Fault section detection system for 66 kV underground branchtransmission lines using optical magnetic field sensors

A fault section detection system that uses optical magnetic field sensors and instantly detects the section in which a ground fault occurred was developed for 66 kV underground multiterminal systems having Y-branch joint boxes. The optical magnetic field sensor, which is based on the Faraday effect in Bi-doped YIG ((BiYbGd)₃Fe₅O₁₂) having a large Verdet constant, detects cable conductor currents of 0 to 2000 A with high precision with the use of a laminated magnetic ring core of silicon steel plates. Sensors and a fault section detector/indicator of a system are connected with optical fibers capable of nonrepeated transmission of over 6 km     

A unified proposal for characteristic testing methods and figure of merit of 8‐kV/3.5‐kVA class light‐triggered thyristors

Power devices with high capability have been developed. 8‐kV/3.5‐kA‐class light‐triggered thyristors have the highest capability among power devices. These devices are used in the Kii Channel HVDC transmission system in Japan. In this paper, we report the extracted problems of conventional testing methods of 8‐kV/3.5‐kA‐class light‐triggered thyristors among manufacturers, and the proposed unified testing methods on the basis of element characteristics and operating conditions in the Kii Channel HVDC system. Furthermore, we propose a figure of merit for power devices for the practical use, and try to extract elements used at the Kii Channel HVDC system with small margins and low withstand capabilities. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 140(3): 61–70, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10024     

Effect of Grain Boundaries on Thermal Conductivity of Silicon Carbide Ceramic at 5 to 1300 K

The thermal conductivity of a SiC ceramic was measured as 270 W·m⁻¹·K⁻¹ at room temperature. At low temperatures ( T < 25 K), the decrease in the conductivity was proportional to T ³ on a logarithmic scale, which indicated that the conductivity was controlled by boundaries. The calculated phonon mean free path in the ceramic increased with decreased temperature, but was limited to ∼4 μm, a length almost equal to the grain size, at temperatures below 30 K. We concluded that the thermal conductivity of the ceramic below 30 K was influenced significantly by grain boundaries and grain junctions.     

Autonomic control of heart rate during physical exercise and fractal dimension of heart rate variability

The objectives of the present study were to investigate autonomic nervous system influence on heart rate during physical exercise and to examine the relationship between the fractal component in heart rate variability (HRV) and the system's response. Ten subjects performed incremental exercise on a cycle ergometer, consisting of a 5-min warm-up period followed by a ramp protocol, with work rate increasing at a rate of 2.0 W/min until exhaustion. During exercise, alveolar gas exchange, plasma norepinephrine (NE) and epinephrine (E) responses, and beat-to-beat HRV were monitored. HRV data were analyzed by "coarse-graining spectral analysis" (Y. Yamamoto and R. L. Hughson. J. Appl. Physiol. 71: 1143-1150, 1991) to break down their total power (Pt) into harmonic and nonharmonic (fractal) components. The harmonic component was further divided into low-frequency (0.0-0.15 Hz) and high-frequency (0.15-0.8 Hz) components, from which low-frequency and high-frequency power (Pl and Ph, respectively) were calculated. Parasympathetic (PNS) and sympathetic (SNS) nervous system activity indicators were evaluated by Ph/Pt and Pl/Ph, respectively. From the fractal component, the fractal dimension (DF) and the spectral exponent (beta) were calculated. The PNS indicator decreased significantly (P < 0.05) when exercise intensity exceeded 50% of peak oxygen uptake (VO2 peak). Conversely, the SNS indicator initially increased at 50-60% VO2peak (P < 0.05) and further increased significantly (P < 0.05) at > 60% VO2peak when there were also more pronounced increases in NE and E.(ABSTRACT TRUNCATED AT 250 WORDS)     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.     

Anthocyanins,but not Anthocyanidins,from Bilberry (Vaccinium myrtillus L.) Alleviate Pruritus via Inhibition of Mast Cell Degranulation

Abstract: We have previously reported that bilberry anthocyanins exhibit an anti‐pruritic effect in a mouse model of allergic contact dermatitis. It has been reported that anthocyanins are particularly sensitive to thermal treatment and are easily hydrolyzed to anthocyanidins when exposed to high temperatures. The objective of this study was to compare the anti‐pruritic effect of anthocyanin‐rich quality‐controlled bilberry extract and anthocyanidin‐rich degraded extract using a mouse model of allergic contact dermatitis. BALB/c mice with allergic contact dermatitis induced by 4 weeks of repeated application of 2,4,6‐trinitro‐1‐chlorobenzene (TNCB) were administered Bilberon‐25 orally for 4 weeks after sensitization with TNCB. The effect of Bilberon‐25 on pruritus was evaluated by measurement of scratching behavior. RBL‐2H3 mast cells were used to investigate the effect of Bilberon‐25 on degranulation in 48/80‐stimulated mast cells. Compared with nonheated Bilberon‐25, the proportion of anthocyanins in heated Bilberon‐25 decreased, and the proportion of anthocyanidins was increased in heated‐time dependent manner. Treatment with non‐heated Bilberon‐25 significantly attenuated the TNCB‐induced increase in scratching behavior, whereas treatment with 2 h‐heated Bilberon‐25 did not. Moreover, 300 μg/mL nonheated Bilberon‐25 showed significant inhibition of degranulation in RBL‐2H3 mast cells, whereas 2 h‐heated Bilberon‐25 had no effect at any concentration studied. It is assumed that the inhibitory effect of bilberry anthocyanins on pruritus might be mediated, at least in part, by its inhibitory effect on mast cell degranulation. In conclusion, the anthocyanin‐rich but not anthocyanidin‐rich bilberry extract may be a useful dietary supplement for skin diseases involving pruritic symptoms, such as chronic allergic contact dermatitis, atopic dermatitis, and rhinitis.     

