Electrical Properties of GeO2–NiO Materials Containing Ni2GeO4

The GeO₂–NiO system is studied in the stability range of Ni₂GeO₄ by temperature-dependent resistivity measurements, in combination with x-ray diffraction, differential thermal analysis, and thermogravimetry. The resistivity of the starting mixtures and heat-treated samples is measured in the composition range 55–90 mol % NiO. The effect of air humidity on the resistivity of the samples is examined.     

Design of a more accurate working standard for the unit of alternating current and investigation of its metrological characteristics

We consider the problem of designing and constructing a high-performance and more accurate working standard for the unit of alternating current. We present a block diagram for the apparatus.Translated from Izmeritel'naya Tekhnika, No. 10, pp. 51–52, October, 1994.     

Effect of metabolic acidosis on the potassium content of bone

Metabolic acidosis induces resorption of cultured bone, resulting in a net efflux of calcium (Ca) from the bone and an apparent loss of mineral potassium (K). However, in these organ cultures, there is diffusion of K between the medium and the crystal lattice, causing difficulty in interpretation of the acid-induced changes in mineral ion composition. To determine the effects of acidosis on bone mineral K, we injected 4-day-old neonatal mice with pure stable isotope 41K, equal to approximately 5% of their total body K. Calvariae were dissected 24 h later and then cultured for 24 h in medium without added 41K, either at pH approximately 7.4 (Ctl) or at pH approximately 7.1 (Ac), with or without the osteoclastic inhibitor calcitonin (3 x 10(-9) M, CT). The bone isotopic ion content was determined with a high-resolution scanning ion microprobe utilizing secondary ion mass spectrometry. 41K is present in nature at 6.7% of total K. The injected 41K raised the ratio of bone 41K/(39K+41K) to 9.8+/-0.5% on the surface (ratios of counts per second of detected secondary ions, mean+/-95% confidence interval) but did not alter the ratio in the interior (6.9+/-0.4%), indicating biological incorporation of the 41K into the mineral surface. The ratios of 41K/40Ca on the surface of Ctl calvariae was 14.4+/-1.2, indicating that bone mineral surface is rich in K compared with Ca. Compared with Ctl, Ac caused a marked increase in the net Ca efflux from bone that was blocked by CT. Ac also induced a marked fall in the ratio of 41K/40Ca on the surface of the calvariae (43+/-0.5, p < 0.01 vs. Ctl), which was partially blocked by CT (8.2+/-0.9, p < 0.01 vs. Ctl and vs. Ac), indicating that Ac causes a greater release of bone mineral K than Ca which is partially blocked by CT. Thus, bone mineral surface is rich in K relative to Ca, acidosis induces a greater release of surface mineral K than Ca, and osteoclastic function is necessary to support the enriched levels of surface mineral K in the presence of acidosis.     

Circular groove shaped resonator for millimeter waves

In millimeter wave lengths region semiconductor generators, amplifiers, mixers and other solid state UHF devices find a wide application. In our work, we suggested to use aCircular Through-Shaped Resonator for obtaining power combination using active elements at frequency region Δf≈20–40 GHz. The resonator is formed by two plane aluminum reflectors. The first reflector has a circular groove. The second reflector has coupling elements. The first and the second reflectors are considered as a ring groove shaped waveguide. A resonator spectrum was calculated and analyzed in the frequency range Δf ≈20–40 GHz. It is showed that, in the given frequency range the resonator spectrum has a complicated structure and is formed by a series of spectrum lines; a frequency range between the series increases with the frequency increasing. We studied on transmission coefficient of the resonator, frequency shifts of spectrum lines when inserting a thin (t/λ≈0.003) dielectric substrates into the resonator, and also attenuation constants of waves propagating in circular groove (due to losses in metal).     

Concept and salient design features of a high-temperature nuclear reactor with solid coolant

The salient features of using a solid substance to cool the core of a nuclear reactor and the associated advantages and limitations are examined. Conceptual proposals concerning the core design and the arrangement of the in-reactor space of a high-temperature nuclear reactor with a solid coolant are presented. Evaluated data and some results for a model reactor are presented. __________ Translated from Atomnaya énergiya, Vol. 103, No. 3, pp. 156–161, September, 2007.     

Optimizing parameters of complexly loaded friction bearings

Crankshaft rod bearings of a combustion engine are used as an example to show the technique and results of optimization of the design parameters of friction bearing under a complex load. The field of hydrodynamic pressures in a lubricating layer, which separates the crank pin and the bearing lining, is determined by integrating the equation for filling of the gap. This approach ensures observance of the condition of lubricant continuity at the boundaries of discontinuity and restoration of the lubricating layer. The lubricant viscosity, which is assumed to be an effective function of the temperature of the lubricating layer, is adjusted at each step of the calculation of the crank pin’s motion trajectory.     

Structure and Properties of an Ni3Al Intermetallic Compound Formed as a Result of Spark Plasma Sintering of the Powder Mixtures Prepared by Various Methods

Metallurgist - The paper described the structure and mechanical properties of nickel aluminide (Ni3Al) obtained by spark plasma sintering of the two compositions of nickel and aluminum powder...