Collective institutional work: the case of Airbnb in Amsterdam,London and New York

ABSTRACT

Given that online platforms disrupt established industries and challenge existing institutions, they can only be successful if their innovation becomes both legal and legitimate. This requires ‘institutional work’ that changes perceptions and regulations within society. Rather than only focussing on the online platform as the sole agent engaging in institutional work, our study analyses institutional work as a collective process. We investigate the case of home-sharing platform Airbnb and the process of institutional change its introduction prompted regarding short-term rental in Amsterdam, London and New York. We find, contrary to the popular view of online platforms as disruptive entrepreneurs, that the platform mainly focusses on creating new institutions rather than disrupting existing ones, and that users and non-users undertake most of the institutional work activities. We also show that different types of actors carry out different types of institutional work suggesting that the process of institutional work is highly distributed.     

Color preferences for different topics in connection to personal characteristics

Studies on color preferences are dependent on the topic and the relationships with personal characteristics, particularly personality, but these are seldom studied in one population. Therefore a questionnaire was collected from 1095 Dutch people asking for color preferences about different topics and relating them to personal characteristics. Color preferences regarding different topics show different patterns and significant differences were found between gender, age, education and personality such as being technical, being emotional or being a team player. Also, different colors were mentioned when asked for colors that stimulate to be quiet, energetic, and able to focus or creative. Probably, due to unconsciousness of contexts, many people had no color preference, a result that in the literature seldom is mentioned. Blue was the overall favorite color; however, most males chose for blue (25%) while most females had no color preference (18%). Black was the overall favorite color for clothing, mainly chosen by females (40%), while males primarily chose blue (27%). For building interiors subjects preferred white. For moods, subjects preferred white for being quiet or being able to focus, red for being energetic and had no color preference for being creative. It is concluded that color preferences are dependent upon the topic, and personal characteristics. The findings are important for architects, interior designers, fashion designers and product designers to have a basic idea of preferred colors for different objects by different types of people. © 2013 Wiley Periodicals, Inc. Col Res Appl, 40, 62–71, 2015     

Sustainable biocarbon as an alternative of traditional fillers for poly(butylene terephthalate)-based composites: Thermo-oxidative aging and durability

Sustainable biocomposites have gained considerable interest as an alternative to conventional composites in recent years due to their cost-effectiveness and environmental friendliness. The aim of this study was to investigate the performance and durability behavior of biocomposites from sustainable biocarbon (BC) as compared to conventional established fillers. The poly(butylene terephthalate) (PBT) and its composites reinforced with BC, talc, and glass fiber (GF) were prepared and the durability performances was investigated. The study showed that BC/PBT biocomposites provided a lighter weight alternative to traditionally used fillers. After undergoes thermo-oxidative aging, the mechanical properties of BC/PBT biocomposite were deteriorated. The GF/PBT showed the most stable in retaining its mechanical properties in comparison to the talc/PBT and BC/PBT. The aging behavior and mechanism of the PBT composites were discussed. This study provides further insight on the durability-related properties progression of biocomposites as compared to traditional used fillers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47722.     

A dual-mode bandpass filter with enhanced capacitive perturbation

A dual-mode ring bandpass filter with two pairs of capacitors has been designed. The capacitors are used to control the location of the even- and odd-mode frequencies independently, allowing weak coupling for narrow-band filter design with realizable capacitance values. Theoretical expressions have been derived for these frequencies. A 4% bandwidth bandpass filter centered at 1.9 GHz was designed and tested with good agreement between theoretical and measured results.     

Ice-slurry production using direct contact heat transfer

An ice slurry generation system was developed using direct contact heat transfer between water and the coolant, Fluroinert FC-84. The location of the coolant nozzle is an important design consideration to avoid clogging due to freezing of water. An ice fraction of up to about 40 percent was obtained with the nozzle located at the bottom of the ice slurry tank and the jet directed upwards into the water. Two simplified model were developed to extract the heat transfer coefficient between the coolant drops and the water. The first model requires as input the average drop diameter and the residence time while the second model uses the measured drop diameter distribution. The estimated heat transfer coefficients are much smaller than those computed using single-sphere correlations.     

