Gasification of Biogenic Solid Fuels

As a result of shrinking fossil fuels, biomass as a regenerative energy source gains importance. To realize biomass projects it is essential to investigate in convenient thermal procedures. On this evidence an analysis and evaluation of diverse gasification technologies with different boundary conditions and diverse biomasses are indispensable. Form and kind of the biomass as well as the type of the gasification plant cause different compositions of the product gas. The gasifiers show advantages and disadvantages concerning the biomass and the produced gas quality, depending on reactor type, kind of heat supply, gasification medium, and the pressure ratio in the reactor. As the ideal gasifier for different biomass is presently not available, it will be shown, which biomass is suitable for fixed bed or fluidized bed gasifiers.     

Emergy account for biomass resource exploitation by agriculture in China

On the basis of Odum's ecological economic measure of emergy as embodied solar energy, a system account of biomass resource exploitation by agriculture in China 2004 is developed in this paper, which supplements a former study on corresponding long-term historical trends during 1978 to 2000 (Chen et al., 2006. Emergy-based analysis of the Chinese agriculture. Agriculture, Ecosystems and Environment 115, 161–173). The aggregate fluxes and indicators for biomass resource exploitation in China 2004 are calculated and illustrated when compared with those for 2000 to elucidate the latest status of the Chinese agriculture as the exploitation sector for biomass resource. Data sources and algorithm are presented in detail as basic references for related analysis involving the ecological economy of biomass exploitation in agriculture.     

Biogas and biomass technology: Energy generation from biomass and waste in the Netherlands

Within the European Community, the interest in energy generation from biomass and waste is increasing. A brief overview is given of several thermal conversion technologies, of biomass production and waste availability in the Netherlands. Based on this, the possibilities for energy generation from biomass and waste in the Netherlands are evaluated.     

IEA joint trials: New lessons from old plantations

Two international trials of potential biomass species families and clones planted in 1985 have been analyzed to determine changing patterns in growth, diseases, and insects. In the Swedish trial, with close spacing and short rotations, Salix viminalis clones gave the best average yield of 17.4 Mg/Ha/yr on the first coppice rotation. In the Minnesota, USA trial, with wider spacings and a longer rotation Populus alba hybrid clones gave the best average yields of 5.5 Mg/Ha/yr. The most important disease and insect problems encountered were Septoria musiva stem cankers on some Populus clones; frost die back in some Salix clones; and the leaf blotch miner, Fenusa dohrnii, on most Alnus families. Recommendations for future international cooperation in field trials are presented.     

Study of the potential valorisation of heavy metal contaminated biomass via phytoremediation by fast pyrolysis: Part II: Characterisation of the liquid and gaseous fraction as a function of the temperature

Fast pyrolysis of heavy metal contaminated birch (CMB), resulting from phytoremediation, is investigated. The effect of the pyrolysis temperature (673, 773, 873 K) on the composition and evolution of the bio-oil/tar fraction and the gas fraction has been studied. The knowledge of the composition of the gaseous and liquid pyrolysis fractions, as a function of the pyrolysis temperature, affects directly future applications and valorisation of the pyrolysis products and are indispensable for making and selecting the proper thermal conditions for their optimal use. In view of the future valorisation of this heavy metal contaminated biomass, the pyrolysis temperature is imperative, because some of the heavy metals can volatilize at temperatures generally used for the co-combustion or fast pyrolysis of biomass.     

Hydrothermal upgrading of wood biomass: Influence of the addition of K2CO3 and cellulose/lignin ratio

The hydrothermal treatment of two different wood biomass samples such as cherry (hard wood) and cypress (soft wood), whose composition is different i.e. lignin, cellulose and hemicellulose were performed at 280 °C for 15 min with aq. K₂CO₃ with different concentrations (0–1 M). The soft wood biomass contains higher lignin content than hard wood biomass. The cellulose rich cherry wood biomass produced higher proportion of acetic acid than cypress. The lignin rich cypress produced the hydrocarbons with major portion of phenolic hydrocarbons and derivatives than cherry. The total oil yields from both cherry and cypress wood biomass produced 50 wt% of liquid hydrocarbons at 280 °C for 15 min with 0.5 M K₂CO₃ solution. The volatility distribution of liquid hydrocarbons showed the characteristic features of soft and hard wood biomasses.     

The effect of the addition of chemical materials on the sintering of biomass ash

In this work the use of chemical materials (additives) in order to reduce the biomass ash sintering tendency is investigated. A total of seven additives (kaolin, limestone, lime, dolomite, calcined dolomite, ophite and alumina) and silica utilised as reference material were mixed in different proportions with the ash of five different biomasses, and then a laboratory sintering test was performed on the mixtures to determine the effect of the additives on the sintering. The biomasses studied in this work were: thistle biomass, brassica carinata biomass, barley straw, almond shell and orujillo (olive oil extraction residue). The sintering decrease among the additives was studied using X-ray diffraction.Kaolin, lime, calcined dolomite and ophite are proved to be suitable to reduce the biomass sintering in all the considered cases. Dolomite, limestone and, particularly, the tabular alumina, offer poorer results. The dilution of the biomass ash is considered the main process involved in the decrease of the sintering for most of the additives, with the exception of kaolin whose chemical reactions could be more important than the dilution effect.     

Enhancing sulphur self-retention by building-in CaO in straw–bitumen pellets

Combined straw–bitumen pellets have been proposed as an alternative fuel. An interesting finding is the potentiality of straw ash constituents to retain sulphur as bitumen that has relatively high sulphur content. The aim of the present work is to enhance sulphur self-retention to directly meet the environmental regulations by building-in CaO in the pellet instead of feeding sorbent separately. CaO powder has been mixed with the pellet constituents during production processes.     

Biomass pyrolysis in a circulating fluid bed reactor for the production of fuels and chemicals

An approach for biomass flash pyrolysis in a circulating fluid bed (CFB) reactor with continuous solids regeneration is described in this study. The unit is capable of performing conventional and catalytic biomass pyrolysis with the proper solid selection. The production of improved quality liquid products in a direct step through catalytic pyrolysis is investigated in this work. Both conventional and catalytic biomass pyrolysis can be effectively performed in this CFB unit. Flash pyrolysis conditions were achieved and liquid product yields of ∼70 wt% (on biomass feed) were obtained. The effect of specific operating variables including the type of inorganic solid material and the solid/biomass ratio was established on the final liquid product quality and yield. Solid materials considered included silica sand, a commercial fluid catalytic cracking catalyst and a ZSM-5 additive. Catalytic biomass pyrolysis generally leads to the production of additional water, coke and gases compared to conventional pyrolysis. However, the obtained liquid product quality and composition is improved.