A concise process technology for 3-D suspended radio frequency micro-inductors on silicon substrate

In this letter, a concise process technology is proposed for the first time to enable the fabrication of good quality three-dimensional (3-D) suspended radio frequency (RF) micro-inductors on bulk silicon, without utilizing the lithography process on sidewall and trench-bottom patterning. Samples were fabricated to demonstrate the applicability of the proposed process technology.     

Self-aligned offset gated poly-Si TFTs with a floating sub-gate

We have fabricated a self-aligned offset-gated poly-Si thin film transistor (TFT) by employing a novel photoresist reflow process. The gate structure of the new device is consisted of two unique patterns: A main-gate and a sub-gate. The new fabrication method extends the gate-oxide over the offset region. With the assistance of the sub-gate and reflowed photoresist a self-aligned offset region is successfully obtained due to the offset oxide acting as an implantation mask. The poly-Si TFT with symmetrical offsets is easily fabricated and the new method does not require any additional offset mask step. Compared with the misaligned offset gated poly-Si TFTs, excellent symmetric electrical characteristics are obtained     

An important factor affecting synergism on coprocessing of Taiheiyo coal with Athabasca oil sand bitumen

A series of mixtures of Japanese subbituminous Taiheiyo coal and Athabasca oil sand bitumen (AOB) with various coal concentrations (0–100 wt%) was coprocessed in a 70 ml autoclave at 420°C for 1 h in the presence of H₂ (50 kg/cm² at room temperature) and sulfided Ni---Mo/Al₂O₂ catalyst. The mixture containing 2 wt% coal produced the largest amount of hexane soluble fraction (HS) and the smallest amount of benzene insoluble fraction (BI). Thus, a synergistic liquid production occurred for this mixture with 2 wt% coal by suppressing the retrogressive reactions which proceeded for pure AOB. The HS obtained from mixtures with 2–30 wt% showed higher H/C ratios and lower heteroatom contents than those obtained from pure AOB and the mixtures with more than 30 wt% coal. The amounts of transferable hydrogen contained in the mixtures were estimated using anthracene as a hydrogen acceptor. The mixtures with 2–10 wt% coal contained higher amounts of donor hydrogen than pure AOB. The HS yield from the various mixtures was correlated with the amount of donor hydrogens contained in the mixtures, except for the mixture with 10 wt% coal. Thus, the important factor which results in synergism is suggested to be the amount of donor hydrogens contained in the feed mixtures.     

Oxidation of methane to formaldehyde over Fe/SiO2 and Sn---W mixed oxides

In an attempt to develop new catalysts for the formation of formaldehyde from methane, the promotion effect of Fe on SiO₂ and that of Sn on WO₃ have been studied. The formation of formaldehyde on silica can be appreciably enhanced by the impregnation of Fe, as far as iron loadings are kept below 0.1 atom.% (Fe/Si × 100). In the case of Sn---W---Ox catalysts, both the addition of Sn to WO₃, and that of W on SnO₂ were effective to the selective formaldehyde formation. Absorption spectra (UV-Vis) and ESR measurements revealed that tetrahedrally coordinated Fe³⁺ in the silica network plays an important role in the formation of formaldehyde. A thin surface layer consisting of W and Sn oxides can account for the selective formaldehyde formation on the Sn---W---Ox catalysts.     

A recurrent neural network for solving a class of general variational inequalities.

This paper presents a recurrent neural-network model for solving a special class of general variational inequalities (GVIs), which includes classical VIs as special cases. It is proved that the proposed neural network (NN) for solving this class of GVIs can be globally convergent, globally asymptotically stable, and globally exponentially stable under different conditions. The proposed NN can be viewed as a modified version of the general projection NN existing in the literature. Several numerical examples are provided to demonstrate the effectiveness and performance of the proposed NN.     

Rapid calculation of the periodic steady state for electronicallyswitched, time varying power system loads

The periodic steady state of power distribution system loads is studied for electronically switched, time varying cases. Many loads of this type appear on contemporary power systems as energy saving and controllable demands. Several alternative methods of calculating the periodic steady state are discussed and a new method is proposed based on the frequency modulation property of the discrete Fourier transform. The new method is termed the gain-shift formula (GSF) because the format of the technique entails adding frequency shifted terms which represent the parameter to be calculated. An example of a triac-switched load on the distribution system is given. The main advantages of the GSF are: rapid calculation of the periodic steady state; and efficient calculation of the frequency spectrum of voltages and currents in the periodic steady state     

Laser glazing of an Fe-C-Sn alloy

Morphology and geometry of melted zones, cooling rates, microstructure and microhardness in the laser-glazed Fe-4%C-10%Sn alloy have been investigated. The computer simulation on the basis of the moving gaussian source model was used successfully to predict the maximum width and depth of the melted zone and the cooling rate. The microstructure from the surface to the bottom of the laser-melted zone is a non-crystalline phase, dendritic grains and a microcrystalline zone successively. Values of the averaged-spacing of the non-crystalline phase are 0.205⁶ and 0.121⁹nm, respectively; twinned martensites, having an axial ratioc/a of 1.128, existed in dendritic grains, and carbides of Fe₃ C at the interdendritic regions; the microcrystalline zone was composed of -Fe and a new bet (a=0.415 nm,c=0.955 nm) phase. The different microstructure in the melted zone can be explained by the results of the heat flow calculation. A fine eutectic structure (-Fe + Fe₃C) was observed in heat-affected zones. Microhardness of the eutectic structure can be predicted by the empirical relation of fracture stress to the interlamellar spacing of pearlite.