Determination of the width of the transition layer between the crystalline and amorphous zones in nylon 1010 by SAXS

The width of the transition layer between the crystalline and amorphous zones in nylon 1010 was determined by SAXS with point collimation and long-slit collimation, respectively. The width of the transition layer, E, was found to be 1.7 nm. The results show that the width of the transition layer is independent of crystallinity.     

Radiation transmission through a composite pure water layer of uniform and depth-dependent extinction characteristics

The paper describes the calculation of the beam solar radiation transmission across the uniform salinity upper convecting zone (UCZ) and the salinity stratified gradient zone (GZ), when the extinction coefficient is not only wavelength but also salinity-concentration dependent, assuming that the effect of scattering to be negligible. The results are useful in determining the effects of dissolved salt ions on pure water transmission, at least according to the existing measured data in the literature.     

Homogenization of hardness distribution and distortion in high pressure gas quenching

Quenching with gases rather than oil or other liquid media has the advantages of reducing the risks concerning health and environment, while simultaneously homogenizing the quenching results and minimizing distortion due to a wide range of possible process parameter variations and the pure convective heat transfer. In this contribution, a coupled solution for increasing homogenization of quenching results within high pressure gas quenching will be presented. In the first stage, an experimental test facility was set up for flow investigations and in the second stage a numerical simulation model was generated. The numerical and experimental results of the flow through the chamber were compared for several boundary conditions. Finally, after complete verification of the simulation, the model may be used to assist in parameter variation for optimization of homogeneous high pressure gas quenching.     

MATHEMATICAL MODELING OF THROUGH-HOLE-PLATING IN ELECTROCHEMICAL MICROFABRICATION II. AXISYMMETRIC TWO-DIMENSIONAL CONVECTIVE MASS TRANSFER

Axisymmetrical, two dimensional mass transfer in a tube and a through-hole was studied. The elliptic convective-diffusion equation was solved numerically by taking into account both the axial and radial diffusion in the entrance region of an infinite tube. The whole mass-transfer region in a tube of finite length was also studied by dividing the domain into several regions according to different mass-transfer mechanisms. A similar analysis is then conducted for a through-hole geometry by assuming a modified Hagen-Poiseuille fluid pattern. Results show that mass-transfer rate in a through-hole is larger than that in a tube by approximately 10%. This is due primarily to faster fluid flow within the concentration boundary layer in a through-hole.     

铝—钢双金属复合轧制层厚比及轧制力的研究

用实验方法研究了铝－钢双金属复合轧制时层厚比的变化规律。给出了双金属复合时轧制力的计算式。     

RAZUMIKHIN-TYPE THEOREMS OF NEUTRAL STOCHASTIC FUNCTIONAL DIFFERENTIAL EQUATIONS

The stability of stochastic functional differential equation with Markovian switching was studied by several authors,but there was almost no work on the stability of the neutral stochastic functional differential equations with Markovian switching.The aim of this article is to close this gap.The authors establish Razumikhin-type theorem of the neutral stochastic functional differential equations with Markovian switching,and those without Markovian switching.     

在ASP.NET 2.0中自动化构建数据访问层

使用ASP.NET2.0所提供的BuildProvider类,将自动化构建的数据访问层源代码编译到程序集中,使得开发者利用Ob-jectDataSource控件,可以简单、快速地实现三层架构的Web应用。     

Comparison of the RF MEMS switches with dielectric layers on the bridge’s lower surface and on the transmission line

Previously, we proposed that the dielectric layer of RF MEMS switch can be fabricated either on the transmission line, as traditional switches, or on the lower surface of the bridge. This paper presents a detailed comparison of the RF MEMS switches with different positions of dielectric layer. Through theoretically analyzing the physical model of fringing capacitance, it is revealed that different positions of dielectric layer can result in different switch capacitances. Therefore, the change of d...     

Free and forced convection boundary layer flow through a porous medium with large suction

An analytical study is made of the free and forced convection boundary layer flow past a porous medium bounded by a semi-infinite vertical porous plate. Locally similar solutions are then obtained by a perturbation method for large suction. Solutions for the velocity and temperature distributions are shown graphically for various suction velocities and values of the driving parameter G_r/R, where G_r is the Grashof number and R_e is the Reynolds number. The corresponding values of the skin friction coefficient and the Nusselt number are finally shown in tabular form.     

U.v. absorbers in sun cosmetics 1978

A comprehensive survey has been carried out to establish which sun-screen agents are used by the cosmetics industry in Holland. During 1978, some 200 cosmetic sun preparations, composed of forty-eight brands, were purchased and analysed to determine which u.v. absorbing compounds were present. Most of those found were identified and quantified by means of thin layer chromatography and u.v. spectrometry. A basis for this work was the proposal by the European Cosmetic Manufacturers to produce a positive list of u.v. absorbers. It was felt that by carrying out this survey, some priority could be placed on the most popular materials used by the industry. When comparing those found with the European list of u.v. absorbers 1978, only twenty-four of the sixty compounds listed could be identified in the samples. The six most frequently used were found to be:

• 1 2-Ethylhexyl.p.methoxycinnamate (nineteen brands).
• 2 2-Phenylbenzimidazole.5-sulphonic acid (eleven brands).
• 3 2-Ethoxyethyl.p.methoxycinnamate (nine brands).
• 4 3 (4′Methylbenzylidene)D,D,L-camphor (seven brands).
• 5 3-Benzylidene.D,L-camphor (six brands).
• 6 2-Hydroxy.4-methoxy.benzophenone (six brands).

Usage levels varied from 0.4% up to 6.8%. Twenty-two products used a combination of two, and four products a combination of three sun-screens. Les filtres u.v. dans les produits anti-solaires 1978