Enhanced thermal stability of poly(lactide)s in the melt by enantiomeric polymer blending

Poly(l-lactide) (i.e. poly(l-lactic acid) (PLLA)) and poly(d-lactide) (i.e. poly(d-lactic acid) (PDLA)) and their equimolar enantiomeric blend (PLLA/PDLA) films were prepared and the effects of enantiomeric polymer blending on the thermal stability and degradation of the films were investigated isothermally and non-isothermally under nitrogen gas using thermogravimetry (TG). The enantiomeric polymer blending was found to successfully enhance the thermal stability of the PLLA/PDLA film compared with those of the pure PLLA and PDLA films. The activation energies for thermal degradation (ΔE_td) were evaluated at different weight loss values from TG data using the procedure recommended by MacCallum et al. The ΔE_td values of the PLLA/PDLA, PLLA, and PDLA films were in the range of 205-297, 77-132, and 155-242 kJ mol⁻¹ when they were evaluated at weight loss values of 25-90% and the ΔE_td value of the PLLA/PDLA film was higher by 82-110 kJ mol⁻¹ than the averaged ΔE_td value of the PLLA and PDLA films. The mechanism for the enhanced thermal stability of the PLLA/PDLA film is discussed.     

Microstructures of functionally graded materials fabricated by centrifugal solid-particle andin-situ methods

Functionally graded materials (FGMs) belong to a relatively new class of inhomogeneous composite materials, in which the composition and/or microstructure undergo a gradual change along some directions. In this review article, the microstructures and composition gradients in Al/SiC, Al/Shirasu (volcanic eruptions commonly found in south Kyushu in Japan), Al/Al₃Ti, Al/Al₃Ni, Al/Al₂Cu FGMs have been investigated. The Al/SiC, Al/Shirasu and Al/Al₃Ti FGMs are fabricated by the centrifugal solid particle method where the distribution particles of SiC, Shirasu and Al₃Ti are solids in the melts. On the other hand, Al/Al₃Ni and Al/Al₂Cu FGMs are fabricated by the centrifugalin-situ method where Al/Al₃Ni and Al/Al₂Cu systems have lower liquidus temperatures than the processing temperatures. The feature of Al/(Al₃Ti−Al₃Ni) hydrid FGM, which is fabricated by a method combining both the centrifugal solid-particle andin-situ methods, is also shown.     

Discharge properties and chemical stability of SrZrO films

Abstract— MgO thin film is currently used as a surface protective layer for dielectric materials because MgO has a high resistance during ion sputtering and exhibits effective secondary electron emission. The secondary‐electron‐emission coefficient γ of MgO is high for Ne ions; however, it is low for Xe ions. The Xe content of the discharge gas of PDPs needs to be raised in order to increase the luminous efficiency. Thus, the development of high‐γ materials replacing MgO is required. The discharge properties and chemical surface stability of SrO containing Zr (SrZrO) as the candidate high‐γ protective layer for noble PDPs have been characterized. SrZrO films have superior chemical stability, especially the resistance to carbonation because of the existence of a few adsorption sites due to their amorphous structure. The firing voltage is 60 V lower than that of MgO films for a discharge gas of Ne/Xe = 85/15 at 60 kPa.     

Morphological characteristics of flood refugia of cobble-bed vegetation

Periodic flooding alters riverine vegetation community composition; moderate flood disturbance maintains communities at an early seral stage, whereas severe floods may remove entire communities. After disturbance, plants may recolonize riverbeds from refugia.Here, we investigated the morphological characteristics of refugia where riverine plants survived large floods. At three sites, plant communities growing on cobble-bars were surveyed, and the hydraulic characteristics of each site were analyzed. The populations of an indicator plant, Anaphalis margaritacea sub-species yedoensis (Franch. et Savat.) were assessed after major floods in 2004 and 2009. At each survey, the particle size and bed composition were measured, and the critical shear-stress required to move particles at each site was calculated. A one-dimensional flow and the average and local shear-stress at ten different discharges, including that of the largest flood were calculated. The results demonstrate that the A. margaritacea community is maintained at locations where the local shear-stress at peak discharge in large-floods does not exceed a critical value. These conditions were achieved in locations with particular morphological characteristics, where the river is not constrained by levees and is restricted by a downstream narrow-pass; in this reach river width increases with discharge thus limiting the increase in water depth with increasing discharge and allowing the establishment of refugia where plant species may survive large floods.Flooding and reestablishment from refugia maintain a characteristic riverbed community in equilibrium.     