Time of Entry of Salmonella and Campylobacter into the Turkey Brooder House

The prevalence of Campylobacter (>90%) and Salmonella (33%) in turkeys at slaughter has been estimated. This report describes studies to estimate the time of entry of Campylobacter and Salmonella into the brooder house, which is the first stage of commercial turkey production. In trial 1, birds (∼100 per time point) were monitored by conventional culture at three intervals (0, 9, and 16 days of age). Campylobacter spp. were not detected in poults at the day of hatch; Salmonella was isolated from the ceca (3.9%) and yolk sac (0.1%). By day 9, Salmonella were frequently isolated from the ceca (55%) and small intestine (45%) while Campylobacter was not cultured. By day 16, the prevalence of Salmonella in the ceca (21%) and small intestine (5.1%) had declined; Campylobacter was infrequently isolated from either the ceca (2%) or small intestine (3%). In trial 2, poults (50 per time point at 5, 20, and 33 days of age) were monitored for Campylobacter and Salmonella by real-time polymerase chain reaction (PCR); Salmonella was also monitored by conventional culture. Whereas Campylobacter was not detected by real-time PCR in the ceca of 5-day-old birds, it was detected on days 20 (92%) and 33 (90%). In contrast, Salmonella was isolated from young birds at days 5 (98%), 20 (98%), and 33 (98%), after which time the turkeys were moved to the finisher house. At slaughter at 138 days, Salmonella prevalence in the ceca had declined (4.5%) in contrast to the prevalence of Campylobacter (92%). Antimicrobial sensitivity profiles of the Salmonella isolates indicated an increase of sulfonamide-resistant isolates throughout the brooder stage. Genotyping by pulsed-field gel electrophoresis analysis of Salmonella (45 isolates per sampling time) indicated fluctuating populations as the birds matured.     

Laser brazing of a dissimilar joint of austenitic stainless steel and pure copper

In many industries, there are applications that require the joining of stainless steel and copper components; therefore, the welding of dissimilar stainless steel/copper joints is a common process. For this investigation, the optimal brazing conditions and suitable filler metals for laser brazing of stainless steel/copper lap joints were studied. Tensile shear force increases with increases in the laser spot diameter or in the laser irradiation angle, which is associated with increased bonding width; however, as bonding width approaches 2 mm, tensile shear force reaches a saturated value due to fracturing at the HAZ of the Cu base plate. In order to obtain joints with high tensile shear strength, laser brazing was optimized by using Cu–Si-based filler metal under the following conditions: laser power, 4 kW; spot diameter, 3 mm; laser irradiation angle, 80°; irradiation position shift, 0.6 mm; brazing speed, 0.30 m/min; and filler metal feed speed, 0.30 min. Concerning filler metals, it was found that the Ni–Cu type showed relatively large tensile shear force even at high welding speeds in comparison with those of the Cu–Si, Cu, Cu–Ni, Ni–Cu and Ni types, respectively.     

适合中高频应用的NFM系列IGBT模块

针对医疗仪器和电焊机等市场领域对中高频开关应用的需求,三菱电机开发了NFM系列中高频IGBT模块。本文分析了电流谐振逆变器在两种不同工作模式下的波形和特征,然后详细介绍了NFM系列模块设计中采用的关键技术,包括IGBT硅片、超高速续流二极管(Free Wheeling Diode,简称FWD)、低电感封装技术等,并指出这种模块在中高频开关应用时在低损耗方面的优越性。     

关于三峡库区周边坡体岩石特性的考察

岩石强度的载荷速率相关性与岩石的时间相关性特性及粘弹性性质密切相关,而且强度的栽荷速率相关性越大,越容易发生蠕变破坏。对于坡体来说,如果构成坡体的岩石的时间相关性很显著．那么即使在比较低的应力下仅施加一点载荷,也容易发生变形。针对三峡库区周边滑坡多发,采集了组成滑坡坡体的4类主要岩石-泥岩、灰岩、泥质砂岩及砂岩。通过室内岩石力学强度试验,获得了不同岩石的强度特性曲线及表示载荷速率相关性的参数n。利用一个试件通过载荷速率交替变换获得了不同应变速率下的应力-应变曲线,从而根据强度的变化率不仅获得了峰值强度的载荷速率相关性,而且还求得了残余强度的载荷速率相关性。在单轴压缩试验中,残余强度的n值与峰值强度的n值有较大的差异,但在三轴压缩试验中两者的差异却不太明显。而且在气干状态下,不管是峰值强度还是残余强度的n值均随着围压的增加而增加。