Stent endoprosthesis for obstructing colorectal cancers

We present the case of a patient in whom hypotension, sudden cardiopulmonary arrest, and coma developed after a massive dose of a seemingly harmless cathartic agent. The diagnosis of hypermagnesemia was made 9 hours after the patient's admission, when the serum magnesium concentration was 21.7 mg/dL (8.9 mmol/L). The patient's condition improved with IV calcium, saline solution infusion, and cardiorespiratory support. The elimination half-life of magnesium in this case was 27.7 hours. Few cases have been reported in which patients have survived with serum levels greater than 18 mg/dL (7.4 mmol/L). This case provides evidence that hypermagnesemia may occur in patients with normal kidney function. The diagnosis of hypermagnesemia should be considered in patients who present with symptoms of hyporeflexia, lethargy, refractory hypotension, shock, prolonged QT interval, respiratory depression, or cardiac arrest.     

STRUCTURE FORMATION OF COATED FILMS WITH DISPERSED PIGMENTS DURING DRYING

In the drying of coated films with dispersed pigments, such as floppy disks, the structure of the film is formed during the drying process and depends on the drying condition. It is important to understand the structure formation during drying for the design of the dryer and die better quality of the product. We measured die drying characteristics of the film and determined the structure of dried film experimentally. A qualitative model for the structure formation during drying of the coated film is suggested.     

Effect of the Chiral Center Position of an Optically Active Terminal Group on the Induction of Optical Activity in Polysilanes

Summary Polysilanes with an optically active alkoxy group, i.e., (S)-(+)-2-butoxy, (R)-(-)-2-butoxy, (S)-(-)-2-methyl-1-butoxy, and (S)-(+)-3,7-dimethyl-1-octoxy, at the terminal positions, the chiral carbon centers of which were located at the α, β, and γ positions relative to the oxygen, respectively, were prepared, and the effect of the position of chiral center of the terminal optically active group on the induction of optical activity in polysilanes was investigated. The circular dichroism (CD) spectra of these polymers showed positive Cotton signals around 340 nm at temperatures below -20 °C, but the intensities were small, indicating that the optically active groups at the terminal positions have some ability, albeit small, to induce optical activity to the polysilanes. Further, the optically active (S)-(+)-2-butoxy and (R)-(-)-2-butoxy groups did not control the helical sense direction of the polymers, despite the different chiral stimuli from the 2-butoxy groups introduced to the terminal positions. To control the helical structure of polysilanes by the use of optically active terminal groups, appropriate optically active groups are required.     

First measurement of electron temperature from signal ratios in a double-pass Thomson scattering system

This paper presents an experimental demonstration to determine electron temperature (T(e)) with unknown spectral sensitivity (transmissivity) in a Thomson scattering system. In this method, a double-pass scattering configuration is used and the scattered lights from each pass (with different scattering angles) are measured separately. T(e) can be determined from the ratio of the signal intensities without knowing a real chromatic dependence in the sensitivity. Note that the wavelength range for each spectral channel must be known. This method was applied to the TST-2 Thomson scattering system. As a result, T(e) measured from the ratio (T(e,r)) and T(e) measured from a standard method (T(e,s)) showed a good agreement with <∣T(e,r) - T(e,s)∣∕T(e,s)> = 7.3%.     

Characterization by Stm and Electrical Conductivity of Single-Walled Carbon Nanotubes

Abstract

Single-walled carbon nanotubes (SWCNT) prepared by a DC-Arc-Discharge and purified by a hydrothermal treatment followed by several steps of procedures including heating, burning, extracting and acid-washing are investigated by a conventional STM technique morphologically and spectroscopically. The electical resistivities of compacted pellets (mats) of SWCNT are measured as a function of temperature in the range from the room-temperature to 1.5K. The behaviors seems to be essentially originated in the metallic nature of individual SWCNT.     

Perpendicular oriented cylinders via directional coalescence of spheres embedded in block copolymer films induced by solvent annealing

Polystyrene-b-poly(methyl acrylate) (PS-b-PMA) block copolymer with PS volume fraction of 25.2 vol% was synthesized by atom transfer radical polymerization. Non-pretreated silicon wafers were used as the substrates to prepare perpendicular oriented PS cylinders in PMA matrix via solvent annealing which could induce the transformation of spheres to vertically oriented and hexagonally packed cylinders. The spherical microdomains were formed after the evaporation of solvents from the solutions of the block copolymer in selective solvents mixed from methanol, acetone and dichloromethane. The thickness of films could be as thick as 1000 nm, which were much thicker than usual cases and the cylinders came from the directional coalescence of the spheres, thus any pre-treatments of the substrates were not required for perpendicular orientation. The structures were characterized by small angle X-ray scattering (SAXS), transmission electron microscope (TEM), atom force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS).     

Estimating Land Use Impacts on Regional Scale Urban Water Balance and Groundwater Recharge

Anthropogenic activities have exerted increasingly large-scale influences on terrestrial ecological systems from the past century, primarily through agriculture; however, the impact of such changes on the hydrologic cycle is poorly understood. As one of the important land use (LU) in the coastal Dogo Plain of the Seto Inland Sea, Japan, paddy fields have been decreasing with the increase in urbanization in recent decades. As the main source of water in the Dogo Plain, groundwater plays an important role in providing people with fresh water and contributing to stream base flow. The purpose of this study is to analyze the water resource and evaluate the effect of LU change on groundwater table fluctuation in this coastal plain. Firstly, the observations of groundwater table and the investigation of water balance were carried out in this alluvial plain. Then, a distributed four-block three-layer water balance model was employed to analyze the groundwater table fluctuation with response to the change of paddy field area. Moreover, the role of paddy field in recharging groundwater in the basin has been clarified. Results show that groundwater table depends not only on rainfall and discharge from rivers, but also on irrigation water and topology of the study area. The net groundwater recharge was positive in irrigation periods whereas that in non-irrigation periods was nearly equal to zero or negative. The results of this study would be helpful to the urban development policy and land use planning decision.     

Generalized stress intensity factors in the interaction between two fibers in matrix

To evaluate the mechanical strength of fiber reinforced composites it is necessary to consider singular stresses at the end of fibers because they cause crack initiation, propagation, and final failure. The singular stress is expressed by generalized stress intensity factors defined at the corner of fibers. As a 2D model an interaction between rectangular inclusions under longitudinal tension is treated in this paper. The body force method is used to formulate the problem as a system of singular integral equations with Cauchy-type or logarithmic-type singularities, where the unknown functions are the densities of body forces distributed in infinite plates having the same elastic constants as those of the matrix and inclusions. In order to analyze the problem accurately, the unknown functions are expressed as piecewize smooth functions using two types of fundamental densities and power series, where the fundamental densities are chosen to represent the symmetric stress singularity of 1/r ^1– ₁ and the skew-symmetric stress singularity of 1/r ^1– ₂. Then, generalized stress intensity factors at the end of inclusions are systematically calculated for various locations, spacings and elastic modulus of two rectangular inclusions in a plate subjected to longitudinal tension.