On the permeation rate of copper extraction through liquid membranes

The understanding of the permeation rate of metal ions through liquid membranes is important for the design of such systems. In this paper, the permeation rates of copper ions through liquid surfactant membranes, including interfacial reaction rates and the diffusion rate of the copper ion, were analyzed using a model based on a mobilized hollow spherical globule configuration. The analysis shows that the extracting reaction is dominant at the external interface of the membrane and the stripping reaction is dominant at the internal interface; this means the reactions at both interfaces are not in equilibrium during the course of extraction. It also shows that the extraction rate, the diffusion rate and the stripping rate are not of equal value, especially at the early stage of the run.     

我国金属阳极隔膜法烧碱发展现状与对策

详细介绍了我国氯碱工业采用金属阳极隔膜法制烧碱的现状及与世界先进水平的差距。提出了包括大力进行以节能为重点的技术改造；调整烧碱产品规格；彻底淘汰和转换石墨阳极隔膜法；推广先进的扩张金属阳极隔膜电解技术以及结合我国国情有计划地发展离子膜法制烧碱技术等改造措施及预期效果。     

非金属电镀用导电漆的研制

介绍了导电漆、作为导电填料的片状镀银铜粉的制备工艺流程。分别研究了漆膜表面单位电阻与镀银铜粉的含量及其粒径以及钛酸酯偶联剂的含量之间的关系。结果表明,当镀银铜粉的粒径为400目、质量分数在57%~65%之间,钛酸酯偶联剂的质量分数为10%时,所得涂膜的导电性能最佳。加入含C-18的油酸可以使导电漆长期贮存而电阻值不变。经检测,所得涂膜具有良好的性能:附着力1级,硬度1 H,柔韧性1 mm,冲击强度50 kg/cm2,膜厚10~15μm,漆膜表面每厘米电阻0.15Ω,每分米电阻0.47Ω。指出了导电漆应用过程中的注意事项。     

Reserve estimation of an open pit mine under price uncertainty by real option approach

Reserve estimation is a key to find the correct NPV in a mining project. The most important factor in reserve estimation is the metal price. Metal price fluctuations in recent years were exaggerated, and imposed a high degree of uncertainty to the re-serve estimation, and in consequence to the whole mine planning procedure. Real option approach is an efficient method of deci-sion making in the uncertain conditions. This approach has been used for evaluation of defined natural resources projects until now. This study considering the metal price uncertainty used real option approach to prepare a methodology for reserve estimation in open pit mines. This study was done on a copper cylindrical deposit, but the achieved methodology can be adjusted for all kinds of deposits. This methodology was comprehensively described through the examples in such a manner that can be used by the mine planners.     

从国际铜加工行业的重组看我国铜加工行业的可持续发展

介绍了近年来国际铜加工行业的资产重组以及我国铜加工行业的特点,对正处于调整期的我国铜加工行业的可持续发展提出了一些建议。     

热交换器材料优化研究

对内螺纹铜管尺寸优化、铝箔厚度减薄前后的空调热交换器进行了单体性能实验和整机性能实验对比。实验结果表明优化后的内螺纹铜管、铝箔完全满足使用要求，为节约空调热交换器材料提供了有力的依据。     

Stresses in bent copper tubing: Application to fatigue and stress-corrosion cracking failure mechanisms

The residual and applied stresses in u-bent copper tubing are addressed in the context of both cyclic fatigue and stress-corrosion cracking. Failures as a result of fatigue and stress corrosion cracking in u-bent copper tubing have been observed to initiate at nonintuitive locations when only the applied stresses on the component are considered. This paper presents both qualitative classical and quantitative finite-element stress analysis results for the forming of u-bends. The resulting residual stress distributions are compared to fracture patterns generated by both fatigue and stress-corrosion cracking mechanisms.     

Numerical Modeling of Grain Boundary Effects in the Diffusional Creep of Copper Interconnect Lines

We propose a numerical simulation technique to model the process of diffusional creep and stress relaxation that occurs in Cu-damascene interconnects of integrated circuit devices in processing stage. The mass flow problem is coupled to the stress analysis through vacancy flux and equilibrium vacancy concentration. The technique is implemented in a software package that seamlessly integrates the problem-oriented code with commercially available finite element program MSC.Marc. It is utilized to model the Coble creep phenomenon by introducing the nanoscale grain boundary region having the thickness on the order of several layers of atoms. As an illustration, the two-dimensional problem of stress relaxation in a single grain subjected to prescribed displacements and tractions is examined.     

ISA法铜电解槽槽面水平误差的控制

本文介绍了通过采用找平装置来控制ISA法铜电解槽槽面水平误差的方法,通过现场测量及工艺操作证明是行之有效的。     

利用铜尾矿烧制水泥熟料的技术研究

利用给定铜尾矿在系统分析的基础上,掺加其它一些原料,在实验室烧制高标号水泥熟料。