Electrical Characterization of p-Type Pb1−x Eu x Te

The transport properties of p-type Pb_1?x Eu _x Te epitaxial layers were studied as a function of Eu content, temperature, and magnetic field. The low-temperature hole mobility is drastically reduced when the Eu concentration is increased from 0 to 6%, while the hole concentration remains almost constant. A metal-insulator transition was observed for x ≈ 0.04, which is probably induced by the disorder caused by the introduction of Eu. For temperatures down to 10 K, only positive magnetoresistance has been observed at low magnetic fields. An anomalous behavior of the resistivity as a function of temperature has been detected for a Eu content about 5%, which is attributed to the resonance between the localized Eu 4f level and the valence band maximum.     

On impulsive control of a periodically forced chaotic pendulumsystem

We consider impulsive control of a periodically forced pendulum system which has rich chaos and bifurcation phenomena. A new impulsive control method for chaos suppression of this pendulum system is developed. Some simple sufficient conditions for driving the chaotic state to its zero equilibrium are presented, and some criteria for eventually, exponentially asymptotical stability are established. This work provides a rigorous theoretical analysis to support some early experimental observations on controlling chaos in the periodically forced pendulum system     

TEM/STEM Observation of ZrC Coating Layer for Advanced High-Temperature Gas-Cooled Reactor Fuel, Part II

The Japan Atomic Energy Agency (JAEA) has started to study and develop zirconium carbide (ZrC)-coated fuel particles for advanced high-temperature gas-cooled reactors. The ZrC coating layer has been fabricated at JAEA by chemical vapor deposition using a pyrolytic reaction of zirconium bromide. The microstructures of the ZrC layers, whose nominal deposition temperatures could be measured and controlled during the deposition process, were characterized by means of TEM and STEM. In the present study, three batches were prepared and compared with each other as well as the previous batches. The crystallographic orientation of ZrC with regard to the growth direction in the ZrC layers deposited at a constant temperature of 1630 K was different from that deposited at varying temperatures in the 1493–1823 K range. A thin layer of turbostratic carbon was observed at the boundary between pyrolytic carbon and ZrC in particles deposited at the highest temperature among those used in this study (the nominal temperature was 1769 K); no such structure was found in a batch deposited at a lower temperature (the nominal temperature was 1632 K). Therefore, precise control of temperature is shown to be critical to the formation of good ZrC coatings.     

Covalent binding of peroxidized linoleic acid to protein and amino acids as models for lipofuscin formation

The fluorescent substances produced by the reaction of linoleic acid hydroperoxides (LOOH) with ca. 20 different amino acids and bovine serum albumin (BSA) were studied. Only the amino acids, lysine, glycine, arginine, histidine and phenylalanine, gave products with strong fluorescent properties. Products of lysine had a fluorescence intensity of ca. 10 times those of glycine and 100 times those of phenylalanine. The N-acylation of amino acids greatly reduced the fluorescence of the products of the reaction except lysine and arginine. The fluorescence of the products of the reaction of LOOH with N-acetyl BSA was only ca. 25% of the control BSA under the same conditions. It appeared that the substances formed from the reaction of LOOH with BSA were crosslinked polymers as evidenced by column chromatography and polyacrylamide gel electrophoresis. These products were insoluble in common organic solvents and their fluorescent intensities correlated well with the thiobarbituric acid (TBA) test. These observations appear to be highly important in the formation of lipofuscin substances, particularly those associated with the aging pigments which accumulate during aging in mammalian tissues.     

