Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

FEM analyses for influences of stress corrosion and pressure solution on THM coupling in dual-porosity rock mass

With the models of stress corrosion and pressure solution, by Yasuhara et al., two computation conditions were designed for a hypothetical nuclear waste repository in an unsaturated dual-porosity rock mass: (i) the fracture apertures are changed with the stress corrosion and pressure solution (the porosity of rock matrix is also a function of stress); (ii) the fracture apertures and the porosity of rock matrix are constants. Then the corresponding two-dimensional FEM analyses for the coupled thermohydro-mec...     

A Finite Element Simulation of the Electroplating Process

This paper describes the development, comparison and validation of both 2-D and 3-D models of the electroplating process in which the current density distribution, generated using the Finite Element Method (FEM), is used together with Faraday's law of electrolysis to determine the local plating depth. Prior to work on industrial components, a preliminary investigation was undertaken on the electroplating of a square copper cathode (work piece) with a parallel lead anode of identical shape. The results described here show good agreement, particularly in 3-D and are considered to validate the model sufficiently for it to be used for electroplating tooling design.     

Modelling of Material Side Flow in Hard Turning

In this paper an attempt has been made to model the material side flow generated during hard turning operation. A three dimensional thermo elasto-viscoplastic finite element model is presented. The model incorporates cutting tools with different nose radii and cutting conditions. The model was also used to investigate the effect of different process parameters on the extent of material side flow. The predicted results revealed that more side flow is generated when higher nose radius is used. A similar observation is noted when lower feed is used. The simulated results agreed well with the experimentally examined machined surface, viewed with a scanning electron microscope.     

Influencing factors on elastic-plastic deformation of multi-layered surfaces under sliding contact

Stress distribution in the gradient multi-layered surface under a sliding contact was investigated using finite element method(FEM). The main structure parameters of layered surface discussed are total layer thickness,layer number and elastic modulus ratio of layer to the substrate. A model of multi-layered surface contact with rough slider was studied. The effect of the surface structure parameters on the elastic-plastic deformation was analyzed.     

一个基于CORBA和Java技术的分布式并行有限元计算环境

该文结合ＣＯＲＢＡ（Ｃｏｍｍｏｎ Ｏｂｊｅｃｔ Ｂｒｏｋｅｒ Ａｒｃｈｉｔｅｃｔｕｒｅ）和Ｊａｖａ技术,提出了一个能在支持ＴＣＰ／ＩＰ协议的异构网络环境下实现分布式有限元计算环境的具体方案,为了验证方案的可行性,在西南交通大学应用力学与工程系计算中心的局域网上实现了分布式并行计算环境的基本框架,并进行了１０００阶矩阵相乘的计算。     

钢包用滑板的热应力有限元分析

连铸钢包使用的滑动激光器是控制连铸生产过程的关键设备之一。为了确定501滑板使用中产生裂纹的原因，抑制裂纹形成，提高滑板使用寿命，本文应用有限元法进行了滑板热应力分析，并与生产中使用的滑板比较，有限元分析显示：在滑板材质一定的情况下，滑板形状以及滑板的预紧能力和固定方式是影响滑板使用寿命的基本因素。     

Analysis of a Gyroscope＇s Rotor Nonlinear Supported Magnetic Field Based on the B-Spline Wavelet-FEM

A supported framework of a gyroscope＇s rotor is designed and the B-Spline wavelet finite element model of nonlinear supported magnetic field is worked out. A new finite element space is studied in which the scaling function of the B-spline wavelet is considered as the shape function of a tetrahedton. The magnetic field is spited by an artificial absorbing body which used the condition of field radiating, so the solution is unique. The resolution is improved via the varying gradient of the B-spline function under the condition of unchanging gridding. So there are some advantages in dealing with the focus flux and a high varying gradient result from a nonlinear magnetic field. The result is more practical. Plots of flux and in the space is studied via simulating the supported system model. The results of the study are useful in the research of the supported magnetic system for the gyroscope rotor.     

高速锯床防护罩抗冲击能力的有限元分析

利用ANSYS/LS_DYNA的动力学分析功能对GS3050型超高速数控锯床安全防护罩的抗冲击能力进行了数值分析,对刀具碎片侵彻有机玻璃的过程进行了数值模拟.结果表明,采用厚度为15 mm的改性丙烯酸脂有机玻璃作为GS3050锯床的安全防护罩是可靠的.数值分析和试验的结果吻合.     

基于剪切平面与磨损平面的磨削淬硬热量分配比研究

磨削淬硬技术利用磨削热对工件表层进行表面热处理,磨削热和工件温度场分布均是影响磨削淬硬技术的关键因素,本文基于单颗磨粒对热源产生位置进行了分析,忽略在磨粒与磨屑界面产生的热量,考虑磨屑-工件界面和磨粒-工件界面热源,建立了磨削淬硬热量分配比模型,并利用有限元分析和实验的方法对建立的热量分配比模型进行了验证.