Enzymatic production of alkyl esters through alcoholysis: A critical evaluation of lipases and alcohols

This paper focuses on a detailed evaluation of commercially available immobilized lipases and simple monohydric alcohols for the production of alkyl esters from sunflower oil by enzymatic alcoholysis. Six lipases were tested with seven alcohols, including straight and branched-chain primary and secondary alcohols. The reactions were conducted in a batch stirred reaction vessel using stoichiometric amounts of substrates under solvent-free conditions. Dramatic differences in alcoholysis performance were observed among the different lipases. For most of the alcohols, Novozym 435 produced the highest yield of FA alkyl esters, with yields well over 90% for methanol, absolute ethanol, and 1-propanol. Overall, 96% ethanol was the preferred alcohol for all lipases except Novozym 435, and ethanolysis reactions reached the maximal conversion efficiency. Increasing the water content in the system resulted in an increased degree of conversion for all lipases except Novozym 435. The secondary alcohol 2-propanol significantly reduced the alcoholysis reaction with all lipases; however, the branch-chain isobutanol was more advantageous than linear 1-butanol for Novozym 435, Lipozyme RMIM, and Lipase PS-C. Many commercial immobilized lipases are highly efficient and promising for the production of alkyl esters, offering high reaction yields and a simple operation process.     

Identification of intra-individual variation in intracranial arterial flow by MRI and the effect on computed hemodynamic descriptors

Magnetic Resonance Materials in Physics, Biology and Medicine - To determine the intra-individual flow variation in serially acquired studies, and the influence of this variation on subsequent...     

Physiological and histological characterisation of a pig kidney in vitro perfusion model for xenotransplantation studies

A pig kidney perfusion model aimed for use in immunological and physiological xenotransplantation research has been developed. Organ viability was characterised by clearance studies, functional response to hormones/diureticum and by light microscopical examination. The pig kidney was perfused in a specially designed plexiglass chamber, using a roller pump and a small membrane oxygenator (O2/CO2, 95/5). The recirculating perfusate used was autologous pig blood diluted by Tyrodes solution to a hematocrit of 30%, at a total starting volume of 600-650 ml. The temperature was 37 degrees C. It was crucial for good organ function that the nephrectomy operating time, as well as the warm (1-2 min) and cold ischemia (average 43 min) times were minimized. The average total perfusion time was 151 minutes. Physiological parameters were measured during 10-15 minute periods at average times of 40, 63, 88 and 142 minutes. The clearance values of inulin in these periods were 54 +/- 13, 59 +/- 15, 48 +/- 23, 27 +/- 5 and for PAH; 103 +/- 14, 121 +/- 14, 106 +/- 30, 114 +/- 34 ml/min/100 g tissue weight. The plasma flows were 123 +/- 12, 155 +/- 17, 136 +/- 36 and 206 +/- 57 ml/min/100 g. The injection of 0.5 micrograms of alpha ANP to the perfusate resulted in a significant decrease in vascular resistance, and increase in urine production (+107%), as well as sodium (+112%) and potassium (+46%) excretion. Ten mg furosemide doubled the urine production and sodium excretion, while potassium excretion increased marginally. The number of leucocytes decreased by 39% during the perfusion, while the platelet count was unaffected. Light microscopy of the renal tissue after termination of the experiments revealed endothelial damage to variable extent. Loss of endothelial cells was most obvious at the level of arcuate and interlobular arteries, while the endothelium was intact in larger arteries and veins. Accumulation of polymorphonuclear granulocytes was found predominantly in the peritubular vessels, and to a lesser degree in the cortical venules. In the tubular cells, only minimal epithelial swelling and irregular cytoplasmic vacuolisation was found. Thus, a good functional viability can be maintained during 2 hours in vitro perfusion, although a decline in function as well as structural damage can be seen at the end of the experiment.     

