Quantitative risk assessment using a Japanese hydrogen refueling station model

Although hydrogen refueling stations (HRSs) are becoming widespread across Japan and are essential for the operation of fuel cell vehicles, they present potential hazards. A large number of accidents such as explosions or fires have been reported, rendering it necessary to conduct a number of qualitative and quantitative risk assessments for HRSs. Current safety codes and technical standards related to Japanese HRSs have been established based on the results of a qualitative risk assessment and quantitative effectiveness validation of safety measures over ten years ago. In the last decade, there has been much development in the technologies of the components or facilities used in domestic HRSs and much operational experience as well as knowledge to use hydrogen in HRSs safely have been gained through years of commercial operation. The purpose of the present study is to conduct a quantitative risk assessment (QRA) of the latest HRS model representing Japanese HRSs with the most current information and to identify the most significant scenarios that pose the greatest risks to the physical surroundings in the HRS model. The results of the QRA show that the risk contours of 10^?3 and 10^?4 per year were confined within the HRS boundaries, whereas the risk contours of 10^?5 and 10^?6 per year are still present outside the HRS. Comparing the breakdown of the individual risks (IRs) at the risk ranking points, we conclude that the risk of jet fire demonstrates the highest contribution to the risks at all of the risk ranking points and outside the station. To reduce these risks and confine the risk contour of 10^?6 per year within the HRS boundaries, it is necessary to consider risk mitigation measures for jet fires.     

The method of double averaging: an approach for modeling power-factor-correction switching converters

This paper describes the modeling of power-factor-correction converters under average-current-mode control, which are widely used in switch-mode power supply applications. The objective is to identify stability boundaries in terms of major circuit parameters for facilitating design of such converters. The approach employs a double averaging procedure, which first applies the usual averaging over the switching period and subsequently applies generalized averaging over the mains period. The resulting model, after two averaging steps and application of a harmonic balance procedure, is nonlinear and capable of describing the low-frequency nonlinear dynamics of the system. The parameter ranges within which stable operation is guaranteed can be accurately and easily found using this model. Experimental measurements are provided for verification of the analytical results.     

Synthesis and photosensitivity of acryloylmorpholine copolymers with a pendant (meth)acryloyl group

We have developed new photopolymers that have superior waterproof properties and that can easily interact with polyfunctional acrylate compounds, thus serving as hydrophobic photocrosslinking reagents. Acryloylmorpholine monomers whose homopolymers were less moisture absorbing than the usual water‐soluble polymers but were still water soluble to a good degree, were copolymerized with other acryloyl monomers. We then introduced the photosensitive (meth)acryloyl group to side chains of the resulting polymers. Among six copolymers examined, the copolymers composed of acryloyl morpholine, hydroxyethyl acrylate, ethyl, or methyl methacrylate, and methacryloyl isocyanate were found to have nicely balanced hydrophilicity and waterproof properties, in addition to good compatibility with hydrophobic photocrosslinking reagents. The composite polymers thus obtained were confirmed to be promising photopolymers usable even in a highly humid environment. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 684–692, 2003     

A unified analysis of resonant converters

The general method of analysis for resonant power converters is presented. This analytical method generalizes the idea of state-space-averaging technique to overcome the limitations of the conventional state-space-averaging method. As the result, the characteristics of resonant power converters are clarified so that transfer functions and stability conditions are revealed. In addition, a computer program of analysis based on the proposed method is developed. The program can be applied to various resonant power converters, even when they have parasitic losses and higher-order resonant circuits     

Photostabilisation of colour formers for heat-sensitive recording systems: Effect of counter-ions on the photofading of fluoran dyes

Fluorans are given considerable attention as functional dyes for heat-and/or pressure-sensitive recording media. Numerous potential metal complexes were synthesised to prolong the life of coloured species. The protecting effect of these compounds against the photofading was examined on cellulose. It was found that the zinc or nickel salts of 3,5-dihydroxy-2-naphthoic acid and its derivatives can be applied as effective stabilisers against the fading of fluoran dyes.     

