Deformation and failure study of surrounding rocks of dynamic pressure roadways in deep mines

In order to understand the change rules of stress-displacement in surrounding rocks of dynamic pressure roadways in deep mines and to obtain a theoretical basis for analyses of roadway stability and designs of support,we established a coupling equation of adjacent rock strength,mining stress and supporting resistance on the basis of an elastic-plastic theory of mechanics.We obtained an analytical solution for stress and displacement distribution of elastic and plastic regions in surrounding rock of dynamic pressure roadway..Based on this theory,we have analyzed the changes in stress-displacement in elastic and plastic regions of surrounding rocks of dynamic pressure roadways in the Haizi Coal Mine.The results show that:1) radial and tangential stress change violently within the first 4 m from the inner surface of a roadway after excavation;radial stress increases while tangential stress decreases within a range of about 6 m from the inner surface of the roadway as a function of q3;2) radial and tangential stress increase with an increase in the mining pressure coefficient k;the increase in the rate of tangential stress is greater than that of radial stress;3) the radial displacement of the inner surface of roadways decreases with an increase in q3,provided that k remains unchanged.     

Study on early warning index of spatial deformation for high concrete dam

Owing to the deficiency in early warning for high concrete dam,a formula was established to characterize the deformation behavior of high concrete dam as a whole.The early warning index of spatial deformation was calculated by low probability principle on the basis of the deformation entropy formula proposed.The steps were as follows.Firstly,the probability method was utilized to define the degree of order and degree of chaos for each survey point.Secondly,the weight distribution among the survey points was...     

顶管施工引起地表塌陷及关键技术分析

长距离大断面顶管施工不可避免的引起土体扰动和土层损失,导致土体塌陷和地表拉裂等现象.以某长距离超大断面顶管工程为工程研究背景,对顶管施工引起土体变形的机理展开了分析,对顶进施工过程中土体产生塌陷、地表出现张拉裂缝的原因进行了阐释,探讨了地表变位对周边建筑（构筑）物的影响,以及分析了该工程中运用的进出洞、中继器、触变泥浆减阻、加强现场监测、以及其他应急措施这5种关键控制技术,得到了一些保证工程施工安全的有益的经验.     

Influencing factors on elastic-plastic deformation of multi-layered surfaces under sliding contact

Stress distribution in the gradient multi-layered surface under a sliding contact was investigated using finite element method(FEM). The main structure parameters of layered surface discussed are total layer thickness,layer number and elastic modulus ratio of layer to the substrate. A model of multi-layered surface contact with rough slider was studied. The effect of the surface structure parameters on the elastic-plastic deformation was analyzed.     

赞比亚Lunzua水电站施工控制网的建立

文章结合工程实例,介绍南半球国家施工控制网的建立、平差与投影变形的解决方法.     

High-pressure plastic flow in silicon: A first-principles theoretical study

Summary Microindentation experiments have recently shown that silicon can exhibit plastic flow when subjected to high pressure. Assuming that under these conditions the relevant reference structure is the -Sn high-pressure phase of silicon, we apply the magic-strain concept to explore the space of configurations that could describe the observed behavior. We use first-principles total-energy calculations (including full relaxation of the atomic basis for every structure) to evaluate the relevance of strained configurations. Using this approach, we were able to identify a low-energy path that corresponds to planar flow of the atoms. The atomic configurations along this path provide insight into possible microscopic motions under high pressure that may be relevant to plastic flow in silicon.     

顾及多个因子的卡尔曼滤波法在大坝变形分析中的应用

首先建立大坝变形与时间相关关系的变形模型，从中找出变形与时间相关关系的最佳变形模型;然后考虑到库水位和温度对大坝变形的影响，建立变形与时间、水位、温度相关关系的变形模型;最后将变形与时间、水位、温度相关关系的变形模型的模型参数作为状态向量，用卡尔曼滤波法进行大坝变形分析。实例计算表明这种建模方法效果较好。     

大塑性变形制备超细晶生物医用钛合金的研究进展

生物医用钛合金具有高强度、良好的耐蚀性能、较低的弹性模量、优异的生物相容性,已成为具有广阔应用前景的医用金属材料之一.与传统医用钛合金相比,超细晶医用钛合金具有更高的强度与更好的疲劳性能以及耐腐蚀性能.此外,超细晶钛合金可诱导骨组织向内生长,增加界面结合强度,加快骨修复进程,在硬组织修复材料领域具有广阔的应用前景.阐述了各种大塑性变形（Severe Plastic Deformation）法制备超细晶生物医用钛合金的研究状况与最新进展,指出了SPD法制备医用钛合金中存在的技术问题和发展方向,并展望了利用SPD法对生物医用钛合金改性将成为生物医用材料的研究热点.