A genetic algorithm for the optimisation of assembly sequences

This paper describes a Genetic Algorithm (GA) designed to optimise the Assembly Sequence Planning Problem (ASPP), an extremely diverse, large scale and highly constrained combinatorial problem. The modelling of the ASPP problem, which has to be able to encode any industrial-size product with realistic constraints, and the GA have been designed to accommodate any type of assembly plan and component. A number of specific modelling issues necessary for understanding the manner in which the algorithm works and how it relates to real-life problems, are succinctly presented, as they have to be taken into account/adapted/solved prior to Solving and Optimising (S/O) the problem. The GA has a classical structure but modified genetic operators, to avoid the combinatorial explosion. It works only with feasible assembly sequences and has the ability to search the entire solution space of full-scale, unabridged problems of industrial size. A case study illustrates the application of the proposed GA for a 25-components product.     

Optimizing the Runoff Estimation with HEC-HMS Model Using Spatial Evapotranspiration by the SEBS Model

Most of the commonly used hydrological models do not account for the actual evapotranspiration (ETa) as a key contributor to water loss in semi-arid/arid regions. In this study, the HEC-HMS (Hydrologic Engineering Center Hydrologic Modeling System) model was calibrated, modified, and its performance in simulating runoff resulting from short-duration rainfall events was evaluated. The model modifications included integrating spatially distributed ETa, calculated using the surface energy balance system (SEBS), into the model. Evaluating the model’s performance in simulating runoff showed that the default HEC-HMS model underestimated the runoff with root mean squared error (RMSE) of 0.14 m³/s (R²?=?0.92) while incorporating SEBS ETa into the model reduced RMSE to 0.01 m³/s (R²?=?0.99). The integration of HECHMS and SEBS resulted in smaller and more realistic latent heat flux estimates translated into a lower water loss rate and a higher magnitude of runoff simulated by the HECHMS model. The difference between runoff simulations using the default and modified model translated into an average of 95,000 m³ runoff per rainfall event (equal to seasonal water requirement of ten-hectare winter wheat) that could be planned and triggered for agricultural purposes, flood harvesting, and groundwater recharge in the region. The effect of ETa on the simulated runoff volume is expected to be more pronounced during high evaporative demand periods, longer rainfall events, and larger catchments. The outcome of this study signifies the importance of implementing accurate estimates of evapotranspiration into a hydrological model.

     

An FEC scheme combined with weighted scheduling to reduce multicast packet loss in IPTV over PON

Congestion is one of the most important challenges in optical networks. In a Passive Optical Network (PON), the Optical Line Terminal (OLT) is a bottleneck and congestion prone. In this paper, a framework is proposed with Forward Error Correction (FEC) at the IP layer combined with Weighted Round Robin (WRR) at the scheduling level to overcome packet-loss due to congestion in the OLT in order to achieve efficient video multicasting over PON. In the FEC scheme, Reed-Solomon (RS(n,k)) with erasure coding is used, where (n−k) erroneous symbols per n symbol blocks can be corrected. In our framework, an Internet Protocol TeleVision (IPTV) service provider uses the mentioned RS coding and generates redundant packets from regular IPTV packets in such a way that an Optical Network Unit (ONU) can recover lost packets from received packets, thus resulting in a better video quality. Simulation results show that using the proposed framework, an ONU can recover many lost packets and achieve better video quality under different traffic loads for its users. For instance, the proposed method can reduce packet loss rate by almost 55% and 10% under traffic load 0.9, respectively, compared with the Round Robin (RR) and WRR methods under symmetric traffic load. When High Receivers Queue (HRQ) traffic (i.e., traffic received by many users) is twice Low Receivers Queue (LRQ) traffic (i.e., traffic received by a small number of users), this reduction is almost 86% and 30% under traffic load 0.9. Finally, when LRQ traffic is twice HRQ traffic, the reduction in packet loss rate is almost 70% and 91% at traffic load 0.5.     

pHEMA: An Overview for Biomedical Applications

Poly(2-hydroxyethyl methacrylate) (pHEMA) as a biomaterial with excellent biocompatibility and cytocompatibility elicits a minimal immunological response from host tissue making it desirable for different biomedical applications. This article seeks to provide an in-depth overview of the properties and biomedical applications of pHEMA for bone tissue regeneration, wound healing, cancer therapy (stimuli and non-stimuli responsive systems), and ophthalmic applications (contact lenses and ocular drug delivery). As this polymer has been widely applied in ophthalmic applications, a specific consideration has been devoted to this field. Pure pHEMA does not possess antimicrobial properties and the site where the biomedical device is employed may be susceptible to microbial infections. Therefore, antimicrobial strategies such as the use of silver nanoparticles, antibiotics, and antimicrobial agents can be utilized to protect against infections. Therefore, the antimicrobial strategies besides the drug delivery applications of pHEMA were covered. With continuous research and advancement in science and technology, the outlook of pHEMA is promising as it will most certainly be utilized in more biomedical applications in the near future. The aim of this review was to bring together state-of-the-art research on pHEMA and their applications.     

