The sinuous antenna-A dual polarized feed for reflector-based searching systems

The sinuous antennas have a numerous applications in military and civil systems such as direction finding systems and reflector feeds due to their superior broadband characteristics and simultaneous polarization capability. In this paper, design, construction and measurements of planar sinuous antennas are investigated for 1–5 GHz frequency range. Feeding sections of this antenna are realized by using microstrip tapered baluns. We have determined the microstrip tapered balun dimensions using Ansoft HFSS-simulation program. The performances of the manufactured antenna are measured using HP vector network analyzer. Polarization patterns and return loss characteristics of the designed antenna that have been measured in anechoic chamber, are presented.     

A memetic algorithm for minimizing the total weighted completion time on a single machine under step-deterioration

In this paper, we consider minimizing total weighted completion time criteria on a single machine. Jobs processing times are step function of its starting time and all jobs have a common due date. First, we present some new lemmas and dominance properties for this NP-hard problem, and then a memetic algorithm using these properties is developed. We compare the solutions of the memetic algorithm with optimal solutions obtained from complete enumeration. The results show that the average percentage error of the proposed algorithm from optimal solutions is about 2% and as the variance of processing time increase, the percentage errors decrease.     

High throughput blood plasma separation using a passive PMMA microfluidic device

Since plasma is rich in many biomarkers used in clinical diagnostic experiments, microscale blood plasma separation is a primitive step in most of microfluidic analytical chips. In this paper, a passive microfluidic device for on-chip blood plasma separation based on Zweifach–Fung effect and plasma skimming was designed and fabricated by hot embossing of microchannels on a PMMA substrate and thermal bonding process. Human blood was diluted in various times and injected into the device. The main novelty of the proposed microfluidic device is the design of diffuser-shaped daughter channels. Our results demonstrated that this design exerted a considerable positive influence on the separation efficiency of the passive separator device, and the separation efficiency of 66.6 % was achieved. The optimum purity efficiency of 70 % was achieved for 1:100 dilution times.     

Some Generalised Characteristics of the Electro-dynamics of the Plasma Focus in Its Axial Phase: Illustrated by an Application to Independantly Determine the Drive Current Fraction and the Mass Swept-Up Fraction

We describe the axial phase of the Mather plasma focus by two coupled equations of motion and circuit. We non-dimensionalised these equations resulting in two coupled equations which are characterised by only three scaling parameters α, β and δ which are ratios of electrical to transit times, inductances and impedances respectively. The normalised current waveform, trajectory and speed profile are unique for each combination of α, β, δ which are the ratios of characteristic times (electrical discharge vs. axial transit), inductances (tube inductance vs. static inductance) and impedances (stray resistance vs. electrical surge impedance). This leads to important information and insight into various aspects of the axial phase. In the present work we show that in a time-matched plasma focus shot we deduce the value of axial phase current fraction f_c simply by measuring the calibrated voltage waveform and the uncalibrated current waveform. The scaling parameters β and δ are fixed; and by form-fitting the measured current waveform to the normalised current waveform using the value of α of the shot is determined uniquely; from which the peak current and the ratio of peak to average speed [the speed form factor (SFF)] are obtained. The average transit speed is measured by time-of-flight using the voltage upturn as indicator of end of axial phase. Then the SFF yields the peak speed. The measured voltage (back EMF), peak current and peak axial speed (all at the end of axial phase) allows the unambiguous measurement of f_c. The value of the mass swept-up fraction f_m is deduced from α which is the ratio of the characteristic discharge and the characteristic transit times, both deduced during the non-dimensionalisation of the equations. Analysis of a time-matched shot in the INTI PF at 15 kV, 3 Torr D₂ gave f_c = 0.68 and f_m = 0.05.     

Hydrometallurgical Extraction of Vanadium from Mechanically Milled Oil-Fired Fly Ash: Analytical Process Optimization by Using Taguchi Design Method