Phytate content is reduced and β‐glucanase activity suppressed in malted barley steeped with lactic acid at high temperature

The effect of different steeping conditions on phytate, β‐glucan and vitamin E in barley during malting was studied by a full factorial experiment with three variables (steeping temperature, barley variety and steeping additions). Addition of lactic acid to the steeping water induced a reduction of phytate during steeping and germination, especially in combination with the high steeping temperature (48 °C). Furthermore, lactic acid and high temperature steeping inhibited β‐glucanase development, resulting in a well‐preserved β‐glucan content after germination. When steeping was conducted without addition of lactic acid, the low steeping temperature (15 °C) promoted development of both phytase and β‐glucanase activity during germination. A slightly higher level of tocopherols and tocotrienols was observed in samples steeped at 15 °C than in samples steeped at 48 °C. However, addition of lactic acid reduced the amount for both temperatures. When lactic acid bacteria were added to the steeping water none of the parameters studied differed from samples steeped with water only. The results show the possibility of combining phytate degradation with a preserved β‐glucan content during malting and can thus be of interest for development of cereal products with improved nutritional value. Copyright © 2004 Society of Chemical Industry     

Estimation of peritoneal mass transport by three-pore model in children

BACKGROUND: Computerized modeling is increasingly used to optimize the efficacy of peritoneal dialysis (PD). The Personal Dialysis Capacity (PDC) test is a new tool to model PD efficacy based on the three-pore model of peritoneal mass transport. We sought to evaluate (i) whether the PDC test is applicable to children on chronic PD, and (ii) whether the physiological mass transport coefficients defined in the three pore model are dependent on age or body size in childhood. METHODS: A validation study was performed in 32 pediatric chronic PD patients. Twenty tests were performed using a standard CAPD regimen, and 22 tests using a simplified automated PD (APD) protocol. Test accuracy and precision were evaluated by comparison of predicted with measured 24-hour dialysate clearances of urea, creatinine, beta2-microglobulin and albumin and ultrafiltration rates. Long-term reproducibility was assessed in 16 patients by repeated clearance studies after a median time interval of 10 weeks. RESULTS: While daily clearances of urea and creatinine were predicted with good precision and accuracy with both test protocols (concordance correlation coefficients 0.90 to 0.98, mean difference predicted-calculated -0.6 to +0.6 ml/min/1.73 m2), ultrafiltration rates were predicted more closely by the APD (r = 0.97) than by the CAPD test (0.80). Middle and large molecule clearances were predicted less precisely in both test settings (r = 0.48 to 0.83). Re-test reproducibility was slightly lower than the predictive precision observed in the original test (r = 0.80 to 0.91). The calculated total peritoneal pore area increased in absolute terms, decreased with body size when standardized to weight, and was independent of body size when normalized to body surface area. The body size-normalized fluid reabsorption rate was slightly increased in young infants compared to older children or adults. CONCLUSIONS: The PDC test permits to model peritoneal solute and water transport with remarkable precision in children of all age groups. While the peritoneal pore area is a linear function of body surface area, fluid reabsorption appears to be slightly increased in young infants.     

Effect of various marine lipids on transdermal drug delivery--in vitro evaluation

The effects of several marine lipids on the penetration of hydrocortisone and nitroglycerin through excised hairless mouse skin have been studied. Fatty acid extracts obtained by hydrolysis of Portuguese dog-fish-liver-oil or by hydrolysis of cod-liver-oil were shown to be effective skin penetration enhancers. Phospholipid obtained from squid was also shown to be effective enhancer. However, the enhancing effect of the marine products could generally be associated with their content of free unsaturated fatty acids. The fatty acid extract obtained from cod-liver-oil caused insignificant skin irritation when incorporated into an ointment base and applied to human skin.     

An Evaluation of Space Time Cube Representation of Spatiotemporal Patterns

Space time cube representation is an information visualization technique where spatiotemporal data points are mapped into a cube. Information visualization researchers have previously argued that space time cube representation is beneficial in revealing complex spatiotemporal patterns in a data set to users. The argument is based on the fact that both time and spatial information are displayed simultaneously to users, an effect difficult to achieve in other representations. However, to our knowledge the actual usefulness of space time cube representation in conveying complex spatiotemporal patterns to users has not been empirically validated. To fill this gap, we report on a between-subjects experiment comparing novice users' error rates and response times when answering a set of questions using either space time cube or a baseline 2D representation. For some simple questions, the error rates were lower when using the baseline representation. For complex questions where the participants needed an overall understanding of the spatiotemporal structure of the data set, the space time cube representation resulted in on average twice as fast response times with no difference in error rates compared to the baseline. These results provide an empirical foundation for the hypothesis that space time cube representation benefits users analyzing complex spatiotemporal patterns.     

