Highly reliable testing of ULSI memories with on-chip voltage-downconverters

Two testing techniques for ultra-large-scale integrated (ULSI) memories containing on-chip voltage downconverters (VDCs) are described. The first in an on-chip VDC tuning technique that adjusts internal V_CC to compensate for the monitored characteristics of the process parameters during repair analysis testing. The second is an operating-voltage margin test, performed at various internal V_CC levels during the water sort test (WT) and the final shipping test (FT)     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

New theoretical concept of thin electromagnetic wave absorber usingresonant and scattering effect of dielectric and magnetic materials

Thin electromagnetic absorber such as less than 2~3 mm will be required for wireless LAN for domestic and business use together with millimeter wave broadcasting in the future. To make a thin construction, many resonators with lossy material were used. This paper present theoretical results that are useful for absorber designs     

Absorption of chlorine into aqueous sodium carbonate solutions and desorption of carbon dioxide

The absorption of pure chlorine into aqueous sodium carbonate solutions accompanied by the desorption of carbon dioxide was studied both theoretically and experimentally. The absorption rates of chlorine and the desorption rates of carbon dioxide were measured at 25°C using a baffled agitated vessel operated batchwise. The experimental results were analyzed with the chemical absorption theory based on the Lévěque model. The measured absorption and desorption rates were in good agreement with the theoretical predictions.     

The generic viewpoint assumption and planar bias

We show that generic viewpoint and lighting assumptions resolve standard visual ambiguities by biasing toward planar surfaces. Our model uses orthographic projection with a two-dimensional affine warp and Lambertian reflectance functions, including cast and attached shadows. We use uniform priors on nuisance variables such as viewpoint direction and the light source. Limitations of using uniform priors on nuisance variables are discussed.     

Incentive‐rewarding mechanism to stimulate activities in social networking services

We have developed an incentive‐rewarding mechanism that stimulates activities in social networking services (SNSs), including content uploading and link establishment. We particularly focus on changing the reward assignment ratio based on the different risks users perceive when uploading content with different privacy settings: public‐open and friend‐limited. Learning‐based simulation allowed us to observe that SNS activity, which we measured as the amount of browsed content within a certain period, can be controlled by a rewarding assignment ratio. We then analyzed how the amount of uploaded content and the increase of established links affect SNS activity. Results suggested that the optimal reward assignment ratio to maximize SNS activity changes depending on the total amount of available reward resources. Copyright © 2011 John Wiley & Sons, Ltd.     

New conceptual three-phase current-fed soft switching pulse width modulation converter with switched capacitor type resonant dc link

This paper presents a novel prototype of three-phase current-fed PWM converter with a switched capacitor type resonant dc link snubber circuit, which can basically operate under a principle of zero current soft switching commutation. The optimum PWM pattern-based control scheme proposed by the authors is effectively applied for this active converter. In this paper, the steady-state operating principle of a new converter circuit treated here is described. The practical design procedure of this converter is discussed from a theoretical point of view. The feasible experiment to confirm zero current soft switching commutation of this converter is concretely implemented and evaluated herein.     

AlAs/GaAs Schottky-collector resonant-tunnel-diodes

The Schottky-collector resonant-tunnel-diode (SRTD) is an resonant-tunnel-diode with the normal N⁺ collector layer and ohmic contact replaced by direct Schottky contact to the space-charge layer, thereby eliminating the associated parasitic series resistance Rins. By scaling the Schottky collector contact to submicron dimensions, the device periphery-to-area ratio is increased, decreasing the periphery-dependent components of the parasitic resistance, and substantially increasing the device's maximum frequency of oscillation. We report measured d.c. and microwave parameters of planar SRTDs fabricated with 1 μm-geometries in AlAs/GaAs.     

A 10-s doping technology for the application of low-temperaturepolysilicon TFTs to giant microelectronics

A bucket-type high-density (0.25-1.2-mA/cm²) low-energy (500-2000 V) ion source was utilized for high-speed phosphorus doping directly into a thin polysilicon layer without cap SiO₂. Doping gas with He dilution was selected to reduce etching of polysilicon film. Excimer laser (XeCl, 8 mm×8 mm) pulse annealing was introduced to activate effectively the doped impurity. The combination of these techniques provided a practically low sheet resistance for the TFT source, drain, and gate with a short time doping. The low-temperature polysilicon TFT fabricated with a doping time of 10 s had characteristics comparable to those of that fabricated by a longer time doping or conventional ion implantation, showing the practicality of this technology and its promise for giant microelectronics     

Structural hierarchy developed in injection molding of nylon 6/clay/carbon black nanocomposites

The influence of platelet-type clay nanoparticle (nanoplatelet) on the structural evolution in injection-molded nylon 6)/carbon composites was investigated. In the absence of nanoplatelets, the nylon 6/CB systems were found to exhibit unoriented structure with nylon 6 crystalline regions exhibiting exclusively α crystal form throughout the thickness of the samples. However, inclusion of nanoplatelets induces substantial local orientation of the nylon 6 chains in the molded parts in all processing conditions and compositions. In these clay/nylon 6/CB ternary nano systems, nylon 6 matrix was found to be exclusively in γ crystal form at the skin regions and α crystal form fraction increases towards the core of the molded parts as a result of decrease in cooling rate with depth during the solidification stage. Two nanoplatelet orientation behaviors were identified: (i) in the absence of irregular shaped CB, the nanoplatelets align parallel with one another following the local flow patterns. The latter behavior also causes enhanced orientation of the nylon 6 chains undergoing substantial shear amplification trapped in between the nanoplatelets (ii) in the CB-enriched regions, nanoplatelets though still remaining parallel to one another, are randomized by following the local contours of irregular shaped CB aggregates. These CB aggregates themselves were found to organize to form trains in larger scale as a result of flow alignment.