Zur Modellierung von Sauterdurchmesser und Hold-up beim Einsatz eines konischen Turbinenrührers zum Dispergieren gas-flüssig

By comparing the experimental data of the Sauter-mean-diameter d ₃₂ and the hold up ? with models from literature, there are presented equations for d ₃₂ and ? for the used conical turbine in gas-liquid systems. The necessary adjustment of the proportionality constants of the literature equations will be explained on the basis of fluiddynamical phenomena. It can be established by fluid-dynamical results of a former study carried out with laser-doppler-anemometry. Coalescence phenomena are taken into account in the model using an analogy to bubble columns. The analogy to bubble columns turns out to be suitable. Arguments for the necessity of considering the local fluiddynamics in the modelling of dispersions are presented.     

Clinical evaluation of technetium-99m-L,L-ethylenedicysteine in patients with chronic renal failure

1. Effects of feeding condition from birth were examined on the sensitivity of neuromuscular transmission to d-tubocurarine (dTc) in vitro in male mice of the ddY strain. 2. Mice were trained to climb two separated cylindrical steel-wire tubes for feeding and drinking, respectively, from 16 days of age. Some mice were conventionally fed, from 99 days of age. Nerve-muscle preparations were made from the left phrenic nerve diaphragm muscle (DPH), the sciatic nerve soleus muscle (SOL), and the sciatic nerve extensor digitorum longus muscle (EDL) of 99-day-old and 155-day-old mice. The nerve trunk was electrically activated with trains of four pulses and tetanic pulses. 3. The sensitivity to the effects of dTc decreased in the order EDL, SOL, and DPH. This result held true in all mice tested. 4. This sensitivity was significantly potentiated by the compulsory movement. 5. The supersensitivity remained even when mice were conventionally fed after 99 days of age. 6. The compulsion rendered EDL antifatigable on tetanic stimulation. This property was also retained after a return to conventional feeding. 7. These results suggest that the effects of feeding condition from birth might remain on neuromuscular functions after termination of the conditioning.     

Short cue presentations encourage advance task preparation: A recipe to diminish the residual switch cost.

In the task-switching literature, it has frequently been demonstrated that although advance task preparation reduces the switch cost, it never really eliminates the switch cost. This remaining residual switch cost received much attention, and it has been argued that advance preparation is restricted in nature. In the present study, the role of task-cue presentation in the establishment of the residual switch cost was investigated. In 4 experiments, the cue was removed during the preparation interval, and it was hypothesized that this would encourage participants to complete advance task preparation. The results of all 4 experiments provided support for this hypothesis: When the cue was presented for a short time and then removed, the residual switch cost completely disappeared. This was found for different cue types. Furthermore, Experiment 3 demonstrated that it was not the presence of the cue itself but merely differences in advance task preparation that caused the effects. This suggests that advance task preparation is not as restricted in nature as previously assumed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The impact of CHP generation on CO2 emissions

The combined generation of heat and power (cogeneration) is praised by many as a technique for reducing the emissions of CO₂ in industrialized nations. This is generally true but not always. In this article we discuss the impact of some major variables on the CO₂ emission reduction capacity of cogeneration. Two sets of variables are predominant: the characteristics of the CHP process and the composition of the electricity generation sector. We highlight the interaction between the two sets of variables with the help of diagrams.     

Adsorption mode of ethyl pyruvate on platinum: an in situ XANES study

The adsorption of ethyl pyruvate on Pt(111) has been studied by in situ XANES measurements in the presence and absence of hydrogen. Depending on the hydrogen and ethyl pyruvate pressure, the C and O K‐edge spectra exhibit distinctly different angular dependence. Without hydrogen ethyl pyruvate is oriented preferentially perpendicular to the surface, indicating bonding via the O lone pairs. In the presence of hydrogen the mean orientation is more tilted towards the surface. Likely, ethyl pyruvate also interacts with Pt via its π system under these conditions. The observed angle‐dependent shift of the energy of the π* and σ* resonances indicates the coexistence of differently adsorbed ethyl pyruvate species. The experimental findings demonstrate the importance of the in situ approach for unraveling the adsorption mode of ethyl pyruvate in the enantioselective hydrogenation over cinchona‐alkaloid‐modified Pt. This revised version was published online in July 2006 with corrections to the Cover Date.     

