Micromachined piezoelectric force sensors based on PZT thin films

A micromachined lead zirconate titanate (PZT) force sensor for scanning force microscope (SFM) is conceptualized by its piezoelectricity. The fabrication procedure is interpreted, and mechanical characteristics of the micromachined PZT force sensors with various lengths are studied in this paper. A compact SFM is constructed by using the piezoelectric PZT sensor. A very clear image is taken by this SFM. The current study of the micromachined PZT force sensor can be considered as a breakthrough of design of SFM as well as a good example of integrated piezoelectric microdevices     

Monte Carlo simulation of hydrogen absorption in palladium and palladium–silver alloys

A modified Monte Carlo (MC) simulation was performed to investigate the hydrogen absorption behavior in Pd and Pd–Ag alloys of the composition Pd_xAg_1−x (x=0.7–0.8) under H₂ pressure (0.1 MPa) at different temperatures. The present method employed can consider the dissociative adsorption of hydrogen molecule and the subsequent absorption of hydrogen atom by formalizing the relationship between the pressure of hydrogen molecule and hydrogen atom. The potential parameters were determined to reproduce the solution enthalpy of hydrogen in pure metals. The results are in good agreement with experimental findings as well as previous theoretical studies. We confirmed that our method is useful to simulate the absorption of hydrogen in metals and alloys.     

Integrated-optic dispersion slope equalizer for N/spl times/ several tens of Gb/s WDM transmission

We report a dispersion slope equalizer on a planar lightwave circuit for wavelength division multiplexing (WDM) transmission. This device consists of an array of lattice-formed equalizers with different compensation values fabricated on one wafer and arrayed-waveguide gratings for wavelength multi/demultiplexing. We describe its configuration, operational principle, parameter design, fabrication, and measured characteristics in detail. N/spl times/20 and N/spl times/40 Gb/s slope equalizers were fabricated and their characteristics agreed well with designed values. We also report a reduction in the bias electrical power needed for thermooptic phase shifters in the equalizer array that we realized by employing a phase trimming technique normally used for optical switches.     

Thermal cis–trans conversion in thiophene oligomers

Thermal cis–trans conversion has been examined in oligothiophene single molecules encapsulated in the molecular vessels of cyclodextrin and Na-mordenite. At high temperatures, optical absorption intensities are enhanced in bithiophene, terthiophene and quinquethiophene, while the intensity of quarterthiophene is temperature independent. Optical absorption comes from uncompensated transition dipole moment due to the thermal torsion between cis and trans forms.     

Design of a 1-MW,CW coaxial gyrotron with two gaussian beam outputs

The design of a 170 GHz, 1 MW-CW gyrotron for electron cyclotron heating of nuclear fusion plasmas is presented. The designed gyrotron incorporates a coaxial cavity to reduce mode competition, and a coaxial electron gun to support the cavity inner conductor. A new mode converter splits the generated wave into two beams and radiates them in different directions. The radiated beams are transmitted to two output windows through two mirror systems, being transformed into Gaussian-like beams. A single-stage depressed collector improves the overall efficiency of the gyrotron and reduces the heat flux to the collector surface.     

Analysis of a new configuration of coplanar stripline

A new configuration of coplanar stripline is presented and analyzed. This configuration is derived by augmenting coplanar stripline (CPS) with electrically wide lateral ground planes on either side of the balanced pair of signal lines. The ground planes should replace line-to-line coupling in complex circuits and eliminate the TE₀ parasitic dielectric slab waveguide mode. Also, the spacing from signal lines to ground planes can be adjusted to change the characteristic impedance. Spectral domain analysis is used to calculate the dispersion characteristics of this transmission line. Analytical expressions for quasi-static values of the line are presented. This configuration of CPS should be useful for balanced high-impedance lines in monolithic microwave integrated circuit (MMIC) and high speed digital circuits     

A 120-mm2 64-Mb NAND flash memory achieving 180 ns/Byteeffective program speed

Emerging application areas of mass storage flash memories require low cost, high density flash memories with enhanced device performance. This paper describes a 64 Mb NAND flash memory having improved read and program performances. A 40 MB/s read throughput is achieved by improving the page sensing time and employing the full-chip burst read capability. A 2-μs random access time is obtained by using a precharged capacitive decoupling sensing scheme with a staggered row decoder scheme. The full-chip burst read capability is realized by introducing a new array architecture. A narrow incremental step pulse programming scheme achieves a 5 MB/s program throughput corresponding to 180 ns/Byte effective program speed. The chip has been fabricated using a 0.4-μm single-metal CMOS process resulting in a die size of 120 mm² and an effective cell size of 1.1 μm²     

Irregular sampling theorems for wavelet subspaces

From the Paley-Wiener 1/4-theorem, the finite energy signal f(t) can be reconstructed from its irregularly sampled values f(k+δ_κ) if f(t) is band-limited and sup_κ|δ_κ|<1/4. We consider the signals in wavelet subspaces and wish to recover the signals from its irregular samples by using scaling functions. Then the method of estimating the upper bound of sup_κ|δ_κ | such that the irregularly sampled signals can be recovered is very important. Following the work done by Liu and Walter (see J. Fourier Anal. Appl., vol.2, no.2, p.181-9, 1995), we present an algorithm which can estimate a proper upper bound of sup_κ |δ_κ|. Compared to Paley-Wiener 1/4-theorem, this theorem can relax the upper bound for sampling in some wavelet subspaces     

Metamaterial-based electronically controlled transmission-line structure as a novel leaky-wave antenna with tunable radiation angle and beamwidth

A metamaterial-based electronically controlled transmission-line structure is presented and demonstrated as a novel leaky-wave (LW) antenna with tunable radiation angle and beamwidth functionalities. This structure is, in essence, a composite right/left-handed (CRLH) microstrip structure incorporating varactor diodes for fixed-frequency voltage-controlled operation. Angle scanning at a fixed frequency is achieved by modulating the capacitances of the structure by adjusting the (uniform) bias voltage applied to the varactors. Beamwidth tuning is obtained by making the structure nonuniform by application of a nonuniform bias voltage distribution of the varactors. A rigorous analysis based on an extension of the CRLH concept is proposed and the corresponding dispersion curves, obtained by equivalent-circuit formulas with LC parameters extracted from full-wave simulation, are shown. A 30-cell LW antenna structure, incorporating both series and shunt varactors for optimal impedance matching and maximal tuning range, is designed. This prototype exhibits continuous scanning capability from 50/spl deg/ to -49/spl deg/ by tuning the bias voltages from 0 to 21 V at 3.33 GHz. A maximum gain of 18 dBi at broadside is also achieved. In addition, it provides half-power beamwidth variation of up to 200% with comparison to the case of uniform biasing. The effect of intermodulation due to the nonlinearity of the varactors is shown to be negligible for antenna applications. The antenna is tested in a 10-Mb/s binary phase-shift keying transmission link and successful recovery of the baseband data is demonstrated.