Paste Residence Time in a Spouted Bed Dryer. II: Effect of Spout Operational Conditions

Residence time distributions for an aqueous solution of 10% sodium chloride in a spouted bed dryer of inert particles were determined using the stimulus-response technique. Glass and polyethylene beads with diameters 2.6 and 3.4 mm were used as inert bodies in a cylindrical column of 14.0 cm diameter and 60° conical base. The effects of inert bodies load, air, and paste flow rates on the mean residence times and RTD were determined following 2³ factorial designs. The RTD could be correlated to the perfect mixing cell model with R² varying from 0.8684 to 0.9815. The mean residence times in CSBD varied from 10.8 to 13.9 and 10.7 to 13.3 min for glass and polyethylene beads, respectively. For both inert particles, mean residence times increased with bed height and decreased with paste feed rates. Also, terms of interaction among the factors were significant in some cases, showing a complex behavior of paste residence times. Equations obtained by response surface regression could predict mean residence times on glass and polyethylene beads with deviations lower than ±10%.     

Influence of process variables on the drying of potato slices

Investigation of the effects of varying air velocity, slice thickness, and pre-treatment with sodium chloride solutions and surface active agents on drying potato slices indicated that the drying occurred entirely in the falling rate period and was controlled by the mechanism of liquid diffusion. The rate of drying, and therefore the diffusion coefficients, increased with the addition of sodium chloride and surface active agents. Diffusion coefficients were also influenced by air velocity and slice thickness, suggesting that the rate of drying of potato slices is controlled by a combination of internal and external resistances.     

The weight vector theory of Coriolis mass flowmeters

In this paper a fuller and clear derivation of the weight vector theory of Coriolis mass flowmeters is given indicating its potential for the prediction of velocity profile effects in both the traditional kind of meter (vibrating tube) and the compact kind (vibrating element inside a duct).     

Ultrasonic study of molecular association of poly(vinyl chloride) solution in tetrahydrofuran

Ultrasonic absorption, velocity, adiabatic compressibility, relaxation time and relaxation amplitude measurements are reported on poly(vinyl chloride) (PVC) solution in tetrahydrofuran (THF) using pulsed ultrasonic apparatus operating at 2 MHz and 313 K. Results show a linear increase of velocity. density, viscosity, absorption coefficient, relaxation time and relaxation amplitude values with the increase of PVC concentration in THF. In contrast the compressibility decreases with increasing PVC concentration. This suggests interaction between PVC and THF molecules.     

Voidage characteristics and prediction of bed expansion in liquid-solid inverse fluidized bed

Studies on voidage fluctuations, axial voidage profile and bed expansion are carried out by measuring the local void fraction using particles of wide ranging characteristics in liquid-solid inverse fluidized bed. The quality of fluidization is elucidated by the local voidage fluctuations. The RMS voidage fluctuation depicts a maximum with respect to average bed void fraction and increases with increase in Archimedes number. The fluidization quality has been quantified using average normalized RMS voidage fluctuation in terms of Transition number. The axial void fraction is almost uniform throughout the bed except for particles with size distribution. All the literature and present experimental data on bed expansion are unified in terms of Richardson and Zaki equation using experimental terminal velocities. A new correlation is proposed for predicting the wall effect corrected experimental terminal velocities, as a substitute for standard drag equation. The bed expansion data are also predicted using the drift flux model.     

Propagation of the Chain Explosive‐Decomposition Reaction in Silver Azide Crystals

The velocity of the chain explosivedecomposition reaction in silver azide whiskes has been measured (1500 m/sec). The measured velocity is identified as the propagation velocity of the diffusion front of holes generated in the course of explosive decomposition.     

基于超声传感技术在污水旋流池测量中的应用

为了能够准确地测量污水旋流池的液面高度,设计了基于超声传感技术的污水旋流池液面测量方法,通过长时间的运行,测量数据完全满足污水旋流池的生产工艺要求。     

Tactical combat movements: inter-individual variation in performance due to the effects of load carriage

An examination into the effects of carried military equipment on the performance of two tactical combat movement simulations was conducted. Nineteen Airfield Defence Guards performed a break contact (five 30-m sprints) and a fire and movement simulation (16 6-m bounds) in five load conditions (10–30 kg). Heavier loads significantly increased movement duration on the break contact (0.8%/kg load) and fire and movement (1.1%/kg). Performance deterioration was observed from the beginning to the end of the series of movements (bounds or sprints) with deterioration becoming significantly greater in heavier load conditions. Inter-individual variation between slower and faster participants showed a range in load effects; 0.6, 0.8%/kg for fast and 1.0, 1.4%/kg for slow (break contact, fire and movement, respectively). Velocity profiles revealed that the initial acceleration and peak velocity were the primary determinants of performance. As the duration of these tactical combat movements reflects periods of heightened vulnerability, these findings highlight important implications for commanders.

Practitioner Summary: Increasing amounts of carried military equipment impairs the performance of tactical combat movements. Examination of inter-individual variation in velocity profiles identified that the initial acceleration and the peak velocity achieved during sprints and bounds are key determinants of overall performance.     

喷射沉积柱坯的生长模型

根据现有喷射沉积设备的喷射几何关系推导了柱状沉积坯生长的数学模型,并利用该模型对沉积器的临界下降速度进行了初步估算。     

宇宙主胁量限定粒子质量、微观临界尺寸和真空光速（胁量力学初导IV）

扩展到任意质量体的宇宙主胁量描述。宇宙主胁量同质量之间只差一个常量系数。宇宙主胁量创造了粒子的质量，造就了粒子的微观临界尺寸，构筑了恒定而有限的真空光速。