Metal-containing intermacromolecular complexes: Electrochemical and viscometric studies in DMF-methanol mixture

Summary Multicomponent intermacromolecular complexes have been prepared from some typical phenolic copolymers with a non-ionic polymer (e.g. PVP), and a polyelectrolyte (e.g. PAA). Some transition metal ions (e.g. Cu(II) and Ni (II)) have been incorporated in the complex through its unreacted co-ordinating groups. The formation of these complexes has been studied by several techniques, such as viscometry, conductometry, potentiometry, IR and UV spectrophotometry. A scheme has been presented to explain the mode of interaction of the various components.     

Intelligent control of static synchronous series compensator via an adaptive self-tuning PID controller for suppression of torsional oscillations

In this paper, an intelligent controller is proposed to control a static synchronous series compensator (SSSC) in order to mitigate subsynchronous resonance (SSR) oscillations in a power system. This intelligent controller is an adaptive self-tuning PID controller. To train the PID controller, the gradient descent method is employed where the learning rate is adapted in every iteration in order to accelerate the speed of convergence. This control scheme also requires a wavelet neural network (WNN) to identify the controlled system dynamic. To update the parameters of WNN, the gradient descent (GD) along with the adaptive learning rates derived by the Lyapunov method is used. The computer simulations are used to show the ability of the proposed controller. In addition, the performance of the proposed controller is compared with another self-tuning PID controller. The results demonstrate that the proposed controller has a successful performance in minimizing the SSR.     

Design, fabrication and analysis of micromachined high sensitivity and 0% cross-axis sensitivity capacitive accelerometers

This paper presents the design and fabrication of three MEMS based capacitive accelerometers. The first design illustrates the achievement of an accelerometer with 0% cross-axis sensitivity and has been fabricated using PolyMUMPs, a multi-user surface-micromachining process. A unidirectional parallel plate configuration is utilized in this design to illustrate the achievement of 0% cross-axis sensitivity and an acceptable performance range. In addition, a method is introduced to improve the sensitivity of a capacitive sensor employing a transverse configuration based on the relationship of initial gaps setup in comb-finger arrangements. A design based on this technique and the PolyMUMPs fabrication process is illustrated which demonstrates a sensitivity value of 4.07 fF/μm, with a nonlinearity of 2.05% for a ±3 μm sensor operating range. The last design based on this method and the SOIMUMPs fabrication process exhibits a sensitivity of 3.45 pF/μm for ±1 μm operating range of the sensor.     

A general methodology for bearing design in non-symmetric T-shaped sections in extrusion process

In this study, a general methodology has been developed to design the proper bearing in order to eliminate the curvature of the final product in extrusion process. Three smooth curved (advanced-surface) dies with non-symmetric T-shaped sections and different off-centricities have been studied. For each die, the proper bearing has been designed and physical and numerical modeling have been performed to validate the design. The design procedure is as follows: A formulation, based on Bezier curves, has been used to determine the exit velocity profile. Since the result of Bezier method is different from the actual velocity profile, the Chitkara corrective function has been modified and applied to improve the velocity field. A deviation function has been developed to measure the curvature of the final product in terms of the exit velocity field. Considering the obtained velocity field, the friction effects, and the geometry of the dies, the proper bearing for each die has been designed. Finally, numerical and physical modeling have been performed on the die-bearing combination. According to the results, the curvature of the final product was eliminated to a great extent.     

A Novel Approach for Controlling the Band Formation in Medium Mn Steels

Formation of the microstructural ferrite/pearlite bands in medium Mn steels is an undesirable phenomenon commonly addressed through fast cooling treatments. In this study, a novel approach using the cyclic partial phase transformation concept is applied successfully to prevent microstructural band formation in a micro-chemically banded Fe-C-Mn-Si steel. The effectiveness of the new approach is assessed using the ASTM E1268-01 standard. The cyclic intercritical treatments lead to formation of isotropic microstructures even for cooling rates far below the critical one determined in conventional continuous cooling. In contrast, isothermal intercritical experiments have no effect on the critical cooling rate to suppress microstructural band formation. The origin of the suppression of band formation either by means of fast cooling or a cyclic partial phase transformation is investigated in detail. Theoretical modeling and microstructural observations confirm that band formation is suppressed only if the intercritical annealing treatment leads to partial reversion of the austenite-ferrite interfaces. The resulting interfacial Mn enrichment is responsible for suppression of the band formation upon final cooling at low cooling rates.