Synthesis of polyethylene oxide end‐capped with perfluoroalkyl groups/polystyrene prototype brushes

Polystyrene (PS)/poly(ethylene oxide) (PEO) prototype brushes were prepared by alternating free‐radical copolymerization of methacryloyl‐terminated PS and α‐vinylbenzyl‐ω‐hydroxy or α‐vinylbenzyl‐ω‐perfluoroalkyl (R_f) PEO macromonomers with the addition of Lewis acid (SnCl₄). It was found from their dilute‐solution properties that PS/PEO end‐capped with R_f (PBR_f), and PS/PEO having OH groups at terminal ends (PBOH) prototype brushes formed a single molecule in benzene and aggregates in chloroform, respectively. However, the brush PBOH formed a single molecule in N,N‐dimethylformamide. Such aggregation behaviors seemed to be caused by the interaction between hydroxy groups of PEO chain ends. The brush PBOH was also converted into PBR_f‐type brush by chemical modification, using corresponding acid chloride. The substitution of R_f groups was ～70% due to slipping of terminal hydroxy groups into PEO internal domains. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 772–778, 2006     

Ergonomics solution for crossing collisions based on field assessment of visual environment at urban intersections in Japan

This paper aims to assess quantitatively the actual visual environment of uncontrolled urban downtown intersections in Japan in relation to frequently occurring crossing collisions and to discuss the safety countermeasures for them. In Field Study 1 dealing with direct visibility, our ultra-wide-angle photograph analysis revealed that most of the right/left-ward visible range at 11 intersections were insufficient to check safety, and the quality of direct visibility was closely associated with causing crossing collisions. The countermeasures to reduce a blind area were determined to be a top priority. In Field Study 2 dealing with indirect visibility, more than half of the 25 traffic convex mirrors had marked shortcomings for preventive safety, and ergonomics guidelines ensuring indirect visibility were proposed for installing traffic convex mirrors. Low-cost/low-technology-oriented countermeasures are highly recommended to obtain clear/sufficient images of crucial information satisfying drivers' requirements on traffic convex mirrors in accordance with those ergonomics guidelines was highly recommended. Crossing collisions could be prevented by improvement of poor direct and indirect visibility.     

Analysis and discussion on conduction current based on simultaneousmeasurement of TSC and space charge distribution

A new analysis of conduction current distributed in dielectrics based on simultaneous measurements of thermally stimulated current (TSC) and time dependent space charge distribution is proposed. A new system pulsed electro-acoustic (PEA) method has been developed to enable simultaneous measurement of the TSC and the dynamic space charge and electric field distributions as a function of temperature within insulators. With the new system, the relationship between the TSC and the time dependent electric field distribution in electron beam (e-beam) irradiated PMMA has been investigated. From the time dependent electric field, the displacement current in dielectrics is obtained. The TSC is a typical external current which is represented as an addition of the displacement current and a conduction current in dielectrics. This paper makes it clear that the conduction current as a function of position is determined by the simultaneous measurement of the external current and the dynamic space charge distribution     

Research and Development of the Coprecipitation Process for Lanthanum Germanate Oxyapatite

Although lanthanum germanate oxyapatite (La–Ge–O) has shown good potential for use as a solid electrolyte in energy storage applications, its synthesis has been challenging by either solid‐ or solution‐state methods. In this study, a new synthesis of La–Ge–O was developed through a coprecipitation technique, in which a highly concentrated homogeneous aqueous solution of La and Ge was prepared from aqueous ammonium germanate and lanthanum nitrate solutions with the addition of dilute nitric acid. Several precipitates were formed by pH manipulation, including an amorphous material obtained at pH > 3. Compared to the individual precipitation behaviors of the parent compounds, the amorphous precipitate was formed only from the aqueous two‐component mixture, and appeared to contain both metals. This material was transformed into crystalline mixtures upon heating at 1273 K. The crystalline phases were La₂Ge₃O₉ and hexagonal‐type GeO₂ when the precipitate was formed below pH 8, and the La–Ge–O and La₂Ge₂O₇ phases when the precipitate was formed around pH 8. Product formation from the coprecipitate was discussed based on X‐ray diffraction and thermal analyses. The improved availability of La–Ge–O will allow more extensive investigations of its useful properties.     

Solubility of NiO in Al2O3

Solubility of NiO in Al₂O₃ was determined by electron probe microanalysisy A diffusion couple method was used by coupling an NiO-doped Al₂O₃ polycrystal to a pure single crystal of Al₂O₃. The solubility of NiO in Al₂O₃ in air was 230 wt ppm (157 at. ppm of cations) and 170 wt ppm (116 at. ppm) at 2073 and 1973 K, respectively. The solubility of NiO in Al₂O₃ obtained in this work was compared with our previous work of the solubility of MgO in Al₂o₃.     

Catalytic Performance of Aged Rh/CeO2–ZrO2 for NO–C3H6–O2 Reaction Under a Stoichiometric Condition

The activity of Rh/CeO₂ for NO reduction by C₃H₆ was gradually deceased by mixing with ZrO₂ until 68 mol%. Rh supported on CeO₂–ZrO₂ with higher OSC was found to show lower catalytic activity. High OSC of CeO₂–ZrO₂ would probably stabilize the surface of Rh in oxidized state, resulting in low activity and low efficiency of C₃H₆ utilization for NO reduction. In situ FT-IR spectroscopy suggested that mononitrosyl species such as Rh(NO)^δ? and Rh(NO)^δ+ are reaction intermediates in the NO–C₃H₆–O₂ reaction over Rh/CeO₂–ZrO₂ catalysts.     

Loss factors of mirrors for a gravitational wave antenna

Low-loss mirrors fabricated by ion-beam-sputtering machines for possible application in an interferometric gravitational wave antenna were evaluated by use of Nd:YAG laser light (lambda = 1064 nm) with two distinct measurements: a tabletop experiment that used a short cavity with a small beam with a beam waist of approximately 2w(0) = 0.82 mm, and an optical test that used a 20-m prototypical gravitational-wave detector with a large beam with a beam waist of approximately 2w(0) = 4.4 mm. A multilayer coating comprised 29 layers of SiO(2)/Ta(2)O(5) and one protective coating of SiO(2). The best values obtained as a result of these measurements were 16 ppm (parts in 10(6)) and 30 ppm in total loss, respectively. Also, a two-dimensional loss map generated by use of a small beam successfully revealed the existence of a loss structure within the coating surface. These results imply that a high-reflectance multilayer coating has some inhomogeneities and a loss distribution with a typical scale of a few millimeters and that the total measured losses depend on the beam spot size.