Stability Margin Determination of Linear Discrete‐Time Systems Described By Fuzzy Convex Sets Uncertainty

This paper proposes a new method for determining the stability margin of uncertain linear discrete‐time systems with uncertainty described by fuzzy convex sets. Nonsymmetrical triangular membership functions describing the uncertainty of characteristic polynomial coefficients are considered. This method is based on transformation of the uncertain discrete systems to the continuous time area and generalization of Kharitonov theorem for determining the uncommon minimum confidence level that guarantees stability of the system.     

Effect of microwave sintering on the microstructure and electrical properties of low-voltage ZnO varistors

Coarse-grained ZnO varistors for low-voltage applications were prepared by microwave sintering technique under different soaking times of 5–150?min. For comparison, a low-voltage ZnO varistor was also prepared through a conventional sintering process. Microwave sintering remarkably enhanced the grain growth rate of ZnO varistors. Average grain size of the sample prepared by microwave sintering in 15?min was about 20?µm, which is similar to the grain size of sample prepared conventionally in 150?min time. In addition to grain growth, an increase in microwave sintering time led to precipitation of zinc titanate (Zn₂TiO₄) on the top surface of samples which sintered for long dwell times. X-ray diffraction and scanning electron microscopy results from different points of the samples declared that precipitation of Zn₂TiO₄ phase is due to the high rate of bismuth evaporation of Bi-rich liquid from top surface and the reaction between remaining titanium ions on the surface with ZnO. The results showed that increasing sintering time from 5 to 150?min increased the grain size from 14 to 33?µm, consequently, the breakdown field decreased from 90 to 27?V/mm, respectively. These changes led to a switch in the varistor application, from low to very low voltage.     

Accurate robotic belt grinding of workpieces with complex geometries using relative calibration techniques

Robotic belt grinding operations are performed by mounting a workpiece to the end effector and commanding it to move along a trajectory while maintaining contact with the belt grinding wheel. A constant contact force throughout the grinding process is necessary to provide a smooth finish on the workpiece, but it is difficult to maintain this force due to a multitude of installation, manipulation, and calibration errors. The following describes a novel methodology for robotic belt grinding, which primarily focuses on system calibration and force control to improve grinding performance. The overall theory is described and experimental results of turbine blade grinding for each step of the methodology are shown.     

OCRSpell: an interactive spelling correction system for OCR errors in text

In this paper, we describe a spelling correction system designed specifically for OCR-generated text that selects candidate words through the use of information gathered from multiple knowledge sources. This system for text correction is based on static and dynamic device mappings, approximate string matching, and n-gram analysis. Our statistically based, Bayesian system incorporates a learning feature that collects confusion information at the collection and document levels. An evaluation of the new system is presented as well. Received August 16, 2000 / Revised October 6, 2000     

Optimization of oval–round pass design using genetic algorithm

The primary purpose of this paper is to propose a computer aided optimal design system to support a generalized oval–round pass design, which is widely used as both intermediate and final passes in the process of rod rolling. This system, which is based on a hybrid model and the genetic algorithm, is developed to improve the efficiency, to reduce the manufacturing errors, as well as to extend the useful life of rolls through uniform wear design. Generalized parametric equations are established for geometrical modeling, graphic plotting of oval–round passes, as well as calculation of the cross section area, contact area and the lengths of contact arcs along the cross section of round groove in the MATLAB programming environment. Moreover, these equations can also realize the parametric transformation between roll profile and mathematical models for the oval–round pass design and optimization. The genetic algorithm is employed for the optimal design of oval–round passes in this paper. The objective functions are formulated for minimization of power consumption in the rolling process, variances between ideal dimensions and design dimensions, as well as variances between the lengths of contact arcs. To reduce the complexity and computational burden of the system, some reliable empirical formulas for the calculations of contact area and contact arc length are applied. Finally, the proposed approach is applied to an oval–round pass design. Through simulation and comparison of results against experimental data acquired from literature, it is found that this system is reliable, effective and easier to use.