A comparison study into low leak rate buoyant gas dispersion in a small fuel cell enclosure using plain and louvre vent passive ventilation schemes

Hydrogen, producing electricity in fuel cells, is a versatile energy source, but with risks associated with flammability. Fuel cells use enclosures for protection which need ventilating to remove hydrogen emitted during normal operation or from supply system leaks. Passive ventilation, using buoyancy driven flow is preferred to mechanical systems. Performance depends upon vent design, size, shape, position and number. Vents are usually plain rectangular openings, but environmentally situated enclosures use louvres for protection. The effect of louvres on passive ventilation is not clear and has therefore been examined in this paper. Comparison ‘same opening area’ louvre and plain vent tests were undertaken using a 0.144 m³ enclosure with opposing upper and lower vents and helium leaking from a 4 mm nozzle on the base at rates from 1 to 10 lpm, simulating a hydrogen leak. Louvres increased stratified level helium concentrations by typically in excess of 15%. The empirical data obtained was also used in a validation exercise with a SolidWorks: Flow Simulation CFD model, which provided a good qualitative representation of flow behaviour and close empirical data correlations.     

Corrosion behaviour and mechanism of 6082 aluminium alloy in NaCl and Na2SO4 etchants

The corrosion behaviour of 6082 aluminium alloy was studied by measuring the electrochemical impedance spectra and electrode polarization curves. After the electrochemical tests, a microstructural analysis of the samples was conducted by using optical microscopy and electron scanning microscopy techniques to determine the corrosion mechanism. The results show that the Nyquist plot of the electrochemical impedance data in the NaCl solution consists of high- and low-frequency capacitive impedance loops. When ions are added to the NaCl etchant, the Nyquist plots of the electrochemical impedance data are composed of two different curves: a high-frequency capacitive impedance loop and a low-frequency inductive impedance loop. The corrosion current density increases with increasing concentration, and as a result, the corrosion resistance of the aluminium alloy decreases. The microstructures of 6082 aluminium alloy consist of Mg₂Si secondary particles in a large α-Al matrix. Pitting corrosion initially occurs at the boundary between the matrix and secondary particles because the electrode potentials of the matrix and secondary particles are different. Then, corrosion paths develop along the network-like grain boundaries, and finally, massive network-like corrosion occurs throughout the entire alloy.     

Novel high-energy ionic molecules deriving from new monovalent and divalent 4-oxyl-3,5-dinitropyrazolate moieties

ABSTRACT

In recent years, the exploration of a practical strategy for novel energetic molecules with high energy and low sensitivity is very desirable but highly challenging. Novel ionic energetic molecules have attracted much attention in this area due to their prominent advantages including low sensitivities, high thermal stability, and excellent energy performances. Herein, five different ionic energetic molecules based on new monovalent and divalent 4-oxyl-3,5-dinitropyrazolate moieties with enhanced oxygen balance have been synthesized, characterized and evaluated as potential high-energy materials. Thermal stability, sensitivities and energy output test were measured and studied in detail. The heats of formation and energetic parameters were calculated by using Gaussian 09 suite of programs and EXPLO 5 code. The results suggest that all as-prepared new molecules exhibit good thermal stability with high decomposition temperature (3, 231°C; 5, 160°C; 6, 185°C; 7, 180°C; 8, 213°C), and relative low sensitivity (IS > 20 J, FS = 324 N). Inheriting the significant oxygen content of monovalent and divalent 4-oxyl-3,5-dinitropyrazolate moieties, they also possess good energy properties (v _D = 8238 ~ 9208 m s^?1, P = 26.8 ~ 36.7 GPa, V _o = 481.8 ~ 959.4 L kg^?1), which make them competitive high-energy materials.     

The analysis for morphological evolution and crystallography of degenerate pearlite in 100Mn13 steel

During approximate 773 K aging treatment of 100Mn13 steel, degenerate pearlite will occur and evolve into lamellar pearlite during growth process. The microstructures of degenerate pearlite and its evolutionary lamellar pearlite are observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that after 748 K, 773 K and 798 K aging, degenerate pearlites occur at grain boundary. At growth front of degenerate pearlite forming at 773 K and 798 K, pearlite presents a morphology of short lamellae of carbide and ferrite, indicating a trend of developing into lamellar pearlite. The higher the temperature is, the more obvious the trend is, and even a conventional lamellar pearlite has developed. However, there is no morphological evolution for degenerate pearlite forming at 748 K aging. Besides, the constituents of degenerate pearlite is identified as M₂₃C₆ and ferrite, and Kurdjumov-Sachs orientation relationship exists between them, (01 )_α//( 1 )_M23C6, [111]_α//[110]_M23C6. This orientation relationship maintains in morphological evolution from degenerate pearlite to lamellar pearlite.     

