Dynamic probe of ZnTe(110) surface by scanning tunneling microscopy

The reconstructed surface structure of the II–VI semiconductor ZnTe (110), which is a promising material in the research field of semiconductor spintronics, was studied by scanning tunneling microscopy/spectroscopy (STM/STS). First, the surface states formed by reconstruction by the charge transfer of dangling bond electrons from cationic Zn to anionic Te atoms, which are similar to those of IV and III–V semiconductors, were confirmed in real space. Secondly, oscillation in tunneling current between binary states, which is considered to reflect a conformational change in the topmost Zn–Te structure between the reconstructed and bulk-like ideal structures, was directly observed by STM. Third, using the technique of charge injection, a surface atomic structure was successfully fabricated, suggesting the possibility of atomic-scale manipulation of this widely applicable surface of ZnTe.     

Late complications in traumatic coronary artery fistula: report of a case requiring surgical repair after 8 years

A full-length cDNA clone for a progesterone membrane binding protein from porcine vascular smooth muscle cells was isolated and the complete nucleotide sequence determined. The cDNA encodes a protein of 194 amino acids with a transmembrane segment. This protein is likely to represent the first steroid membrane receptor or a part of it for which sequence information is available.     

Monte Carlo simulation of the sol-gel process for the hydrolysis and polycondensation of tin tetra-n-butoxide

The sol-gel process for the hydrolysis and polycondensation of tin tetra-n-butoxide in butanol was followed by viscosity measurements. The precipitation of tin-containing ultrafine particles was observed without any variation in the solution viscosity in the absence of diethylene glycols, while the viscosity increase was made without any precipitation by the addition of diethylene glycol. The induction period and the rate of the viscosity increase after the induction period was independent of the diethylene glycol content but depended upon the water content. The Monte Carlo simulation data were consistent with data for the viscosity experiment. The simulation was based on a kinetic model of the slow hydrolysis of tin tetra-n-butoxide, the reverse reaction of hydrolysis, and the polycondensation of the hydroxy derivatives.     

Relationship between crystallinity and device characteristics of In‐Sn‐Zn oxide

We have reported that the transistors having the c‐axis‐aligned crystalline (CAAC) In‐Ga‐Zn oxide (IGZO) show good performance. Recently, In‐Sn‐Zn Oxide (ITZO) has attracted much attention because of its high electron mobility, as well as IGZO. However, it has been reported that ITZO field effect transistors (FET) tend to have positive Vth (normally‐on characteristics) and poor reliability compared with IGZO‐FETs. We have reported that high‐performance and high‐reliability OS‐FETs can be fabricated by using CAAC‐IGZO, which has high crystallinity and has no clear grain boundaries, as an active layer. Therefore, we have fabricated CAAC‐ITZO thin films to improve performance of ITZO‐FETs by using CAAC‐ITZO as an active layer. In addition, FETs employing CAAC‐ITZO have better characteristics and reliability than FETs using nano‐crystal ITZO. Furthermore, constant photocurrent method (CPM) measurement was carried out in order to estimate density of deep‐level defect states caused by oxygen vacancies in oxide semiconductors. The results show that CAAC‐ITZO has lower density of deep‐level defect states than nano‐crystal ITZO. We attribute the improvement in reliability of ITZO‐FETs to a decrease in deep‐level defect states of an ITZO active layer, as is the case with IGZO.     

Evaluation of Desulphurization Flux in CaO‐Al2O3‐BaO‐CeO2‐MgO System

The flux of the CaO‐Al₂0₃‐BaO‐CeO₂‐MgO system as a desulphurization flux containing no fluorine for the secondary metallurgy process was evaluated in this study. The flux composition was designed using the eutectic compositions of the binary systems. The melting and desulphurization abilities of the fluxes were evaluated by measuring their liquidus temperatures and the distribution ratios of sulphur between the fluxes and the carbon‐saturated iron or stainless steel. The lowest liquidus temperature of 1325°C was obtained by adding 5.7 mass% MgO to the 80mass%A‐20mass%B flux. (A: 12CaO‐7Al₂O₃, B: BaCeO₃+12mass%Al₂O₃). The distribution ratios of sulphur and sulphide capacities of the fluxes in this study were higher than those of the commercial product of calcium aluminate flux. This means that the CaO‐Al₂O₃‐BaO‐CeO₂‐MgO fluxes developed in this study have higher desulphurization and melting abilities compared with the commercial product of calcium aluminate flux.     

