电镀塑料制品对结构设计及成形工艺的要求

为保证电镀塑料制品的质量,提出了符合电镀要求的塑料制品设计原则,并且指出在注塑成形时,对塑料经过充分干燥,采用较高的注塑温度,较低的注射压力和较慢的注射速度,是使镀层获得良好结合强度的先决条件。     

High-pressure plastic flow in silicon: A first-principles theoretical study

Summary Microindentation experiments have recently shown that silicon can exhibit plastic flow when subjected to high pressure. Assuming that under these conditions the relevant reference structure is the -Sn high-pressure phase of silicon, we apply the magic-strain concept to explore the space of configurations that could describe the observed behavior. We use first-principles total-energy calculations (including full relaxation of the atomic basis for every structure) to evaluate the relevance of strained configurations. Using this approach, we were able to identify a low-energy path that corresponds to planar flow of the atoms. The atomic configurations along this path provide insight into possible microscopic motions under high pressure that may be relevant to plastic flow in silicon.     

砂土的剪胀方程及其塑性势(Ⅰ):发展现状

以能量守恒原理为主线,在各向同性前提下,对Taylor剪胀方程、Cam-clay剪胀方程、修正Cam-clay剪胀方程、Rowe剪胀方程和扩展的Rowe剪胀方程等进行了较全面的综述.论证了剪胀方程和塑性势函数之间的相互转化关系.指出了Lade-Kim塑性势函数和Nova塑性势函数的缺陷之处,即这两个塑性势函数均没有合理耦合临界状态这一概念.     

大塑性变形制备超细晶生物医用钛合金的研究进展

生物医用钛合金具有高强度、良好的耐蚀性能、较低的弹性模量、优异的生物相容性,已成为具有广阔应用前景的医用金属材料之一.与传统医用钛合金相比,超细晶医用钛合金具有更高的强度与更好的疲劳性能以及耐腐蚀性能.此外,超细晶钛合金可诱导骨组织向内生长,增加界面结合强度,加快骨修复进程,在硬组织修复材料领域具有广阔的应用前景.阐述了各种大塑性变形（Severe Plastic Deformation）法制备超细晶生物医用钛合金的研究状况与最新进展,指出了SPD法制备医用钛合金中存在的技术问题和发展方向,并展望了利用SPD法对生物医用钛合金改性将成为生物医用材料的研究热点.     

再生塑料内污染物迁移的有限元分析

建立计算仿真模型,该模型可用来预测再生塑料内污染物向液体产品(如食品)的迁移.该仿真模型的建立是基于有限元方法,可分析多层结构中的迁移.该项工作对于再生塑料尤其是有低阻隔性的聚烯烃在食品包装上的应用具有潜在意义.     

Minimum-Weight Design of Multipurpose Tie-Beam of Solid Cross-Section

The paper presents the minimum-weight design of an elastic, simply-supported member of solid cross-section that is to act as a tie for a part of its design life and as a beam for the rest, but not both at any given time. Upper bounds are prescribed on the longitudinal elongation under an axial tension and on the maximum deflection under a transverse concentrated load. The range of constraints is divided into regions of possible single-purpose minimum-weight designs. The effectiveness of optimization is judged against a prismatic bar having the same transverse stiffness.     

低合金钢靶板受尖头弹冲击的变形与断裂

研究了低合金钢板在尖头弹冲击条件下的侵彻过程,讨论了应力条件和材料冶金质量对损伤和断裂的影响。结果表明,在侵彻过程前期靶材主要表现为三向压应力下的塑性流动;中期,靶材挤压流动,靶材内部的流速差造成剪切变形,并导致沿轧制偏析带的开裂;后期,靶材在剧烈剪切作用下剪切变形、局部失稳、形成剪切带和沿剪切带的开裂或撕裂。断裂按微孔聚集型机制进行。通常所谓花瓣型开裂实质上就是上述在切应力作用下的剪切撕裂。     

Progress in Thermal Contact Resistance

The developments of aeronautics and astronautics require engines of higher quality. The temperature distribution in combustion engine is highly influenced by the thermal conduct resistance. To predict the temperature field of the hot-end assemblies of combustion engine, the thermal contact resistance must be considered. The object of the study is to propose a model of high application including in conditions of high temperature and high pressure. Up to date, many models and empirical or semi-empirical corre...     

塑料小盖注射模设计

通过对塑料小盖的工艺分析,合理地确定了模具中的浇注系统、脱模机构以及冷却系统等结构形式。并介绍了该模具的工作过程以及模具制造和装配过程中的要点。     

西北地区铁塔基础混凝土塑料薄膜养护工艺

根据西北地区气候特点,采取塑料薄膜对基础混凝土予以养护。养护后混凝土表面质量美观,满足质量工艺要求,值得以后在西北地区铁塔基础混凝土养护施工借鉴。