Research on corrosion performance of 6061 aluminum alloy in salt spray environment

Salt spray corrosion test was carried out on 6061 aluminum alloy, and quasi-static tensile test at room temperature was carried out on the sample with universal testing machine. The effect of salt spray corrosion on the mechanical properties of 6061 aluminum alloy was studied by scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and electrochemistry. The corrosion rate of 6061 aluminum alloy was quantitatively characterized by different corrosion parameters. It was found that local corrosion of 6061 aluminum alloy occurred in salt spray environment, mainly pitting corrosion and intergranular corrosion. With the increase of corrosion time, the polarization resistance of 6061 aluminum alloy decreases, and the corrosion rate significantly increases. The average corrosion rate and the maximum corrosion rate of 6061 aluminum alloy were characterized by corrosion weight loss and corrosion pit depth. And they can be transformed into each other. The mechanical properties of 6061 aluminum alloy were mainly affected by the depth of corrosion pit. With the increase of corrosion time, the tensile strength and fracture strain decreased, resulting in poor plasticity of the sample. At the same time, the change of elongation of 6061 aluminum alloy can be accurately predicted by the depth of corrosion pit.     

Effect of temperature on nitinol electropolishing

1IntroductionIn recent years,the study of surface preparation has attracted considerable attention due to its poten-tiallyi mportant effect on properties of Ni Ti medical components.Amongthose surface treat ment methods,electropolishing has attracted a great attention for its distinctive advantages.Electropolishing removesslag,burrs,scratches,heat affected zones and creates a new,smoother surface.The polishing rate can becarefully adjusted within tight tolerances to meet different requirement…     

水煤浆喷嘴材料的应用研究

水煤浆技术是我国洁净煤发展战略的重要组成部分 ,而喷嘴是水煤浆燃烧器中的关键部件之一 ,喷嘴材料的抗磨和抗热冲击性能直接影响水煤浆应用的经济性和安全性。文章对国内外水煤浆喷嘴材料的研究和应用进行了评述 ,并提出了今后水煤浆喷嘴材料的研究和发展方向。     

工字形铝合金偏心压杆平面外稳定承载力研究

运用ANSYS软件对工字形铝合金偏心压杆平面外稳定承载力进行了研究,分别讨论初弯曲、残余应力和截面厚度偏差等缺陷对杆件平面外稳定承载力的影响,提出稳定系数曲面的概念,指出平面外稳定系数是相对偏心率e′和相对长细比λ的二元函数,在空间上为一连续的曲面。并对不同截面尺寸杆件的平面外稳定系数进行大量计算分析,以此为基础拟合出了平面外稳定系数曲面=f(λ,e′)的函数表达式,可供设计参考。     

低温钢A333 Gr.6的焊接

以3×104t/a聚丙烯装置低温管线的焊接为例,分析了低温钢A333 Gr.6的焊接性,并介绍焊接材料的选用以及焊接注意事项,制定焊接工艺并进行实施。     

Machining of NiTi-shape memory alloys-A review

The emerging trends in the development of advanced smart materials with better unique properties under different environments for a particular application fascinate the researchers and industrialists. Nickel-Titanium based shape memory alloys are exotic materials due to their unique properties such as SME, SE, high damping characteristics, high corrosion and wear resistance and biocompatibility. This article presents an overview of machining processes that can be used to machine the NiTi and its surface induced characteristics such as microhardness, surface roughness, topography, induced layer, residual stress, fatigue and phase transformation. The surface integrity characteristics are discussed for machining of NiTi-SMAs under the category of traditional, non-traditional and micro-machining with the effect of input parameters such as cutting speed, feed, depth of cut, type of lubricant and type of coating material on cutting tool. The conventional machining of NiTi alloys are quite complicated due to high toughness, severe strain hardening, fatigue hardening and distinctive property of NiTi-SMAs such as pseudoelastic and shape memory effect. From this study, non-traditional process is significantly used to machine the NiTi-SMAs due to its better results on surface integrity characteristics. Consequently, future trends are also identified for machining the NiTi-SMAs and to improve the surface integrity characteristics.