In Situ EXAFS Study on the Chemical State of Arsenic Deposited on a NiMoP/Al2O3 Hydrotreating Catalyst

The chemical state of arsenic deposited on a NiMoP/Al₂O₃ hydrotreating catalyst exposed to ppb levels of arsenic over several years in a refinery reactor has been studied by in situ EXAFS. In the as-received As-NiMoP catalyst, arsenic is exclusively coordinated to oxygen atoms. Upon sulfiding the sample in 2%H₂S/2%H₂/96%He, the As atoms become surrounded by approximately two sulfur atoms. No evidence was found for Ni–As bond formation. A possible model for the As local environment is suggested on the basis of combined EXAFS results, STM data and FEFF8.0 simulations (program for ab initio calculations on multiple scattering XAFS and XANES). The FEFF8.0 simulations of the proposed model are in accord with the experimental data measured at the As K edge. In this model, an As atom is located at the edge of a hexagonally truncated Ni-MoS₂ slab and is blocking the active NiMoS site.     

Formation and stability of barium aluminate and cerate in NOx storage-reduction catalysts

The formation and stability of BaAl₂O₄ and BaCeO₃ in Pt-Ba/Al₂O₃ and Pt-Ba/CeO₂ based NO_x storage-reduction (NSR) catalysts has been investigated using kinetic measurements, X-ray diffraction, thermal analysis and X-ray absorption spectroscopy. In as-prepared state, the Ba-component in the NSR catalysts was made up of amorphous BaO and BaCO₃. The formation of BaAl₂O₄ started above 850 °C, whereas the formation of BaCeO₃ was already observed at 800 °C and was faster than that of BaAl₂O₄. The stability of BaAl₂O₄ and BaCeO₃ in various liquid and gaseous atmospheres was different. BaAl₂O₄ was rapidly hydrated at room temperature in the presence of water and transformed to Ba(NO₃)₂ and γ-alumina in the presence of HNO₃, whereas BaCeO₃ was decomposed to much lower extent under these conditions. Interestingly, BaCeO₃ was transformed to Ba(NO₃)₂/CeO₂ in the presence of NO₂/H₂O at 300–500 °C. Also, the presence of CO₂ led to decomposition of barium cerate, which has important consequences for the catalyst ageing under NO_x-storage conditions and can be exploited for regeneration of thermally aged NSR-catalysts.     

A constant-time dynamic storage allocator for real-time systems

Dynamic memory allocation has been used for decades. However, it has seldom been used in real-time systems since the worst case of spatial and temporal requirements for allocation and deallocation operations is either unbounded or bounded but with a very large bound. In this paper, a new allocator called TLSF (Two Level Segregated Fit) is presented. TLSF is designed and implemented to accommodate real-time constraints. The proposed allocator exhibits time-bounded behaviour, O(1), and maintains a very good execution time. This paper describes in detail the data structures and functions provided by TLSF. We also compare TLSF with a representative set of allocators regarding their temporal cost and fragmentation. Although the paper is mainly focused on timing analysis, a brief study and comparative analysis of fragmentation incurred by the allocators has been also included in order to provide a global view of the behaviour of the allocators. The temporal and spatial results showed that TLSF is also a fast allocator and produces a fragmentation close to that caused by the best existing allocators.

Experimental test of a robust formation controller for marine unmanned surface vessels

Experiments with two formation controllers for marine unmanned surface vessels are reported. The formation controllers are designed using the nonlinear robust model-based sliding mode approach. The marine vehicles can operate in arbitrary formation configurations by using two leader-follower control schemes. For the design of these controller schemes 3 degrees of freedom (DOFs) of surge, sway, and yaw are assumed in the planar motion of the marine surface vessels. Each vessel only has two actuators; therefore, the vessels are underactuated and the lack of a kinematic constraint puts them into the holonomic system category. In this work, the position of a control point on the vessel is controlled, and the orientation dynamics is not directly controlled. Therefore, there is a potential for an oscillatory yaw motion to occur. It is shown that the orientation dynamics, as the internal dynamics of this underactuated system, is stable, i.e., the follower vehicle does not oscillate about its control point during the formation maneuvers. The proposed formation controller relies only on the state information obtained from the immediate neighbors of the vessel and the vessel itself. The effectiveness and robustness of formation control laws in the presence of parameter uncertainty and environmental disturbances are demonstrated by using both simulations and field experiments. The experiments were performed in a natural environment on a lake using a small test boat, and show robust performance to parameter uncertainty and disturbance. This paper reports the first experimental verification of the above mentioned approach, whose unique features are the use of a control point, the zero-dynamic stability analysis, the use of leader-follower method and a nonlinear robust control approach.