The polymerisation of 2-furyl vinyl ketone

Summary 2-Furyl vinyl ketone was polymerised using anionic, cationic and free-radical initiators. Yields and molecular weights varied with the type of activation. Whereas radical polymerisation gave a product possessing a regular vinylic structure, other kinds of units were detected in the polymers prepared with anionic and cationic catalysts.     

Modification of industrial polypropylene film by grafting of poly(acrylic acid)

Grafting of poly(acrylic acid) onto commercial polypropylene films following irradiation by γ-rays was carried out in order to improve their surface properties. The amount of grafting with the irradiation dose was found not to follow the expected linear dependence as it is normally observed for polypropylene films prepared in laboratory amounts. We therefore analyzed the influence of the industrial manufacture process in terms of orientation of the film and addition of antioxidants by determining the peroxide surface density and the extent of grafting therefrom. The unoriented polypropylene film presented the highest peroxide concentration and was thus the most adapated material for successful grafting. Whereas phenol antioxidants limit the peroxide formation and thus must be removed from the film for grafting, the thickness of the chemical modification and can be controlled by means of phosphites. Atomicforce microscopy and wettability measurements showed that the grafted poly(acrylic acid) was heterogeneously distributed on the surface of the film, explaining the observed low reproducibility of the grafting reaction. However, we observed that the polarity of the surface was increased by the grafting. © 1995 John Wiley & Sons, Inc.     

Design of microfluidic channels for magnetic separation of malaria-infected red blood cells

This study is motivated by the development of a blood cell filtration device for removal of malaria-infected, parasitized red blood cells (pRBCs). The blood was modeled as a multi-component fluid using the computational fluid dynamics discrete element method (CFD-DEM), wherein plasma was treated as a Newtonian fluid and the red blood cells (RBCs) were modeled as soft-sphere solid particles which move under the influence of drag, collisions with other RBCs, and a magnetic force. The CFD-DEM model was first validated by a comparison with experimental data from Han and Frazier (Lab Chip 6:265–273, 2006) involving a microfluidic magnetophoretic separator for paramagnetic deoxygenated blood cells. The computational model was then applied to a parametric study of a parallel-plate separator having hematocrit of 40 % with 10 % of the RBCs as pRBCs. Specifically, we investigated the hypothesis of introducing an upstream constriction to the channel to divert the magnetic cells within the near-wall layer where the magnetic force is greatest. Simulations compared the efficacy of various geometries upon the stratification efficiency of the pRBCs. For a channel with nominal height of 100 µm, the addition of an upstream constriction of 80 % improved the proportion of pRBCs retained adjacent to the magnetic wall (separation efficiency) by almost twofold, from 26 to 49 %. Further addition of a downstream diffuser reduced remixing and hence improved separation efficiency to 72 %. The constriction introduced a greater pressure drop (from 17 to 495 Pa), which should be considered when scaling up this design for a clinical-sized system. Overall, the advantages of this design include its ability to accommodate physiological hematocrit and high throughput, which is critical for clinical implementation as a blood-filtration system.     

Polyamides incorporating furan moieties. 5. Synthesis and characterisation of furan-aromatic homologues

2,2′-Bis (5-chloroformyl 2-furyl) propane and various aromatic diamines were used as monomers in the study of their interfacial polycondensation and the properties of the ensuing furanic-aromatic polyamides. The effects of such variables as the nature of the organic phase, the temperature, the reaction time, and the type and concentration of the catalyst were investigated as well as the properties of the polyamides in terms of structure, average chain length, T_g, T_m and thermal stability.     

Urethanes and polyurethanes based on oxypropylated cork: 1. Appraisal and reactivity of products

The reaction of various polyols derived from the oxypropylation of cork with aliphatic and aromatic mono‐ and diisocyanates was studied in solution at room temperature. In all instances, good second‐order kinetics were observed and the corresponding rate constant determined. The reactivity of the aromatic isocyanate was found to be much higher than that of aliphatic counterparts. The ensuing urethanes and polyurethanes were characterised by FTIR and ¹H NMR spectroscopy, DSC and sol/gel distribution. © 2001 Society of Chemical Industry     

Reactions of cellulose and wood superficial hydroxy groups with organometallic compounds

Various lignocellulosic substrates, including microcrystalline cellulose, pinewood and hemp fibres, were treated with triethylaluminium and triethylboron in suspensions, in non‐swelling media. Chemical and spectroscopic analyses show that coupling surface reactions took place between one or two metal‐to‐carbon (Mt–C) bonds and the OH groups of the natural polymers. The remaining unreacted Mt–C bonds were exploited to graft numerous molecular structures derived from alcohols and amines. The occurrence of the second reaction was proved by Fourier‐transform infrared spectroscopy, elemental analyses, X‐ray photoelectron spectroscopy and contact angle measurements. Copyright © 2004 Society of Chemical Industry     

Recent Catalytic Advances in the Chemistry of Substituted Furans from Carbohydrates and in the Ensuing Polymers

In this review, an overview is given on the last development of catalytic methods for the preparation of substituted furans from carbohydrates and ensuing polymers. The review starts with the recent aspects in the synthesis of some key furan monomers in the presence of solid catalysts. In the second part, selected examples are given of polymerization systems leading to furan-based materials with promising properties, thus constituting a serious alternative to petroleum-based counterparts. Finally, a short examination is given on what could be the future of furan chemistry with the recent development of ionic liquids as solvents.     

Current noise in MgB2 superconducting thin films

In this paper we present some experimental results concerning the current noise produced during the resistive transition in MgB₂ thin films. Preliminary investigations evidenced the presence of electrical noise whose power spectrum has a region of the 1/fⁿ type with n 3. We suggest that the noise may originate from abrupt rearrangement of the current distribution inside the specimen during the percolative process of a diphasic system. Experimental measurements of the spectral components of the current noise taken during the resistive transition will be given and discussed.     

Preparation of acrylated and urethanated triacylglycerols

Since a preliminary study had shown that the internal double bonds present on the unsaturated aliphatic chains were too unreactive for any viable polymerization process, chemical modifications were investigated involving the grafting of polymerizable moieties on hydroxy or epoxide groups present in castor oil or in epoxidized soybean oil. Acrylate and styrenic urethane moieties were successfully appended on these triacylglycerol molecules. The grafting processes are described and the modified oils characterized, leading to the discussion of some structure‐property relationships.     

Polyesters bearing furan moieties

Summary This paper describes a preliminary set of results concerning novel systems in which the synthesis of furanic polyesters was conducted according to a transesterification procedure. Regular linear macromolecular structures were thus obtained with molecular weights well above those previously reported for similar polyesters prepared by more conventional routes.