experimental results.     

Steady-state torque control system with secondary-current feedback for three-phase squirrel-cage induction motors

This paper presents a highly stable steady-state torque control system with a feedback of a secondary current signal. The torque control system is constructed with a feedback of the secondary current (I₂) signal using a quick response magnetic-field sensor constructed with an amorphous core multivibrator bridge, which can solve the secondary resistance change problem for temperature variation in the IM. Moreover, we added a state feedback to the system to improve the response speed for the unit step function of a torque order. The I₂ sensor method has advantages especially at a low-speed range, in which conventional method using an integrator shows control errors.     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

Gel chromism and anomalous luminescence in poly(3-alkylthiophene)

The absorption spectrum of poly(3-alkylthiophene) gel changes drastically in association with a volume instability upon changing the solvent composition and also the temperature. In the expanded state in chloroform and at high temperature, the photoluminescence is much enhanced compared with the shrunken state in ethanol and at low temperature. This gel chromism and anomalous luminescence are discussed in terms of the change of effective conjugation length induced by the steric hindrance and the dynamics of the photoexcited species.     

Low-Temperature Physical Properties of Ba8Ni x Ge46?x (x?=?3,?4,?6)

Polycrystalline samples of type?I clathrate Ba₈Ni _x Ge_46?x (x?=?3, 4, 6) have been synthesized using a radio-frequency (RF) induction furnace. Ba₈Ni _x Ge_46?x samples show metallic-like behavior (d??/dT?>?0) with high resistivity at room temperature, and diamagnetic susceptibility at 2?K and 300?K. The charge carriers vary from n type to p type depending on the Ni stoichiometry. The carrier concentrations at 300?K are calculated to be 5.84(3)?e^?/cell for x?=?3, 2.29(1)?e^?/cell for x?=?4, and 3.29(1)?h⁺/cell for x?=?6. The deviation of the carrier concentrations from the values expected based on 4-bonded Ni suggests that vacancies may play a very important role in the electronic states. The effective carrier masses are estimated from the low-temperature heat capacity data.     

大豆脂肪氧化酶酶活性变化研究

采用分光光度法对大豆中三种脂肪氧化酶（同工酶）进行检测并测定脂肪氧化酶活性,研究表明：大豆粉碎后随着贮存时间的延长,脂肪氧化酶活性逐渐降低,大豆发芽后脂肪氧化酶活性降低了43%.     

Investigation of pathways of advanced glycation end-products accumulation in macrophages

Advanced glycation end-products (AGE) play a role in the pathogenesis of several diseases, including diabetic complications and atherosclerosis. In atherosclerotic lesions of human aortas, AGE are localized in the extracellular matrix and intracellularly in foam cells. Two interpretations are possible for AGE accumulation inside macrophages, one is endocytic uptake of extracellular AGE-proteins by scavenger receptors; the other is intracellular AGE formation inside the macrophages. In the present study, we determined the pathways involved in AGE accumulation inside macrophages. RAW 264.7 cells, a murine macrophage cell line, incubated with BSA and 1600 mM glucose for 40 weeks, recognized heavily modified AGE- BSA. In contrast, the cells showed no ligand activity for mildly modified AGE-BSA, prepared by incubating BSA with 50 mM glucose for 24 weeks. Nepsilon-(carboxymethyl)lysine (CML)-modified proteins of about 65 kDa were detected in human monocyte-derived macrophages incubated for 7 days with 30 mM glucose and phorbol myristate acetate. Furthermore, CML was generated when glycated protein was incubated with hypochloric acid. Taken together, our results indicate that AGE detected inside foam cells in atherosclerotic lesions are generated intracellularly rather than representing endocytic uptake of extracellular AGE-proteins by scavenger receptors.     

Metabolic disturbance of tryptophan-nicotinamide conversion pathway by putative endocrine disruptors, bisphenol A and styrene monomer

Bisphenol A, a monomer of polycarbonate plastics, disturbed the conversion pathway of the amino acid tryptophan to the vitamin nicotinamide. The conversion ratio of tryptophan to nicotinamide was reduced to 1/15 by feeding a diet containing 1% bisphenol A. A putative disturbing reaction is kynurenine-->3-hydroxykynurenine, which is catalyzed by kynurenine monohydroxylase. This is an FAD-enzyme and requires NADPH as a coenzyme. Styrene monomer (1% addition to a normal diet) did not affect the food intake or the body weight, but slightly reduced the conversion ratio of tryptophan-nicotinamide.     

Fire performance and decay resistance of solid wood and plywood treated with quaternary ammonia compounds and common fire retardants

In this study, the fire performance and decay resistance of solid wood and plywood treated with quaternary ammonia compounds (didecyl dimethyl ammonium chloride (DDAC) and didecyl dimethyl ammonium tetrafluoroborate (DBF)) were compared with the performance of untreated control specimens and specimens treated with common fire retardants ((monoammonium phosphate (MAP), diammonium phosphate (DAP) and ammonium sulphate (AS)). Test specimens were treated with 1% and 4% (% m/v) aqueous solutions of the chemicals. The fire performance tests were the fire tube test (ASTM E 69) which measures mass losses in the specimens and the cone calorimeter test (ASTM E 1354) which measures mass loss, heat release rate, time for sustained ignition, effective heat of combustion, and specific extinction area. The results from the cone calorimeter tests were used to estimate the flame spread index (FSI) in the Steiner tunnel test (ASTM E 84). Heat release rates of the specimens treated with MAP, DAP, and AS were lower than those of both DDAC and DBF-treated specimens and the untreated control specimens. Compared with the untreated specimens, higher heat release rates were observed for the specimens treated with the quaternary ammonia compounds, DDAC and DBF. The estimates for the FSI for DDAC and DBF were for values equal to or higher than for the untreated control specimens. At higher concentration levels, MAP, DAP and AS were effective in decreasing initial contribution of heat release to potential fire. Decay resistance tests were done according to AWPA E 10 standard method using one brown-rot fungus and one white rot-fungus. Decay resistance tests revealed that solid wood specimens treated with DDAC and DBF showed resistance against the fungi tested, however, MAP, DAP and AS did not provide complete protection. While DBF and DDAC increased resistance of plywood specimens, high mass losses in plywood specimens treated with MAP, DAP and AS were obtained.