In this study, the Taguchi design method was employed to determine the optimum experimental parameters in extraction of vanadium by NaOH leaching of oil-fired fly. Prior to designed experiments, the raw precipitates were mechanicallly milled using a high-energy planetary ball mill. Experimental parameters were investigated as follows: mechanical milling (MM) times (2 and 5?hours), NaOH (1 and 2 molar concentration) as reaction solution (RS), powder to solution (P/S) ratios (100/400 and 100/600?mg/mL), temperature (T) of reaction system (303 K and 333?K [30?°C and 60?°C]), stirring times (ST) of reaction media (4 and 12?hours), stirring speed (SS) being adjusted to 400 and 600?rpm, and rinsing times (RT) of remained filtrates (1 and 3?hours). Statistical analysis of signal-to-noise ratio followed by analysis of variance was performed in order to estimate the optimum levels and their relative contributions. Data analysis is carried out using L₈ orthogonal array consisting of seven parameters each with two levels. The optimum conditions were MM1 (3?hours), RS2 (2 molar NaOH), P/S2 (100/600?mg/mL), T2 (333?K [60?°C]), ST2 (12?hours), SS1 (400?rpm), and RT1 (1?hour). Finally, from environmental and economical points of view, the process is faster and better organized by employing this analytical design method.     

Proximity effects of a layered periodic structure on miniaturization of patch antennas

A miniaturized microstrip antenna on a planar layered periodic structure is proposed, designed and fabricated. The proposed structure miniaturizes patch antennas in the microwave band. With varying the parameters of the proposed structure, the achieved miniaturization factor can be adjusted in the range 2.6–4.2. Numerical and experimental results are presented. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Morphological,mechanical, and rheological studies of PVC/ABS blends in the presence of maleic anhydride

A novel method of enhancing compatibility in PVC/ABS blends is the use of ABS‐grafted‐(maleic anhydride) (ABS‐g‐MAH) as a compatibilizer. In this study, maleic anhydride was grafted onto ABS (initiated by peroxide) in an internal mixer. Grafting degree was determined by a back‐titration method, and certain amounts of the resultant ABS‐g‐MAH were added to PVC/ABS blends during their melt blending in the mixer. The weight ratio of PVC to ABS was kept at 70:30. Evaluation of compatibilization was accomplished via tensile and notched Izod impact tests, scanning electron microscopy (SEM), and rheological studies. According to the SEM micrographs, better dispersion of the rubber phase and its finer size in properly compatibilized blends were indications of better compatibility. Besides, in the presence of a proper amount [5 parts per hundred parts of PVC (php)] of ABS‐g‐MAH, PVC/ABS blends showed significantly higher impact strengths than uncompatibilized blends. This result, in turn, would be an indication of better compatibility. In the presence of 5 php of compatibilizer, the higher complex viscosity and storage modulus, as well as a lower loss modulus and loss factor in the range of frequency studied, indicated stronger interfacial adhesion as a result of interaction between maleic anhydride and the PVC‐SAN matrix. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

A Study of the Effect of Aluminium on the Mechanochemical Reduction of Hematite by Graphite

The effect of addition of small amounts of aluminium on mechano‐chemical reduction of hematite by graphite was studied. Various amounts of aluminium (0 to 10%) were added to a hematite‐graphite mixture, in which C/O ratio was 1:1. The hematite‐graphite‐aluminium mixtures were then subjected to ball milling followed by heating up reduction. The heating up reduction was carried out in Ar atmosphere, using TG‐DTA device. In TG‐DTA experiments, samples were heated by a constant heating rate of 10 °C/min from room temperature up to 1100 °C and maintained for 30 minutes at this temperature. To clarify the reactions which took place during milling and heating up reduction, the samples were subjected to XRD examinations. It was found that the heat generated during exothermic reaction of aluminothermic reduction of hematite promoted the endothermic reaction of carbothermic reduction. In the course of heating up reduction, the carbothermic reaction occurred just after aluminothermic reaction. Increasing of aluminum content from 0 to 10% in 2 hours ball milled samples decreased the temperature of carbothermic reaction from 1020 °C to about 860 °C. The further ball milling of the samples up to 5 and 10 hours, for the samples containing 10 and 5% aluminium respectively, caused the decrease of the temperature of aluminothermic and carbothermic reactions to around the melting point of aluminium.     

Hydrogen Generation from CO2 Reforming of Biomass-Derived Methanol on Ni/SiO2 Catalyst

Topics in Catalysis - CO2 reforming of methanol for producing hydrogen was experimentally carried out in a fixed-bed reactor on 10%Ni/SiO2. The 10%Ni/SiO2 was completely reduced during H2...     

Enhancement in Physical Properties of Silver-Doped Fe–Ni Invar Nano-alloy Using Chemical Reduction Method

Journal of Superconductivity and Novel Magnetism - Silver-substituted Fe–Ni nano invar alloy is a new and innovative field of research due to their interesting invar, magnetic and electrical...