Using indices to differentiate dimensions of knowledge regarding modes of HIV transmission in the U.S. population, 1987-1989

Spores of Bacillus subtilis NCTC 8236 were treated with glutaraldehyde, Lugol's iodine, polyvinylpyrrolidone-iodine (PVP-I), sodium hypochlorite or sodium dichloroisocyanurate (NaDCC). After exposure survivors were enumerated on nutrient agar containing potential revival agents (subtilisin, lysozyme, calcium dipicolinate, calcium lactate). Of these, only calcium lactate had any significant enhancing effect and then only with iodine-treated spores. Calcium lactate (9 mmol l-1) in nutrient broth enhanced the rate and extent of germination of iodine-treated spores but not of spores previously subjected to glutaraldehyde, hypochlorite or NaDCC.     

Model of a miniature pig catheterized for pharmacokinetic and pharmacodynamic studies of anti-infective agents

The purpose of this study was to examine the role of sleep problems in the etiology of nursing caries. Two-hundred mothers of children (104 with nursing caries and 96 caries free) from ages 2 to 4.5 years were surveyed to determine whether difficulty with child sleep and ensuing sleep-associated feeding might be related to the presence of nursing caries. Differences were noted between these two groups regarding: average number of nights the child slept through the night (P < 0.001); total hours of sleep per night (P < 0.05); frequency of night waking episodes (P < 0.01); feeding on demand upon waking (P < 0.01); using a bottle to assist with falling asleep at night (P < 0.001); and feeding in association with nap time (P < 0.001). Differences also were noted in regard to average age of weaning (P < 0.001). Our findings suggest that sleep problems among young children are a behavioral risk factor for night-time bottle use and early childhood caries.     

Circuit topologies for single-phase voltage-doubler boostrectifiers

A new family of single-phase voltage-doubler PWM (pulse width modulated) boost rectifiers is presented. By examining the switching states of several standard single-phase boost rectifier circuits, three characteristic PWM voltage switching patterns are identified: unipolar PWM; bipolar PWM; and phase-adjusted unipolar PWM. From this analysis, an equivalent family of voltage-doubler rectifiers is derived. When high output voltages are required, voltage-doubler rectifiers are shown to be able to generate AC line currents with the lowest current distortion. The circuits presented are examined using circuit simulators and experimental results     

Endgroup analysis of polyethylene glycol polymers by matrix-assisted laser desorption/ionization Fourier-transform ion cyclotron resonance mass spectrometry

Fourier-transform ion cyclotron resonance mass spectrometry (FTICR-MS) by external injection of matrix-assisted laser desorbed and ionized (MALDI) polymers offers good possibilities for characterization of low molecular weight homopolymers (MW range up to 10 kDa). The molecular masses of the molecular weight distribution (MWD) components of underivatized and derivatized (dimethyl, dipropyl, dibutyl and diacetyl) polyethylene glycol (PEG) 1000 and 4000 were measured by MALDI-FTICR-MS. These measurements have been performed using a commercial FTICR spectrometer with a home-built external ion source. MALDI of the samples with a 2,5-dihydroxybenzoic acid matrix in a 1000:1 matrix-to-analyte molar ratio produces sodiated molecules in a sufficient yield to trap the ions in the ICR cell. The masses of the molecular weight distribution of PEG components were measured in broad-band mode with a mass accuracy of < 5 ppm in the mass range around 1000 u and within 40 ppm accuracy around 4000 u. From these measurements, the endgroup mass of the polymer was determined by correlation of the measured component mass with the degree of polymerization. The masses of the PEG endgroups have been determined within a deviation of 3-10 millimass units for the PEG1000 derivatives and 10-100 millimass units for the PEG4000 derivatives, thus confirming the identity of the distal parts of the model compounds.