Applications and Technologies of All-Solid State Blue Laser

1 Introduction Along with the matureness of laser diode (LD) manufacturing technology, the performance of LD has been improved greatly since 1980s, so various kinds of laser devices based on LD have been developed rapidly, especially the all-solid state lasers. After early experiments and researches, the all-solid state lasers have been commercialized successfully.     

悠悠细雨中的前童

五月的江南，仍然沉浸在润物无声的季节里。     

Preparation of micro-patterned surfaces of Si-N-O films and their influence on adhesion behavior of endothelial cells

Microgrooves were prepared on Si(100) surface by photolithography and wet etching.Subsequently,Si-N-O films were deposited on the microgrooves by unbalanced magnetron sputtering(UBMS) and micro-patterned surfaces of Si-N-O films were obtained.The size of the micropatterns was measured by surface profilometer.The chemical composition of Si-N-O films were characterized by X-ray photoelectron spectrometry(XPS) and the wettability of the micropatterned surfaces was evaluated by contact angle measurement.The beh...     

基于粒子群优化BP神经网络的超声波缺陷位置预测

海洋设备的无损检测对于保障设备安全使用至关重要,由于设备所处的海洋环境特殊,要实现对海洋设备缺陷位置的准确估计难度较大.论文提出了一种基于粒子群优化BP神经网络(PSO-BP)预测设备缺陷位置的方法.通过模拟了海洋检测环境,用钢板作为实验对象,用超声波探伤仪对缺陷钢板进行了数据采集,获取了水下钢板的实时数据.通过粒子群算法对BP网络进行优化后对数据进行分析,对比缺陷出现的实际位置和预测位置,证明了粒子群优化的BP神经网络对于超声波检测的缺陷出现位置具有较好的预测效果.     

型钢混凝土框架桥受力特性的分析

目前框架桥结构主要是普通的钢筋混凝土框架结构,这种框架结构主要存在自重过大的问题,此问题导致顶进施工过程中土体的破坏和材料的浪费以及顶进施工难度的增加.本文提出用型钢混凝土结构代替框架桥中的普通钢筋混凝土结构,并用有限元软件Midas Civil对普通的钢筋混凝土框架桥和不同含钢率型钢混凝土框架桥进行了有限元的对比分析,对比两者在同等地质和荷载的条件下,所受内力和位移的情况.通过对比分析发现型钢混凝土框架桥结构是可行的,并得出了型钢混凝土框架桥含钢率的合理范围为5％～6％.     

A novel spherical-ordered macroporous CuO nanocatalyst for the electrochemical reduction of carbon dioxide

Journal of Applied Electrochemistry - The electrocatalytic reduction of CO2 is a promising research direction in resource utilization and sustainable energy development. However, there is still a...     

Electroless deposition of Ni on template of halloysite and its magnetic property

Halloysite template, a ceramic substrate, is of a hollow cylindric structure, on which the fine Pd nanoparticles are uniformly formed by the reduction of palldate chloride to initiate electroless deposition. The electroless deposition of Ni is catalyzed by the Pd particles, which results in a uniform layer of Ni-P alloy on halloysite. The alloy is of a nanocrystalline structure, of which the average diameter is about 6 nm. After being heat-treated at 400 ℃, it contains both Ni and Ni12P5 crystal, meanwhile, the Ni crystal gets larger with an average size of 51.9 nm.The content of phosphorous in the Ni layer has a great influence on crystal structure. The metallized halloysite has a higher inherent coercive force, and a much lower saturation magnetization in its as-plated state, while after heattreatment, the inherent coercive force decreases drastically. These magnetic properties have great relationship with the superparamagnetism of Ni nanocrystalline and the stress anisotropy in Ni layer.