电子表格EXCEL5.0在选煤线性规划问题中的应用

采用电子表格软件ＥＸＣＥＬ５．０可以方便地解决许多选煤生产中的线性规划问题。本文通过选煤过程线性规划实例介绍ＥＸＣＥＬ５．０在此领域的应用方法。     

A feasibility study of a direct-mapping parallel processing method to solve linear equations in load-flow calculation

With the growing size and complexity of power systems, system analysis—such as transients calculation—takes much time. Hence, fast calculation methods are required. Although parallel processing is a hopeful method, there have been difficulties in the parallel solution of linear equations which appear in power-flow calculations by the Newton-Raphson method. This paper aims at the fast calculation of the power-flow problem by means of parallel processing. In order to improve the suitability to the parallel solution of the differential equation in transients calculation, we assume the use of a direct-mapping parallel processing machine to map directly the network of a power system onto a network of processors. Under this assumption, we propose a new parallel-processing-oriented method in which the linear equation is solved by linear iterations between nodes with Aitken acceleration. We simulate the method on three model power systems and compare this Parallel Iterative Method (PIN) with a Parallel Direct Method (PDM) which uses the banded matrix according to the number of operations required. As a result, we can expect that PIM may solve linear equations faster than PDM with m processors, although the PIM might be inferior to the PDM with m × m processors, where m denotes the half-band width of the banded matrix.     

Egg white powder in extruded fish crackers

Four levels of egg white powder (EWP), 0, 1.5, 3.0 and 4.5%, were added to fisfc cracker formulation consisting of tapioca starch, fish paste, and water. the mixture was extruded through a single screw extruder, and the extrudate was cut, dried, heated in a microwave, and the degrees of expansion, bulk density, colour and protein content were measured.
The addition of 1.5 and 3.0% EWP had no significant effect ( P < 0.01) on diametral and longitudinal expansion, however, 4.5% EWP significantly ( P < 0.01) reduced them. Bulk density and protein content of the final product increased as the percentage of EWP increased in the formulation. the total colour difference measurement showed a significant increase ( P < 0.01) in brown colouration at 4.5% EWP.     

Stability of large-scale coal-fired MHD channels

Stability of large-scale coal-fired MHD channels is studied by (1) linearized stability analysis, and (2) time-dependent 1-D analysis. The channel length is 15 m with 600 electrode pairs, and the output power ranges from 220.6 MW through 258.7 MW. Linearized stability analyses show that the Faraday channels operated with fixed loading resistance are stable, whereas the two waves of u and u–a (u, a: gas and sound velocity) become unstable in the Faraday channel with fixed loading factor. Two waves of u and u–a are unstable in the diagonal channel with fixed loading current and the u + a wave becomes unstable in the diagonal channel with fixed electrode current. Time-dependent one-dimensional analyses indicate that the Faraday channels with fixed load resistance are smooth without growth of fluctuation. The diagonal channels with fixed electrode current are smooth with no fluctuation, though the linear theory indicates that the u + a wave is unstable. The diagonal channel with fixed load current suffers large disturbance along the latter half of the channel, being consistent with the linearized analysis which indicates that the u - a and u waves are unstable.     

运动汽车图像静态视点平滑特征优化仿真

由于运动汽车图像在特征采集过程中,汽车处于高速运动状态,采集的过程无法与汽车完全同步,造成汽车的特征像素分量在高速运动中丢失,产生较大的像素运动噪声,使得汽车图像边缘高频特征因为运动干扰而模糊.传统的平滑过渡方法在对运动汽车图像进行平滑处理时,按照图像中像元灰度值计算突变特性,但受到像素丢失与噪声无法抑制的影响,无法解决运动汽车图像高频分量对图像像元灰度值的干扰问题.提出基于替身运动DR算法的运动汽车图像静态视点平滑过渡方法,用替身像素描述汽车在场景中的运动特征,替身像素在场景中运动并同其它汽车的替身进行交互,采用局部化的车辆模型提高运动汽车场景的逼真度,通过依据替身运动的平滑过渡算法完成归一化线性运动汽车图像静态视点的平滑过渡,解决了运动汽车图像的平滑过渡问题.实验结果说明,所提方法可确保运动汽车图像边缘锐化,有效处理平滑噪声和锐化边缘.     

多孔薄壁扁管连续挤压模的研制

介绍了连续挤压模的生产工艺过程 ,模具主要结构及设计参数 ,分析了生产中存在的问题以及采取的措施 ,充分发挥了连续挤压设备的潜力 ,扩大了产品品种     

Stabilizing switching design for switched linear systems: A state-feedback path-wise switching approach

This paper addresses the problem of switching stabilization for discrete-time switched linear systems. Based on the abstraction-aggregation methodology, we propose a state-feedback path-wise switching law, which is a state-feedback concatenation from a finite set of switching paths each defined over a finite time interval. We prove that the set of state-feedback path-wise switching laws is universal in the sense that any stabilizable switched linear system admits a stabilizing switching law in this set. We further develop a computational procedure to calculate a stabilizing switching law in the set.     

Stable local dimensionality reduction approaches

Dimensionality reduction is a big challenge in many areas. A large number of local approaches, stemming from statistics or geometry, have been developed. However, in practice these local approaches are often in lack of robustness, since in contrast to maximum variance unfolding (MVU), which explicitly unfolds the manifold, they merely characterize local geometry structure. Moreover, the eigenproblems that they encounter, are hard to solve. We propose a unified framework that explicitly unfolds the manifold and reformulate local approaches as the semi-definite programs instead of the above-mentioned eigenproblems. Three well-known algorithms, locally linear embedding (LLE), laplacian eigenmaps (LE) and local tangent space alignment (LTSA) are reinterpreted and improved within this framework. Several experiments are presented to demonstrate the potential of our framework and the improvements of these local algorithms.     

Application of fuzzy sets to manufacturing/distribution planning decisions in supply chains

In the real-world manufacturing/distribution planning decision (MDPD) integration problems in supply chains, the environmental coefficients and parameters are normally imprecise due to incomplete and/or unavailable information. This work presents a fuzzy linear programming approach based on the possibility theory. It applies this approach to solve multi-product and multi-time period MDPD problems with imprecise goals and forecast demand by considering the time value of money of related operating cost categories. The proposed approach attempts to minimize the total manufacturing and distribution costs by considering the levels of inventory, subcontracting and backordering, the available machine capacity and labor levels at each source, forecast demand and available warehouse space at each destination. This study utilizes an industrial case study to demonstrate the feasibility of applying the proposed approach to practical MDPD problems. The primary contribution of this paper is a fuzzy mathematical programming methodology for solving the MDPD integration problems in uncertain environments.     

传感器输出特性的线性化回归程序设计

介绍了用面向对象程序设计方法编制的线性回归数据处理程序 ,该程序用于传感器实验数据的回归处理和特性曲线的绘制