Separation of saturated/unsaturated fatty acids

Fatty acid mixtures can be separated into one fraction rich in saturated fatty acids and the other rich in unsaturated acids. Since saturated fatty acids have a higher melting point than unsaturated, liquid mixture to be fractionated is cooled to a temperature at which the larger part of the saturated acids crystallize, while the greater part of unsaturated acids remain in liquid form. Different industrial methods to separate the two phases are described. The oldest and simplest method is slowly to cool and crystallize the mixture in shallow pans to form cakes which then are pressed in presses of different design. By applying high pressure, the liquid olein is thus squeezed out from the cake, leaving the stearin fraction behind. A new process to separate the phases is to mix an aqueous solution, containing a wetting agent, with the crystallized fatty acid mixture. The stearin crystals are thus wetted and transferred into the aqueous phase, which then can be separated from the olein phase in a centrifuge. The stearin/aqueous suspension is heated to melt the stearin, which can then be separated in a second centrifuge. Other methods to improve phase separation use organic solvents, among which are methanol, acetone, methyl formate and propane. In the solvent fraction process, the miscella has to be cooled to a lower temperature than in the aforementioned methods, due to the solubility effect of the solvents. The solvents are removed by distillation from the fraction. Typical operation results with different types of raw materials are given. The advantages and disadvantages of the different methods are discussed.     

A novel modelling approach for evaluating the preindustrial natural carrying capacity of human population in Iceland

The pre-industrial natural carrying capacity is believed to have limited the human population in Iceland to a maximum of fifty to sixty thousand inhabitants. Since AD 1800 the Icelandic population has gradually grown up to nearly 300 thousand in 2005. In this paper a simple approach is used to evaluate the potential population size that the pre-industrial Icelandic environment could possibly sustain. A dynamic model was constructed that simulates the population size according to potential biological production available for livestock. Biological production was determined by the extent of the total potential vegetation cover based on the Degree-Day concept. Fluctuations in the mean annual temperature causes changes in the potential vegetation cover and as a consequence change the biological production sustaining livestock and ultimately human population. The simulation's results indicate that the potential population that the Icelandic environments could sustain during the pre-industrial period fluctuated between 40 and 80 thousand. The results further indicate that the severe land degradation experienced after the Viking settlement period in AD 900 had a marginal impact on the population size. The pre-historical population did however overshoot the natural sustainability on several occasions.     

Chemoenzymatic synthesis of structured triacylglycerols containing eicosapentaenoic and docosahexaenoic acids

There are indications in the recent literature that the location of polyunsaturated fatty acids, such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), in triacylglycerols (TAG) may influence their oxidative stability. To address that question, two types of structured lipids were designed and synthesized: firstly, a TAG molecule possessing pure EPA or DHA at the mid-position with stearic acid at the outer positions; and secondly, a TAG molecule possessing pure EPA or DHA located at one of the outer positions with stearic acid at the mid-position and the remaining end position. The former adduct was synthesized in two steps by a chemoenzymatic approach. In the first step 1,3-distearolyglycerol was afforded in good yield (74%) by esterifying glycerol with two equivalents of stearic acid in ether in the presence of silica gel using Lipozyme^TM as a biocatalyst. This was followed by a subsequent chemical esterification with pure EPA or DHA using 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide as a coupling agent in the presence of 4-dimethylaminopyridine in dichloromethane in excellent yields (94 and 91, respectively). The latter adduct was synthesized in two enzymatic steps. In the first step tristearoylglycerol was prepared in very high yield (88%) by esterifying glycerol with a stoichiometric amount of stearic acid under vacuum at 70–75°C using an immobilized Candida antarctica lipase without a solvent. That adduct was subsequently treated in an acidolysis reaction with two equivalents of EPA or DHA without solvent at 70–75°C or in toluene at 40°C in the presence of Lipozyme to afford the desired product in moderate yields (44 and 29%, respectively). This work was presented at the Biocatalysis Symposium in April 2000, held at the 91st Annual Meeting and Expo of the American Oil Chemists’ Society, San Diego, CA.