Neutron Stress Measurement of W‐Fiber Reinforced Cu Composite

Stress measurement methods using neutron and X‐ray diffraction were examined by comparing the surface stresses with internal stresses in the continuous tungsten‐fiber reinforced copper‐matrix composite. Surface stresses were measured by X‐ray stress measurement with the sin²ψ method. Furthermore, the sin²ψ method and the most common triaxal measurement method using Hooke's equation were employed for internal stress measurement by neutron diffraction. On the other hand, microstress distributions developed by the difference in the thermal expansion coefficients between these two phases were calculated by FEM. The weighted average strains and stresses were compared with the experimental results. The FEM results agreed with the experimental results qualitatively and confirmed the importance of the triaxial stress analysis in the neutron stress measurement.     

On the design of multiple key hashing files for concurrent orthogonal range retrieval between two disks

This paper concerns the following problem: given a set of multi-attribute records, a fixed number of buckets and a two-disk system, arrange the records into the buckets and then store the buckets between the disks in such a way that, over all possible orthogonal range queries (ORQs), the disk access concurrency is maximized. We shall adopt the multiple key hashing (MKH) method for arranging records into buckets and use the disk modulo (DM) allocation method for storing buckets onto disks. Since the DM allocation method has been shown to be superior to any other allocation methods for allocating an MKH file onto a two-disk system for answering ORQs, the real issue is knowing how to determine an optimal way for organizing the records into buckets based upon the MKH concept.

A performance formula that can be used to evaluate the average response time, over all possible ORQs, of an MKH file in a two-disk system using the DM allocation method is first presented. Based upon this formula, it is shown that our design problem is related to a notoriously difficult problem, namely the Prime Number Problem. Then a performance lower bound and an efficient algorithm for designing optimal MKH files in certain cases are presented. It is pointed out that in some cases the optimal MKH file for ORQs in a two-disk system using the DM allocation method is identical to the optimal MKH file for ORQs in a single-disk system and the optimal average response time in a two-disk system is slightly greater than one half of that in a single-disk system.     

Application of the blind source separation method to feature extraction of machine sound signals

As the result of vibration emission in air, a machine sound signal carries important information about the working condition of machinery. But in practice, the sound signal is typically received with a very low signal-to-noise ratio. To obtain features of the original sound signal, uncorrelated sound signals must be removed and the wavelet coefficients related to fault condition must be retrieved. In this paper, the blind source separation technique is used to recover the wavelet coefficients of a monitored source from complex observed signals. Since in the proposed blind source separation (BSS) algorithms it is generally assumed that the number of sources is known, the Gerschgorin disk estimator method is introduced to determine the number of sound sources before applying the BSS method. This method can estimate the number of sound sources under non-Gaussian and non-white noise conditions. Then, the partial singular value analysis method is used to select these significant observations for BSS analysis. This method ensures that signals are separated with the smallest distortion. Afterwards, the time-frequency separation algorithm, converted to a suitable BSS algorithm for the separation of a non-stationary signal, is introduced. The transfer channel between observations and sources and the wavelet coefficients of the source signals can be blindly identified via this algorithm. The reconstructed wavelet coefficients can be used for diagnosis. Finally, the separation results obtained from the observed signals recorded in a semi-anechoic chamber demonstrate the effectiveness of the presented methods .     

《中德四季晨昏杂咏》（之八）的译文鉴赏

在诗歌翻译中,译文会因为译者的不同在风格上表现出差异.然而,译文的质量不外乎经受形美、音美和意美的考量.译者应从本国读者的文化背景上结合时代的脉搏来进行“再创造”,做到形式、音律和意蕴的完美统一.歌德的诗歌《中德四季晨昏杂咏》（之八）的四种中文译本各有特色,均在不同程度上实现了“三美”的融合.     

Sampling average approximation method for a class of stochastic Nash equilibrium problems

We consider a class of stochastic Nash equilibrium problems (SNEP). Under some mild conditions, we reformulate the SNEP as a stochastic mixed complementarity problem (SMCP). We apply the well-known sample average approximation (SAA) method to solve the SMCP. We further introduce a semismooth Newton method to solve the SAA problems. The comprehensive convergence analysis is given as well. In addition, we demonstrate the proposed approach on a stochastic Nash equilibrium model in the wholesale gas–oil markets.     

模糊综合评价法在长江下游贵池河段水质评价中的应用

对水质评价存在诸多方法,而模糊综合评价法具有评价结果合理、更接近客观实际等优点,因而得到越来越广泛的应用。通过模糊评价方法对长江下游贵池河段2005～2009年间水环境综合评价,并采用加权平均原则求取隶属等级,取得较好的效果。     

时空结构视野下旅游客源市场定量初探——以浙江嘉兴乌镇为例

在客源时间分布上,计算乌镇游客游览时间强度指数,得到游客游览时间主要集中在二、三季度,并以7、8月份为最高峰。而在客源市场的分布上,鸟镇已经形成了以浙江为核心,上海、北京等地为一级,安徽、河南等地为二级的国内客源市场。在长三角古村落旅游发展迅速的今天,乌镇与周边的周庄、同里等古镇的竞争日益激烈,而旅游产品的创新、加大宣传迅速占领国内二级客源市场等措施将有助于乌镇在竞争中脱颖而出,占领主导地位。     

CMC在珠光颜料涂布纸中的应用试验

对添加羧甲基纤维素钠改善水性珠光涂布纸云母系列珠光涂料的性质做了初步研究．试验结果表明，羧甲基纤维素钠不仅能改善涂料的稳定性，提高涂层的表面拉毛强度，还能起到辅助胶粘剂的作用．通过优化试验得到了较理想的羧甲基纤维素钠配比．     

Obtaining mode mixity for a bimaterial interface crack using the virtual crack closure technique

We review, unify and extend work pertaining to evaluating mode mixity of interfacial fracture utilizing the virtual crack closure technique (VCCT). From the VCCT, components of the strain energy release rate (SERR) are obtained using the forces and displacements near the crack tip corresponding to the opening and sliding contributions. Unfortunately, these components depend on the crack extension size, Δ, used in the VCCT. It follows that a mode mixity based upon these components also will depend on the crack extension size. However, the components of the strain energy release rate can be used for determining the complex stress intensity factors (SIFs) and the associated mode mixity. In this study, we show that several—seemingly different—suggested methods presented in the literature used to obtain mode mixity based on the stress intensity factors are indeed identical. We also present an alternative, simpler quadratic equation to this end. Moreover, a Δ-independent strain energy release based mode mixity can be defined by introducing a “normalizing length parameter.” We show that when the reference length (used for the SIF-based mode mixity) and the normalizing length (used for Δ-independent SERR-based mode mixity) are equal, the two mode mixities are only shifted by a phase angle, depending on the bimaterial parameter ε.     

FEM for evaluation of weight functions for SIF, COD and higher-order coefficients with application to a typical wedge splitting specimen

In the evaluation of accurate weight functions for the coefficients of first few terms of the linear elastic crack tip fields and the crack opening displacement (COD) using the finite element method (FEM), singularities at the crack tip and the loading point need to be properly considered. The crack tip singularity can be well captured by a hybrid crack element (HCE), which directly predicts accurate coefficients of first few terms of the linear elastic crack tip fields. A penalty function technique is introduced to handle the point load. With the use of these methods numerical results of a typical wedge splitting (WS) specimen subjected to wedge forces at arbitrary locations on the crack faces are obtained. With the help of appropriate interpolation techniques, these results can be used as weight functions. The range of validity of the so-called Paris equation, which is widely used in the evaluation of the COD from the stress intensity factors (SIFs), is established.