Fluorine analysis of nuclear waste glasses

A method for analyzing the fluorine content of glass using a microwave oven to digest the glass is presented. Analysis time and secondary waste generation are reduced using this method, without sacrificing accuracy.     

Studies on microbridges of superconducting YBCO thin film

Critical current densities of the superconducting Y-Ba-Cu-O (YBCO) films have been observed to decrease with the increase of power of microwave radiation. Presence of Josephson type of junctions in the microbridges has been established from the microwave irradiation and magnetic field studies. BCS energy gap parameter (2/kT _c ) has been calculated from thedI/dV characteristics and found to be 3.7 at 13 K.     

微波渗硼机理研究

利用渗硼介质吸收微波的特性成功地实现了钢铁表面渗硼层的制备，并与常规渗硼进行了比较，结果表明：微波场下渗层生长的硼原子来源于介质分解的硼原子及气态硼化物。渗层生长与常规渗层生长一样表现〈002〉晶向取向生长特征，微波渗硼的渗层生长速率比常规快，除温度效应外，还与微波提高硼原子活性加速硼原子在渗层的扩散有关。     

The Metal-Dielectric Resonator Method of Measuring the Parameters of Radio Materials

The use of symmetrical H- and E-modes and asymmetrical E-modes in a longitudinally anisotropic dielectric cylinder with metal mirrors at the ends to measure its permittivity and dielectric loss tangent is considered. It is shown that the method has wider possibilities compared with the IEC-61338 recommendations. The results of a measurement of the dielectric parameters of a number of materials in the 2–78 GHz frequency band, including the permittivity tensor of sapphire, are presented. __________ Translated from Izmeritel'naya Tekhnika, No. 9, pp. 65–70, September, 2005.     

快速测定化学需氧量的方法

利用分光光度法、微波密封消解法测定水样中的化学需氧量，并把测定的精密度、准确度与国标回流法相比较，结果证明：分光光度法、微波消解法是测定化学需氧量的快捷方法，具有省时、省试剂、工作效率高的特点。     

铁尾矿为原料微波法制备介孔分子筛

以鞍山铁尾矿为硅源,CTAB为模板剂,采用微波辐照法合成出全硅介孔分子筛MCM-41。用N2低温吸附、FT-IR、XRD和TEM等表征手段考察了其比表面积、孔径分布、晶体形貌等特性。结果表明:微波辐射法合成的MCM-41分子筛诱导期极短,晶化速度很快,具有典型的按六方对称性排列的孔道结构,FT-IR证明了分子筛具有硅氧四面体骨架。     

圆柱谐振腔式MPCVD装置中氢、氩微波等离子体分布规律的数值模拟

在使用简化的等离子体放电模型的基础上,模拟了圆柱谐振腔式微波等离子体沉积室中,不同金刚石膜生长条件下微波等离子体的分布状态。在模拟中,针对纳米金刚石的生长环境,就纯氩气反应气体中,不同的输入功率、不同气体压力条件下,沉积室中形成的等离子体分布的变化规律进行了模拟,将其与一般氢气气氛下的相应模拟结果相对比。模拟所获得的结果,对微波等离子体方法沉积金刚石膜的操作环境的优化,有着一定的指导意义。     

Synthesis of acicular α-Bi2O3 microcrystals by microwave-assisted hydrothermal method

ABSTRACT

Materials based on bismuth(III) oxide are candidate to be used in optical and electronic devices because of their properties such as a variable band gap, photoconductivity, photoluminescence, high refractive index, and dielectric permittivity. These properties are dependent of several factors, e.g., present phases and crystal morphology. The microwave-assisted hydrothermal method (MAH) is a fast and efficient approach of synthesis to obtain semiconductor powders. However, the synthesis of monoclinic bismuth oxide (α-Bi₂O₃) with acicular morphology by MAH was not found in literature. In this paper, microcrystals of acicular α-Bi₂O₃ (monophasic) were successfully obtained by MAH using a synthesis temperature of 80°C for 0.5?h. X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron, and transmission electron microscopies showed the formation of a monoclinic structure (space group P21/c) with acicular morphology that grew along the [001] direction. The temperature and time necessary to synthetize acicular microcrystals were significantly lower than those found for acicular microcrystals obtained by conventional hydrothermal method.     

腔体形状对混响室内场均匀性的影响

针对高功率微波(HPM)激励下的混响室,研究了不同腔体形状对混响室内电场分布的影响。根据理想封闭矩形腔体内电磁场表达式,分析了腔体形状对混响室内场特性的重要影响,并确立以时间窗为研究单元的统计计算方法描述混响室内的瞬态场特征。重点研究腔体形状对腔体内场均匀性的影响效果,主要对比电场的最大值、分布标准差以及各向同性等指标。研究结果表明:在矩形谐振腔中引入复杂结构能够降低场分布标准差,提高能流分布的均衡性,实现均匀的电磁场环境。