A CEC-funded project has been performed to tackle the problem of producing an advanced Life Monitoring System (LMS) which would calculate the creep and fatigue damage experienced by high temperature pipework components. Four areas were identified where existing Life Monitoring System technology could be improved:
1. 1. the inclusion of creep relaxation
2. 2. the inclusion of external loads on components
3. 3. a more accurate method of calculating thermal stresses due to temperature transients
4. 4. the inclusion of high cycle fatigue terms.
The creep relaxation problem was solved using stress reduction factors in an analytical in-elastic stress calculation. The stress reduction factors were produced for a number of common geometries and materials by means of non-linear finite element analysis. External loads were catered for by producing influence coefficients from in-elastic analysis of the particular piping system and using them to calculate bending moments at critical positions on the pipework from load and displacement measurements made at the convenient points at the pipework. The thermal stress problem was solved by producing a completely new solution based on Green's Function and Fast Fourier transforms. This allowed the thermal stress in a complex component to be calculated from simple non-intrusive thermocouple measurements made on the outside of the component. The high-cycle fatigue problem was dealt with precalculating the fatigue damage associated with standard transients and adding this damage to cumulative total when a transient occurred.
The site testing provided good practical experience and showed up problems which would not otherwise have been detected. 相似文献
The study revealed that Fixed Price, Cost Plus and Purchased Labour contracts are the top three maintenance contracts adopted whilst Unit Price, Cost Plus A Percentage Fee contracts are alternatives used in the Kingdom. Some other types of maintenance contract were thought to be inappropriate by ministry departments. 相似文献
Abstract Research has demonstrated girls to outperform boys on conventional literacy tests. The present studies concern gender differences on computerised educational tests. Seventy-one children were tested using LASS Secondary and a set of seven conventional measures. No significant gender differences were found on any of the LASS Secondary modules, although females did outperform males on a conventional spelling test. A further 126 pupils were tested on computerised and paper versions of the LASS Secondary reading, spelling and reasoning modules. No gender differences were found on the computerised versions, but there were significant differences on the paper versions of the reading and spelling modules favouring females. In a third study, 45 children were administered computerised and paper versions of the LASS Junior reading and spelling modules. There were no significant differences on the computerised modules, but girls performed significantly higher than boys on the paper version of the spelling module. It is possible that computerised assessment does not detect the established gender effect due to differences between males and females in motivation, computer experience and competitiveness. Further large-scale studies are necessary to confirm these findings. 相似文献
Samples of chicken meat from spent laying hens were obtained by four different methods: (1) manual deboning of whole carcasses; (2) manual deboning of skinned carcasses; (3) mechanical deboning of whole carcasses; and (4) mechanical deboning of skinned carcasses. The meat was packaged, frozen and stored at ?18 °C for up to 3 months. Functional properties studied were pH, emulsifying capacity (EC) and water‐holding capacity (WHC) and, in addition, pigment concentration was investigated. Sensory properties included aroma, colour, texture and overall acceptability, as judged by a trained panel using a nine‐point hedonic scale. Removal of the skin prior to deboning by either method gave significantly higher values (P < 0.05) for EC, while WHC values were not significantly different among the experimental treatments, despite higher pH values for mechanically‐deboned meat, with and without skin. Pigment concentrations were highest in meat from Treatment 4 and lowest for Treatment 1, but values for both methods of deboning were affected by the presence of skin. There were no significant differences between treatments for any of the sensory properties studied. Changes occurring in the meat during frozen storage are described. 相似文献
