An automatic torque ripple compensation system for direct drive motors

A serious problem in motion control is the occurrence of torque ripple. Since a direct drive (DD) motor with a magnet rotor uses a rare-earth magnet, the torque ripple is more serious than that of conventional servomotors. This paper presents an auto-compensation of torque ripple using a software-implemented torque observer. The frequency and amplitude of torque ripple can be obtained in the controller by using the estimated torque from an observer, and the autonomous generation of a compensating current component for a torque ripple is possible. The proposed algorithm has been verified by experiments.     

Steady-state torque control system with secondary-current feedback for three-phase squirrel-cage induction motors

This paper presents a highly stable steady-state torque control system with a feedback of a secondary current signal. The torque control system is constructed with a feedback of the secondary current (I₂) signal using a quick response magnetic-field sensor constructed with an amorphous core multivibrator bridge, which can solve the secondary resistance change problem for temperature variation in the IM. Moreover, we added a state feedback to the system to improve the response speed for the unit step function of a torque order. The I₂ sensor method has advantages especially at a low-speed range, in which conventional method using an integrator shows control errors.     

一种可用于可调谐环行Ti：Al_2O_3激光器的宽带单向器

本文介绍一种宽带单向器的原理及设计。选用ＴＧＧ作磁旋光介质，旋光石英晶片作补偿片，所设计的色散补偿型宽带单向器预计可在７００～１０００ｎｍ波长范围内实现环行激光腔中的单向行波运行；将其应用在可调谐环行Ｔｉ：Ａｌ２Ｏ３激光器中，获得了良好的实验结果。     

Electrolytic regeneration of bleach solution in the motion picture industry

Cyclic voltammetric and galvanostatic experiments have been carried out with both synthetic and commercial bleach solutions with a view to regenerating the same. Maximum efficiency could be achieved if the oxidation is carried out below an anodic potential of 0·80 V vs SCE. The data obtained in galvanostatic experiments with RCE confirm the results of the earlier technique.     

An analysis,design and tuning of Cascade Control Systems in the presence of constraints in actuator and process outputs

In the presence of rate constraints in actuator, design of cascade controller based on the primary controller conditional integration can result into closed-loop system oscillations. Stability analysis, performed by the describing function technique and confirmed by simulation, demonstrates that the solution based on the Anti-Reset Windup Cascade Control System (ARW CCS) structure is successful. Design and tuning of the ARW CCS secondary controller is a standard ARW single-input single-output problem. In the present paper tuning is proposed for the ARW CCS primary controller. For the serial process modeling simple rules are derived and confirmed by experimental results, obtained on a drum type boiler of a 210 MWe lignite coal fired unit. General design of the ARW CCS is based on the parallel process modeling and optimization of the primary controller. Optimization is performed in the frequency domain, under constraints on the maximum sensitivity, multiplicative uncertainty bound and sensitivity to measurement noise. Simulation and experimental results on a laboratory thermal plant demonstrate effectiveness of the proposed optimization.     

Stochastic differential equations driven by a Wiener process and fractional Brownian motion: Convergence in Besov space with respect to a parameter

A stochastic differential equation involving both a Wiener process and fractional Brownian motion, with nonhomogeneous coefficients and random initial condition, is considered. The coefficients and initial condition depend on a parameter. The assumptions on the coefficients and the initial condition supplying continuous dependence of the solution on a parameter, with respect to the Besov space norm, are established.     

A general formulation of monotonically convergent algorithms in the control of quantum dynamics beyond the linear dipole interaction

This paper presents a general method to formulate monotonically convergent algorithms for identifying optimal control fields to manipulate quantum dynamics phenomena beyond the linear dipole interaction. The method, facilitated by a field-dependent dipole moment operator, is based on an integral equation of the first kind arising from the Heisenberg equation of motion for tracking a time-dependent, dynamical invariant observable associated with a reference control field.     

ON THE PARTIAL SUMS OF RESIDUALS IN AUTOREGRESSIVE AND MOVING AVERAGE MODELS

Abstract. The limiting process of partial sums of residuals in stationary and invertible autoregressive moving-average models is studied. It is shown that the partial sums converge to a standard Brownian motion under the assumptions that estimators of unknown parameters are root- n consistent and that innovations are independent and identically distributed random variables with zero mean and finite variance or, more generally, are martingale differences with moment restrictions specified in Theorem 1. Applications for goodness-of-fit and change-point problems are considered. The use of residuals for constructing nonparametric density estimation is discussed.     

Kinematic analysis of 3SPS+1PS bionic parallel test platform for hip joint simulator based on unit quaternion

As a novel parallel hip joint simulator, the 3SPS+1PS bionic parallel test platform with 4 degrees of freedom including three rotations and one translation is proposed. SPS denotes the spherical-prismatic-spherical leg and PS denotes the prismatic-spherical leg where only the prismatic joint is actuated and hence underlined. By means of the unit quaternion method, the formulae for solving the inverse/forward displacement, the inverse/forward velocity and the inverse/forward acceleration kinematics are derived. Using the unit quaternion to represent the position and orientation of a moving platform, singularities caused by Euler angles can be avoided. Combining the topological structure characteristics of the 3SPS+1PS bionic parallel test platform and letting the three-dimensional (3-D) motion of a human hip joint as its output movement, the displacement trajectories of three active legs are constructed based on the inverse displacement kinematics. The forward kinematic tests whose data are recorded by a 3-D orientation capture system are carried out on the developed parallel hip joint simulator. Moreover, the results of the forward kinematic tests prove that the 3SPS+1PS bionic parallel test platform can approximately represent human hip joint motion and provide more reliable experimental data for hip joint prostheses in clinical application.