不同进水流速对泵站进水池漩涡的影响

为探究泵站进水流速大小与泵站进水池水流流态、漩涡的产生与发展变化规律,结合泵站实际运行情况,建立引渠、前池、进水池和进水管的泵站物理模型和湍流数学模型,采用VOF模型和非定常的SST k-ω湍流模型对9种不同流速的泵站进水水流特性进行数值模拟,分析不同进水流速的泵站进水池水流流场分布、漩涡涡量的变化及分布规律。研究结果表明:当进水流速为0.322 2～0.564 2 m/s时,泵站表面漩涡的强度随进水流速的增大而增强:当进水流速为0.322 2～0.401 6 m/s时,进水池出现Ⅲ、Ⅳ型漩涡;当进水流速为0.483 5 m/s时,进水池出现Ⅴ型漩涡;当进水流速为0.520 8～0.564 2 m/s时,进水池出现Ⅵ型漩涡。将数值计算结果与模型试验结果进行对比,两者基本吻合。研究结果可为泵站工程设计提供参考。     

Dialogic weaving: a favorable tension between design and craft

Focusing on a process where a designer embeds herself in craftspeople’s workshops with the intention of ‘learning from inside’ and ‘making together’; this paper proposes pathways for considering collaboration between designers and craftspeople via digital fabrication and weaving. The tension of forces that make weaving possible, act as an analogy for this collaboration as well as providing the title of the project as ‘One Over, One Under’. The project proposes a mode of working and a spectrum of outcomes where the designer has a first-hand experience of production techniques, engages in a serious and continuous dialogue through making, and develops an intervention that also brings forth her own skill set (introducing digital fabrication and structural variations), thus transforming the conventions and boundaries between established roles and manufacturing techniques. An experiment that resulted in a series of objects considering both the technologies of production and the input of the designer, this process not only increases the potentials that crafts hold for the field of design, but it also offers possibilities of collaboration and a further articulation of the design act.     

Moulded pulp products manufacturing with thermoforming

For an effective optimization of pulp thermoforming and of the moulded pulp products manufactured by this process, a full understanding of the process physics combined with full knowledge of the pressing equipment is necessary. For this reason, in this Addendum, we clarify how the process parameters “Holding time,” “Vacuum time,” “Cycle time,” and “Temperature” were interpreted and subsequently defined for the analysis of the process and product‐related outputs of the thermoforming experiments.     

A comparison study into low leak rate buoyant gas dispersion in a small fuel cell enclosure using plain and louvre vent passive ventilation schemes

Hydrogen, producing electricity in fuel cells, is a versatile energy source, but with risks associated with flammability. Fuel cells use enclosures for protection which need ventilating to remove hydrogen emitted during normal operation or from supply system leaks. Passive ventilation, using buoyancy driven flow is preferred to mechanical systems. Performance depends upon vent design, size, shape, position and number. Vents are usually plain rectangular openings, but environmentally situated enclosures use louvres for protection. The effect of louvres on passive ventilation is not clear and has therefore been examined in this paper. Comparison ‘same opening area’ louvre and plain vent tests were undertaken using a 0.144 m³ enclosure with opposing upper and lower vents and helium leaking from a 4 mm nozzle on the base at rates from 1 to 10 lpm, simulating a hydrogen leak. Louvres increased stratified level helium concentrations by typically in excess of 15%. The empirical data obtained was also used in a validation exercise with a SolidWorks: Flow Simulation CFD model, which provided a good qualitative representation of flow behaviour and close empirical data correlations.     

Novel high-energy ionic molecules deriving from new monovalent and divalent 4-oxyl-3,5-dinitropyrazolate moieties

ABSTRACT

In recent years, the exploration of a practical strategy for novel energetic molecules with high energy and low sensitivity is very desirable but highly challenging. Novel ionic energetic molecules have attracted much attention in this area due to their prominent advantages including low sensitivities, high thermal stability, and excellent energy performances. Herein, five different ionic energetic molecules based on new monovalent and divalent 4-oxyl-3,5-dinitropyrazolate moieties with enhanced oxygen balance have been synthesized, characterized and evaluated as potential high-energy materials. Thermal stability, sensitivities and energy output test were measured and studied in detail. The heats of formation and energetic parameters were calculated by using Gaussian 09 suite of programs and EXPLO 5 code. The results suggest that all as-prepared new molecules exhibit good thermal stability with high decomposition temperature (3, 231°C; 5, 160°C; 6, 185°C; 7, 180°C; 8, 213°C), and relative low sensitivity (IS > 20 J, FS = 324 N). Inheriting the significant oxygen content of monovalent and divalent 4-oxyl-3,5-dinitropyrazolate moieties, they also possess good energy properties (v _D = 8238 ~ 9208 m s^?1, P = 26.8 ~ 36.7 GPa, V _o = 481.8 ~ 959.4 L kg^?1), which make them competitive high-energy materials.     

三级连续碳化法生产纳米碳酸钙新工艺研究

采用有效容积依次递增的预塔、中塔、后塔三个碳化塔串联,塔内气液连续逆流操作、塔间气液连续并流或错流操作,严格控制氢氧化钙浆液的浓度、流量、温度和碳化气的浓度、流量,并通过pH计或电导仪进行跟踪检测碳化度,可实现纳米碳酸钙生产工艺连续化、产品质量稳定化、产量规模化.     

影响综合机械化采煤的因素分析

总结和分析了影响综合机械化采煤的煤层厚度、煤层倾角、煤层顶底板、煤层机构的破坏等因素。     

空压机站的振动与噪声治理

分析了空压机站振动和噪声产生的原因,提出了减振消声的具体办法,介绍了振动与噪声治理工程取得的成果。     

大功率全数字磁场换向直流调速系统中应注意的问题

通过介绍磁场换向原理,使用MATLAB仿真并结合现场实际的数据,讨论了全数字磁场换向直流调速系统中应注意的一些问题。     

爆破效果综合评价的模糊层次分析法模型

爆破效果受多种因素的制约和影响。本文建立了爆破效果综合评价的11因素模糊层次分析法模型，并以某露天矿的爆破效果为例，介绍了本模型的运用，结果表明评价结果与实际相一致。