Fischer–Tropsch synthesis over Co–SiO2 catalysts prepared by the sol–gel method

Fischer–Tropsch synthesis was carried out in slurry phase over uniformly dispersed Co–SiO₂ catalysts prepared by the sol–gel method. When 0.01–1 wt.% of noble metals were added to the Co–SiO₂ catalysts, a high and stable catalytic activity was obtained over 60 h of the reaction at 503 K and 1 MPa. The addition of noble metals increased the reducibility of surface Co on the catalysts, without changing the particle size of Co metal significantly. High dispersion of metallic Co species stabilized on SiO₂ was responsible for stable activity. The uniform pore size of the catalysts was enlarged by varying the preparation conditions and by adding organic compounds such as N,N-dimethylformamide and formamide. Increased pore size resulted in decrease in CO conversion and selectivity for CO₂, a byproduct, and an increase in the olefin/paraffin ratio of the products. By modifying the surface of wide pore silica with Co–SiO₂ prepared by the sol–gel method, a bimodal pore structured catalyst was prepared. The bimodal catalyst showed high catalytic performance with reducing the amount of the expensive sol–gel Co–SiO₂.     

Reply to the Comment by K. Jorgensen et al. to “Analysis of constant rate period of spray drying of slurry”

Previously developed model for spray drying of slurry droplets with high solid content (Liang, 2001) was revised to describe correctly a boundary condition on the outer surface of droplet on basis of the rate of liquid evaporation.     

Multi-step precipitation separation system using mixture of thermosensitive polymers

Summary Multi-step precipitation separation system was developed by using aqueous mixtures of some thermosensitive polymers. The following three polymers were used here; poly(N-n-propylacrylamide), poly(N-isopropylacrylamide), and poly(N-isopropylmethacrylamide). A mixture of the three polymers showed three endothermic peaks, and the peak top temperatures were almost consistent with that of the each polymer solution. The polymers were purified by thermal precipitation to obtain fractions which can respond in narrow temperature ranges prior to use. In the case of the precipitation separation of two polymers mixtures, purities of the obtained precipitate and supernatant fractions became high comparing with the case in which the unpurified polymers were used. Parts of the polymers which were not the precipitation targets were also precipitated by the separation procedures. This was caused not only by insolubilization of the non-targeted polymers due to their phase transitions but also by their non-specific entanglement with the targeted polymers. The purities of the fractions also improved when the difference of the phase transition temperature between two polymers was large enough to avoid the coprecipitation. In the case of the precipitation separation of mixtures of the three polymers, purities of each fraction also improved when the purified polymers were used.     

Biased distribution of the branched-chain fatty acids in ceramides of vernix caseosa

The compositions of ester- and amide-linked fatty acids from ceramides of human vernix caseosa were described with emphasis on the distribution of the branched-chain fatty acid (BCFA). Two novel ceramides were isolated from vernix caseosa in the course of this study: the acylated type of esterified α-OH-hydroxyacid/sphingosine ceramide (Cer[EAS]) and nonacylated type of non-OH fatty acid/hydroxysphingosine ceramide (Cer[NH]). Their chemical structures were identified by nuclear magnetic resonance and chemical procedure. The Cer[EAS] was an acylceramide and consisted of the highest concentrations of ester- and amide-linked BCFA (62 and 67%, respectively). The iso- or anteiso-branching structures of the aliphatic chains were confirmed by the mass spectra of their picolinyl or pyrrolidide derivatives. As a whole, amide-linked fatty acids of ceramides 1–7 and Cer[NH] were normal types of straight-chain fatty acids with or without α- or ω-hydroxylation. The BCFA concentrations of amide-linked fatty acids in these ceramides (ceramides 1–7 and Cer[NH]) were low and less than 10%. The BCFA thus occurred exclusively in a novel acylceramide of Cer[EAS] in the vernix caseosa.