Three dimensional virtual crack closure-integral method (VCCM) with skewed and non-symmetric mesh arrangement at the crack front

In this paper, an extension of virtual crack closure-integral method (VCCM) for three dimensional linear fracture mechanics analysis using hexahedron finite elements is presented. In conventional three dimensional VCCM, there are some inherent requirements on the finite element model. They are (i) the faces of finite elements across the crack front have the same areas and (ii) they must be arranged symmetrically across the crack front. In present study, we developed a three dimensional VCCM without such requirements by considering work required to open one element face area whose shape is arbitrary. Though we assume the use of an ordinary 20 node serendipity element, present approach can be applied to other types of hexahedron elements.     

Hematopoietic–Mesenchymal Signals Regulate the Properties of Mesenchymal Stem Cells

It is well known that the properties of hematopoietic stem/progenitor cells (HSCs), such as their self-renewal ability and multipotency, are maintained through interactions with mesenchymal stem/stromal cells (MSCs). MSCs are rare cells that are present in the bone marrow and are useful for clinical applications due to their functional ability. To obtain the necessary number of cells, MSCs must be cultured to expand, but this causes a remarkable decrease in stem cell properties, such as multipotency and proliferation ability. In this study, we show that the c-Mpl signal, which is related to the maintenance of hematopoietic stem cells, has an important effect on the proliferation and differentiation ability of MSCs. Utilizing a co-culture system comprising MSCs and HSCs, it is suggested that signaling from hematopoietic cells to MSCs supports cell proliferation. Interestingly, the enhanced proliferation ability of the HSCs was decreased in c-Mpl knock-out HSCs (c-Mpl-KO). In addition, the MSCs co-cultured with c-Mpl-KO HSCs had reduced MSC marker expression (PDGFRa and Sca-1) compared to the MSCs co-cultured with c-Mpl-wild-type HSCs. These results suggest that a hematopoietic–mesenchymal signal exists, and that the state of the HSCs is important for the stability of MSC properties.     

Process development for industrial-scale preparation of carboxypeptidase Y secreted by Saccharomyces cerevisiae

A method for industrial-scale preparation of carboxypeptidase Y (CPY), which was secreted by Saccharomyces cerevisiae KS58-2D/pCY303 into the culture broth, was developed. Because the purification process consists of a few simple unit operations including only one chromatography step, a higher CPY recovery was achieved than that in the process using disrupted baker's yeast. Approximately 100 g of purified CPY powder was constantly obtained using the final culture broth from a 500-l fermentor.     

Development and field test of the articulated mobile robot T2 Snake-4 for plant disaster prevention

Abstract

In this work, we develop an articulated mobile robot that can move in narrow spaces, climb stairs, gather information, and operate valves for plant disaster prevention. The robot can adopt a tall position using a folding arm and gather information using sensors mounted on the arm. In addition, this paper presents a stair climbing method using a single backward wave. This method enables the robot to climb stairs that have a short tread. The developed robot system is tested in a field test at the World Robot Summit 2018, and the lessons learned in the field test are discussed.     

Advanced Method for Measuring Proteinase A in Beer and Application to Brewing*

Proteinase A, excreted from yeast cells into beer during fermentation in the brewing process, has been shown to degrade foam-active proteins and to decrease foam stability. In order to improve the measurement of this enzyme in beer, a new fluorescent peptide, MOCAc-Ala-Pro-Ala-Lys-Phe-Phe-Arg-Leu-Lys (Dnp)-NH₂, was synthesised and applied to the accurate and rapid estimation of proteinase A in commercial beer and fermenting wort. This novel substrate is several hundred times more sensitive to proteinase A than other previously reported synthetic substrates or native protein substrates. The concentration of proteinase A in beer is closely related to foam stability and proteinase A activity was found to increase gradually during fermentation. The concentration of proteinase A excreted from yeast cells is also closely related to the vitality of pitching yeast cells. This new method was successfully applied to the evaluation of yeast vitality and the development of optimum yeast handling procedures.