Personal exposure in a displacement ventilated room is examined. The stratified flow and the considerable concentration gradients necessitate an improvement of the widely used fully mixing compartmental approach. The exposure of a seated and a standing person in proportion to the stratification height is examined by means of full-scale measurements. A breathing thermal manikin is used to simulate a person. It is found that the flow in the boundary layer around a person is able to a great extent to entrain and transport air from below the breathing zone. In the case of non-passive, heated contaminant sources, this entrainment improves the indoor air quality. Measurements of exposure due to a passive contaminant source show a significant dependence on the flow field as well as on the contaminant source location. Poor system performance is found in the case of a passive contaminant released in the lower part of the room close to the occupant. A personal exposure model for displacement ventilated rooms is proposed. The model takes the influence of gradients and the human thermal boundary layer into account. Two new quantities describing the interaction between a person and the ventilation are defined. 相似文献
This is the second part of a two-part review of human error identification (HEI) approaches in human reliability assessment (HRA). Part 1 reviewed the probabilistic risk assessment (PRA) context in which HRA occurs, and then detailed 12 HEI techniques which have evolved in the field of HRA. Part 2 attempts to compare the way these techniques perform against a range of criteria relevant to HEI theoretical and empirical validity, and practical usefulness in applied HRA. It is hoped that these comparisons will help assessors in the selection of techniques for practical applications. The comparisons also point to research and development needs in the area of applied HEI. 相似文献
A 3-D model of a protein can be constructed from its amino acidsequence and the 3-D structures of one or more homologues byannealing three sets of fragments: the structurally conservedregions, structurally variable regions and the side chains.The method encoded in the computer program COMPOSER was assessedby generating 3-D models of eight proteins whose crystal structuresare already known and for which 3-D structures of homologuesare available. In the structurally conserved regions, differencesbetween modelled and X-ray structures are smaller than the differencesbetween the X-ray structures of the modelled protein and thehomologues used to build the model. When several homologuesare used, the contributions of the known structures are weighted,preferably by the square of sequence similarity; this is especiallyimportant when the similarities of the homologues to the modelledstructure differ greatly. The collar extensionapproach, in which a similar region of different length in ahomologue is used to extend the framework, can result in a moreaccurate model. If known homologues comprise more than one relatedgroup of proteins and they are both distantly related to theunknown, then alignment of the sequence to be modelled witheach group of homologues facilitates identification of structurallyconserved regions of the unknown and leads to an improved model.Models have root mean square differences (r.m.s.d.s) with thestructures defined by X-ray analysis of between 0.73 and 1.56Å for all C atoms, for seven of the eight models. Forthe model of mucor pepsin, where the closest homologue has 33%sequence identity and 20% of the residues are in structurallyvariable regions, the r.m.s.d. for the framework region is 1.71Å and the r.m.s.d. for all C atoms is 3.47 Â. 相似文献
Thermodynamic properties and phase diagrams of the MCl–YCl3 (M=Na, K, Rb, Cs) systems were reassessed by using the CALPHAD method with the latest phase diagram data. A two-sublattice ionic solution model (M+)P(Cl−, , YCl3)Q reflecting the ionic behavior of the components was adopted to describe the liquid phase in the systems. A new set of optimized model parameters was found, and the calculated phase diagrams and enthalpies of mixing have good agreement with experimental data. The calculated liquidus near to YCl3 side agrees much better with experimental data compared with previous work. In consideration of high and low temperature modifications as well as stability of intermediate compounds, Gibbs energies of formation of these compounds evaluated in the present work are more reasonable. 相似文献
Both males and females ofRhabditis pellio release pheromones that attract the opposite sex prior to copulation. A quantitative bioassay for the female-produced pheromone was designed, based on male movement toward a pheromone source placed at one end of a 10-mm strip of bacterial material maintained on nutrient agar in a petri plate. Females produced pheromone from the age at which they attained the adult stage (3 days following hatching from the egg) and maintained a relatively constant production level until at least the ninth day of life. Similarly, males became responsive to the female pheromone by the third day and remained responsive through the ninth day, although the time required for the males to migrate toward a female pheromone source increased with increasing age. No daily rhythm of pheromone responsiveness by males or pheromone production by females was observed when the nematodes were conditioned to a 1212 h light-dark cycle. 相似文献