Generation of Gas Discharge Plasma by an Arc Source with a Cold Hollow Cathode

The results from a study of an arc plasma source with a cold hollow cathode are presented. The source generates plasma with a density of ∼10¹⁰ cm⁻³ in a volume of ∼0.2 m³ at discharge currents of up to 150 A, an arc discharge operating voltage of 30–40 V, and a low pressure of 0.1–1 Pa. The motion of the cathode spot in the crossed electric and magnetic fields inside the hollow cathode and the cathode’s special design make it possible to eliminate almost completely the penetration of the sputtered cathode material into the working vacuum chamber.__________Translated from Pribory i Tekhnika Eksperimenta, No. 3, 2005, pp. 62–66.Original Russian Text Copyright © 2005 by Schanin, Koval, Akhmadeev.     

Optimal systems for moving-object detection and classification

Translated from Kibernetika i Sistemnyi Analiz, No. 5, pp. 137–145, September–October, 1993.     

Effect of pulse duration and size of interelectrode interval on electric-spark spraying. I. Effect of pulse duration and size of interelectrode interval on rate of electric-spark transfer

The influence exerted by electric-spark spraying on the kinetics of mass transfer and the physicomechanical properties of coatings is investigated. It is shown that electric-spark spraying is determined by the dynamic properties of the cathode jets, which depend on the electrical parameters of the spark discharge, the size of the interelectrode interval, and the physical properties of the coatings, which vary during spraying.     

Effects of initial powder vibrogrinding on the properties of AlN - BN composites

A study has been made on the effects of initial vibroground powders with various grain sizes on the properties of AlN - BN composites. As the specific surface of these powders increases, so do the density, mechanical strength, and thermal resistance of the composites.     

Reactive electric-discharge sintering of TiN-TiB2

Powder mixtures based on titanium and its dihydrides are sintered by electric discharge in a certain current mode to produce TiN + TiB₂ composites. It is established that the use of tetragonal titanium hydride as the starting material results in the complete synthesis leading to a TiN + TiB₂ composite. The higher shrinkage rate results from the higher purity of titanium dihydride, which, in its turn, increases the partial pressure of hydrogen in the reaction area and the reaction rate. Tetragonal titanium hydride is more preferable than cubic hydride and metal titanium. The microstructure of alloys resulting from the sintering of hydride-based mixtures is more homogenous: it includes equiaxial grains with the mean size of about 1 µm.     

Solving a maximin location problem on the plane with given accuracy

We consider the optimal placement problem in a bounded region on a plane with fixed objects. We specify minimal admissible distances between placed and fixed objects. The optimization criterion is to maximize the minimal weighted distances from placed objects to fixed ones. We propose a quasipolynomial combinatorial algorithm to solve this problem with a given accuracy. We show the results of a computational experiment with the integer programming model and the IBM ILOG CPLEX suite.     

Design of Lu2O3-reinforced Cf/SiC-ZrB2-ZrC ultra-high temperature ceramic matrix composites: Wetting and interfacial reactivity by ZrSi2 based alloys

The wettability and infiltration of molten ZrSi₂ and ZrSi₂-Lu₂O₃ alloys into C_f/SiC and B₄C-infiltrated C_f/SiC composites were investigated to understand the interfacial interactions that occur during the development of C_f/SiC-ZrC and C_f/SiC-ZrB₂-ZrC-Lu₂O₃ materials. A significant evaporation of Si from the liquid affected the wetting behaviour of the alloy when tested in a vacuum at 1670 °C. The better wetting and spreading of the alloy over the surface was observed for the composites with lower overall porosity (12 %). On the other hand, the formation of an outer dense layer, followed up by the uniform infiltrated region up to ～ 1 mm was observed for the C_f/SiC with higher porosity (21 %). The infiltrated alloy reacted with SiC matrix to form ZrC or with B₄C-infiltrated SiC matrix to form ZrB₂-ZrC-SiC. The Lu₂O₃ particles were not wetted by the melt, and were pushed away of the reaction zone by the solidification front.     

Canadian national power quality survey: frequency and duration ofvoltage sags and surges at industrial sites

The occurrence of voltage sags and surges originating on the primary and secondary sides of industrial facilities can disrupt continuous and noncontinuous industrial computer processes, a costly issue for society. This paper attempts to answer several questions concerning the frequency and duration of voltage sags and surges posed by industrial customers. The answers to these questions are based on the national survey results of the frequency and duration of voltage sags and surges at industrial sites monitored at their utilization voltage levels (e.g. 120, 347 V) and on the utility primary side of their facilities. The survey results provide a knowledge base for monitoring, designing, and utilizing voltage sag and surge mitigating technologies