Breakdown characteristics of gas‐insulated switchgear for nonstandard lightning impulse waveforms under nonuniform electric field

To improve the insulation specification of gas‐insulated switchgear (GIS), it is necessary to recognize the insulation characteristics of SF₆ gas during actual surges (called nonstandard lightning impulse waveforms) occurring at field substations. The authors observed the insulation characteristics of SF₆ gas gap under various types of nonstandard lightning impulse waveforms and compared them quantitatively with those obtained with standard lightning impulse waveforms. The experimental results were used to derive an evaluation method for real surges, which was applied to typical surges for various UHV and 500‐kV systems. In the preceding study, therefore, only the case of a quasi‐uniform electric field (with a typical range of field utilization factors in the bus of a GIS) was investigated. In the present investigation, the insulation characteristics of an SF₆ gas gap for a nonuniform electric field were observed experimentally and an evaluation method for converting nonstandard lightning impulse waveforms equivalently to the standard lightning impulse waveform was investigated. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 177(1): 11–18, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21144     

Advanced evaluation of thermal ratchetting of FBR components

A new prediction method for the thermal ratchetting of a cylinder subjected to an axially moving temperature distribution is proposed in this paper. This ratchetting is quite different from the conventional Bree-type ratchetting, and an advanced evaluation method has been required in the structural design of FBR components. The proposed method considers the work hardening of actual materials for FBR components. Firstly the basic scheme of the prediction method is shown, and secondly the application procedure to the actual design is shown. Predicted results by using this method coincide well with experimental results, when compared with the case by using the previous method.     

Isolation and analysis of age-related fluorescent substances in rat testes

Fluorescent substances were extracted from rat testicular tissue with 2,2-dimethoxypropane (DMP) and analyzed by 2-dimensional thin layer chromatography (TLC). One substance that accumulated with increasing age of the animals was isolated and analyzed quantitatively by spectrophotofluorometry using quinine sulfate as a standard. This substance, which was designated as an age-related fluorescent substance (ARFS), exhibited an excitation maximum at 355 nm and an emission maximum at 490 nm. Its fluorescence was quenched by metal chelators and at alkaline pH, indicating it contained a conjugated Schiff base structure. Quantitative analysis of this substance in the testes of rats 1, 2, 11 and 20 months of age showed that it increased linearly with age. The relation of this substance to aging also was indicated by its detection in animals of different ages fed diets of both low and high unsaturation.     

Development of high temperature gas-cooled reactor (HTGR) fuel in Japan

This paper describes experiences and present status of research and development works for the high temperature gas-cooled reactor (HTGR) fuel in Japan. Recently, Very High Temperature Reactor (VHTR) is evaluated highly worldwide, and is a principal candidate for the Generation IV reactor systems. In Japan, HTGR fuel fabrication technologies have been developed through the High Temperature Engineering Test Reactor (HTTR) project in Japan Atomic Energy Agency since 1960’s. In total about 2 tons of uranium of the HTTR fuel has been fabricated successfully and its excellent quality has been confirmed through the long-term high temperature operation. Based on the HTTR fuel technologies, SiC TRISO fuel has been newly developed for burnup extension targeted VHTR. For ZrC-TRISO coated fuel as an advanced fuel designs, R&Ds for fabrication and inspection have been carried out in JAEA. The irradiation with the Japanese uniform stoichiometric ZrC coating has been completed in the cooperation with Oak Ridge National Laboratory of the United States.     

Determination of low levels of methanol and ethanol in licorice extract by large volume injection head-space GC

A large volume injection head-space GC method was established for measuring low levels of residual methanol and ethanol in licorice extract used a food additive. A vial was kept at 50 degrees C in the oven of the head-space sampler. Injection of the head-space gas for 0.75 min into a Poraplot Q GC column with a initial oven temperature of 35 degrees C, enabled the determination of low levels (5 micrograms/g) of methanol and ethanol. The standard deviations for five rounds of analysis of methanol and ethanol in licorice extracts were between 0.82 and 2.97. Methanol was found in 6 samples out of 9 collected in 1999, at concentrations exceeding 50 micrograms/g, the limit set by the Japanese Government, established in 1999 and coming into force on April 1, 2000. The highest concentration reached 10,000 micrograms/g. Methanol at a concentration exceeding 50 micrograms/g was found in 2 out of 9 samples collected in 2000. The highest concentration was 270 micrograms/g.