Measurement of vertical and horizontal vibrations of a probe for acoustic evaluation of food texture

Two‐dimensional (vertical and horizontal) vibrations of a wedge‐type probe upon food rupture were evaluated separately using two accelerometers placed perpendicular to a guide rod of a swing‐arm device for texture evaluation of the flesh of three varieties of apples and three types of potato chips. Voltage signals from the accelerometers were filtered using a half‐octave band‐pass filter. The energy texture index (ETI), based on kinetic energy of the vertical or horizontal probe vibrations, was calculated over low to high frequency bands (no. 1–21). The spectra for the flesh of the three varieties of apples included two common peaks for vertical ETI at band no. 11 (1,120–1,600 Hz) and 19 (17,920–25,600 Hz) and horizontal ETI at band no. 1 (0–10 Hz) and 15 (4,480–6,400 Hz). The spectra for the three types of potato chips had a common ETI peak at band no. 11 (1,120–1,600 Hz) for horizontal ETI and at no. 15 (4,480–6,400 Hz) for vertical ETI. The three apple varieties gave rise to different intensities of vertical and horizontal ETIs while the two peaks were maintained. The thick potato chip type had higher vertical and horizontal ETIs than the thin and soft varieties in most bands; however, the thin type had the highest vertical ETIs only in lower bands (0–200 Hz). The soft type had the lowest vertical and horizontal ETI. The above results suggest that different food textures can be distinguished by two‐dimensional vibration analyses of probe insertion into a food sample based on frequency bands.     

Human Response to Emergency Communication: A Review of Guidance on Alerts and Warning Messages for Emergencies in Buildings

The purpose of this article is to provide guidance on enhancing human response to emergency communication. This guidance can, in turn, help engineers improve the design of emergency notification and messaging systems, which, as a result, can help inform occupant response, reduce occupant evacuation time, and increase occupant safety. The article begins with a literature review on how people respond to emergencies. The Protective Action Decision Model, which describes the decision-making process that precedes human response in disaster events, is used as a framework for the literature collected as part of this review. This model is divided into three pre-decisional and five decisional processes. The method used to create the guidance document is then explained, including the six steps taken to review the literature collected (from 162 engineering and social science sources), generate findings from this literature, and compile the key statements found in the guidance document. Guidance on alerts, visual/audible warnings and dissemination of warning messages are provided. These are organized according to alert/warning type and dissemination method. The findings of the literature review include five guidance statements on alerts, 16 guidance statements on visual warnings, seven guidance statements on audible warnings and eight guidance statements on the dissemination of warning messages. Finally, guidance on emergency message testing, including language, readability and fire drills as a means of response testing, is provided. It is envisioned that this guidance will inform practitioners on the design of future emergency communications and subsequently enhances evacuee performance through a better understanding of the manner in which emergency information is processed and the tools available to provide such information.     

Observation of residual stress and defects in silicon induced by scribing

Residual stresses induced by three scribing methods, diamond point scriber, laser scriber and diamond blade saw, are studied quantitatively by infra-red photoelasticity. It is clear that diamond blade saw scribing is most desirable, for residual stress induced by it is several times smaller than the stress caused by the other methods. The stress gradient differs between the laser scribed sample and the others, probably because of the difference in stress generation mechanism. Removing the damaged layer by etching reduces residual stress. The three scribing methods are also studied by the observation of defects after annealing and the results are compared with those determined by photoelastic measurement.     

Composite of Au nanoparticles and molecularly imprinted polymer as a sensing material

A molecularly imprinted polymer with immobilized Au nanoparticles (Au-MIP) is reported as a novel type of sensing material. The sensing mechanism is based upon the variable proximity of the Au nanoparticles immobilized in the imprinted polymer, which exhibits selective binding of a given analyte accompanied by swelling that causes a blue-shift in the plasmon absorption band of the immobilized Au nanoparticles. Using adrenaline as the model analyte, it was shown that molecular imprinting effectively enhanced the sensitivity and selectivity, and accordingly, Au-MIP selectively detects the analyte at 5 microM. The combination of molecular imprinting and the Au nanoparticle-based sensing system was shown to be a general strategy for constructing sensing materials in a tailor-made fashion due to wide applicability of the imprinting technique and the independence of the sensing mechanism from the analyte recognition system.     

Facile one-step route to polyaniline–silver nanocomposite particles and their application as a colored particulate emulsifier

Polyaniline–silver nanocomposites were synthesized in the form of colloidal particles by the facile one-step aqueous chemical oxidative dispersion polymerization of aniline using silver nitrate as an oxidant and poly(vinyl alcohol) as a colloidal stabilizer. Aniline monomer was oxidized by silver ions, yielding polyaniline and elemental Ag simultaneously. The synthesized nanocomposite particles were colloidally stable over 2 years and transmission electron microscopy studies indicated the production of spherical, plate and rod-shaped polyaniline–silver nanocomposite particles with a silver core–polyaniline shell morphology. The conductivity of a pressed pellet of the nanocomposite particles using the conventional four-point probe technique was 1.4 × 10^?2 S/cm at 25 °C. The nanocomposite particles behaved as a ‘colored’ particulate emulsifier for the stabilization of transparent oil-in-water emulsions.