R-CURVE MODEL OF CERTAIN CERAMIC COMPOSITES

Abstract— The influence of crack-bridging on the R -curve for certain types of ceramic composites is modeled. Small scale bridging conditions are assumed. A recurrence procedure is used to solve the governing coupled integral equations, resulting in R -curves (stress intensity factor versus crack growth) that depend on well defined microstructural parameters. In addition, the bridging stresses and the crack opening diplacements were computed for all stages of the R -curve development. The numerical scheme is quite general and can be used for a variety of bridging laws. The convergence of the solution method is uniform, and the accuracy is a priori controlled. The results are normalized so that they can be applied for a large variety of composites with different micromechanical parameters. R -curves were computed for different bridiging laws, and were found to be sensitive to the specific bridging law used each time. Some strength-toughness relations are also discussed. The results are particularly suitable for slow crack growth analysis.     

Synergism of Toughening Mechanisms in Whisker-Reinforced Ceramic-Matrix Composites

The improved fracture resistance of whisker-reinforced ceramic-matrix composites involves more than one energy-absorbing mechanism. The possible mechanisms are reviewed and a micromechanical model evaluating the relative contributions to the overall toughness is presented. The mechanisms involve microcracking, load transfer, bridging, and crack deflection. The synergism of these mechanisms is examined using an energy release rate balance equation. The basic assumption of the proposed model is that the load transfer between the matrix and the whiskers is due to Coulomb friction. The model has been applied to an Al₂O₃/SiC whisker composite and shows reasonable agreement with reported experimental results. The role of the thermal residual stresses is also examined in light of the frictional load transfer assumption.     

Oxyfuel boiler design in a lignite-fired power plant

In the context of CO₂ capture and storage, the oxyfuel technology provides a promising option applicable in centralised power production schemes. This technology is based on combustion with pure oxygen instead of air and the flue gas mainly consists of CO₂ and H₂O. The work presented in this paper is focused in the application of the oxyfuel technology in a lignite-fired power plant. Significant design issues are the required extended flue gas recirculation in order to provide the ballasting effect of the absent N₂ and moderate the furnace temperatures. Therefore, a modified design of heat exchange surfaces of the oxyfuel steam boiler was formulated and was compared to a conventional air-fired boiler. A typical modern Greek air-fired power plant has been used as reference. The dominating factors that affect the dimensioning of the oxyfuel boiler are the higher radiative heat transfer - due to the high concentrations of CO₂ and H₂O in the flue gas - and the different flue gas mass flow, compared to a conventional air-fired boiler. For the determination of the thermodynamic cycle characteristics, simulations were made with the use of a thermodynamic cycle calculation software [Stamatelopoulos GN. Calculation and optimisation of power plant thermodynamic cycles, VDI-Regulations, Series 6, Nr. 340. Braunchweig, Mechanical Engineering Department; 1996 [in German]].     

The potential of WHR/batch and cullet preheating for energy efficiency in the EU ETS glass industry and the related energy incentives

The European Emissions Trading Scheme (EU ETS) covers approximately 45% of European greenhouse gases (GHGs), 11,000 stationary installations as well as aircraft operators. The EU ETS particularly affects the energy-intensive industries while it imposes a significant risk of “carbon leakage,” i.e., the risk of EU industry departing to countries with weaker restraints on GHG emissions. The EU glass industry, being capital intensive and also requiring long investment cycles, is the world’s largest glass producer with a market share close to one third of global production. Therefore, it is of significant importance to view the position of the EU ETS glass industry in terms of energy conservation possibilities. The present paper utilizes a vertical approach to provide information on both ETS market evolution and specific technical information to support technological innovation to the glass industry. EU ETS glass industry is analyzed regarding the balance between allocated European Union emission allowances (EUAs), verified CO₂ emissions, and potential shortfall in allowances so as to determine the situation of glass industries and the extent of urge for energy-saving activities towards the strengthening of their position within the requirements of the EU ETS phase III. The replication potential of waste heat recovery (WHR) through batch preheating is specifically addressed since it is considered a promising technology according to the latest Best Available Techniques (BAT) reference document for the glass industry under Directive IED 2010/75/EU. A case study for a container glass furnace based on simulation results is presented investigating the impact of different operating and design configurations on specific energy consumption and CO₂ emissions.     

Unified description of size effects of transport properties of liquids flowing in nanochannels

The present work connects transport properties of simple fluids flowing in nanochannels: the diffusion coefficient, the shear viscosity and the thermal conductivity. We used non-equilibrium molecular dynamics (NEMD) simulations of liquid argon flowing in a nanochannel formed by krypton walls, macroscopically equivalent to the planar Poiseuille flow, at constant temperature. All properties approach bulk values as the channel width increases. As the channel width decreases, the transport properties change dramatically: the diffusion coefficient decreases with the channel width, the shear viscosity increases with the channel width and the thermal conductivity increases with the channel width. The novel result of this work is that, if the size effect of one of the transport properties (say the diffusion coefficient) is known, then all the others can be estimated from results that apply to classic fluid mechanics.     

Growth and morphology manipulation of carbon nanostructures on porous supports

Structural polymorphism of carbon grown on porous supports by chemical vapor deposition (CVD) is demonstrated. Combining three different supports (activated carbon, macroporous polymeric beads, and microporous aluminophosphate molecular sieves), with two catalysts (Ni and Fe), yielded a variety of carbon nanostructures ranging from coils and belts to fibers and tubes, without changing CVD temperature, time, and precursor composition and flow rate. Ion exchange between ammonium-impregnated supports and the metals was necessary in order to achieve a fine dispersion of the catalyst over the support surface. Metal-support interactions and the balance between ammonium and metal concentrations were investigated and found to considerably affect catalyst dispersion, shape, and crystallographic orientation, which in turn determined the morphological and structural characteristics, and yield of the carbon product. The catalyst-loaded supports and the resulting carbon materials were characterized by scanning and transmission electron microscopy, thermogravimetic analysis, X-ray diffraction, and Raman spectroscopy, while nitrogen and mercury porosimetry were used to characterize the supports and evaluate the degree of support pore blocking by the carbon deposits.     

A variable speed wind energy conversion scheme for connection toweak AC systems

A three level control system for a variable speed wind energy conversion scheme (VSWECS) supplying a weak AC power system is presented. The objective of the control strategy is to maximize energy capture and simultaneously to support the voltage of the bus where the VSWECS is connected. Using an insulated gate bipolar transistor (IGBT) inverter, both control of active and reactive power supplied to the grid and reduction of harmonic distortion can be achieved. The response of the proposed scheme has been tested and evaluated in a test system using a developed computer program simulating in detail the system operation     

Congenital infection by human parvovirus B19 ascites-anaemia

A case of intrauterine infection by human parvovirus B19 (HPV B19) manifested as ascites during pregnancy is presented. Ascites was diagnosed by ultrasound at 27 weeks' gestation. A caesarean section was performed at 37 weeks'. owing to affected mobility of the fetus. A pale, female infant with low haemoglobin and bradycardia was delivered. Polymerace Chain Reaction (PCR) lab tests revealed that the mother and the fetus were infected by HPV B19. The neonate was born with low haemoglobin (Hb = 10 g/dl) and with ascites; it was discharged in good general condition 50 days after delivery.