Focusing characteristics of a wide-striped laser diode integratedwith a microlens

We developed a wide-striped laser diode integrated with a microlens that provides good focusing characteristics through a small focusing spot. We calculated and demonstrated that a 60-μm-wide core and a 1.9-μm-high ridge is the best structure for fundamental index-guiding mode oscillation of a wide-striped laser diode. We integrated a wide-striped laser diode with the developed microlens in the Fresnel diffraction held, and demonstrated that a device with a 60-μm-wide core has a minimum focusing spot width of 2.0 μm in the horizontal direction. Also, we estimated the wavefront in the Fresnel diffraction field from the working distance error of a lens designed for a collimated incident beam, and showed that the working distance error, focusing spot width, and sidelobe can be improved by this estimated wavefront     

A PAM control method for a matrix converter based on a virtual AC/DC/AC conversion method

In this paper, a novel control method for a matrix converter is proposed. The proposed method is a PAM (Pulse Amplitude Modulation) control method based on a virtual AC/DC/AC conversion method. Output voltage amplitude is controlled by controlling a virtual DC link voltage with a virtual rectifier. Output frequency is controlled by a virtual inverter. First, the proposed method is explained. Next, the validity of the proposed method is confirmed through simulation and experiment using a 750‐W prototype matrix converter. Moreover, various characteristics of the proposed method and conventional virtual AC/DC/AC method are compared through experiment. As a result of the experiment, it has been understood that total harmonic distortion of output current and common‐mode voltage can be reduced compared with the case of using a conventional virtual AC/DC/AC conversion method. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(4): 88–96, 2009; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20601     

Monolithic-integrated microlaser encoder

We have developed an extremely small integrated microencoder whose sides are less than 1 mm long. It is 1/100 the size of conventional encoders. This microencoder consists of a laser diode, monolithic photodiodes, and fluorinated polyimide waveguides with total internal reflection mirrors. The instrument can measure the relative displacement between a grating scale and the encoder with a resolution of the order of 0.01 mum; it can also determine the direction in which the scale is moving. By using the two beams that were emitted from the two etched mirrors of the laser diode, by monolithic integration of the waveguide and photodiodes, and by fabrication of a step at the edge of the waveguide, we were able to eliminate conventional bulky optical components such as the beam splitter, the quarter-wavelength plate, bulky mirrors, and bulky photodetectors.     

An Improvement Method of Matrix Converter Drives Under Input Voltage Disturbances

While the matrix converter has many advantages that include bidirectional power flow, a size reduction, a long lifetime, and sinusoidal input currents, it is vulnerable to the input voltage disturbances, because it directly exchanges the input voltage to the output voltage. The instantaneous effective power control (IEPC) method has been proposed to compensate the input voltage disturbances, in which the instantaneous effective power is kept constant by controlling input current. However, to date, no method has been proposed to maintain the stability of the system with the IEPC. The purpose of this paper is to propose a method to control the stability of the system with IEPC. First, this paper explains the IEPC theoretically. Next, a model of the system with the IEPC is developed, and stability analyses are conducted. Then, based on the results of the analyses, a stability control method for the system with the IEPC is proposed. Furthermore, the validities of the proposed method are demonstrated by simulation and experiments. Finally, a restart performance of the system after momentary power interruption is discussed. Because the IEPC does not need phase-locked-loop to detect the phase angle of the input voltage, fast restart is expected     

Control schemes for auxiliary switches of three‐phase PWM resonant snubber inverters

Control schemes for auxiliary switches of PWM controlled three‐phase resonant snubber inverters (RSIs) are proposed. The control schemes proposed in this paper are based on a conventional PWM technique. To avoid zero voltage switching lost conditions, the conventional PWM technique is modified in the proposed schemes. The proposed control schemes are so simple that they are suitable for digital control. In this paper, a CPLD (Complex Programmable Logic Device)‐based control IC, which realizes the proposed control schemes, for three‐phase auxiliary RSIs is also proposed and implemented. The IC generates gate signals for the main and auxiliary devices of the three‐phase RSI based on the proposed control schemes. The effectiveness of the proposed control schemes was verified through experiments. As a result, ZVS (Zero Voltage Switching) turn‐on at the main devices was achieved and a smooth sinusoidal output current was obtained by use of the control IC. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 152(4): 57–67, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20125     

Inhibitory effects of flavonoid glycosides isolated from the peel of Japanese persimmon (Diospyros kaki Fuyu) on antigen-stimulated degranulation in rat basophilic leukaemia RBL-2H3 cells

We found that two distinct flavonoid glycosides isolated from the peel of Japanese persimmon (Diospyros kaki Fuyu), isoquercitrin (Isq) and hyperin (Hyp), are capable of inhibiting antigen-stimulated degranulation in rat basophilic leukaemia RBL-2H3 cells. In order to elucidate the underlying mechanisms, we examined effects of Isq and Hyp on cellular responses induced by antigen stimulation. Treatment with both Isq and Hyp markedly inhibited antigen-stimulated elevation of intracellular free Ca²⁺ concentration and reactive oxygen species (ROS). Isq and Hyp did not affect NADPH oxidase (NOX) activity, but they possessed DPPH radical-scavenging activity similar to that of epigallocatechin gallate, a potent anti-oxidant, Finally, Isq and Hyp showed little or no effects on Ag-stimulated Syk activation or phosphorylation of signalling molecules. These results indicate that inhibition of antigen-stimulated degranulation by Isq and Hyp is mainly due to suppression of intracellular Ca²⁺ elevation, which is caused by direct scavenging of ROS that are generated by NOX. Our findings suggest that Isq and Hyp, isolated from the peel of persimmon, would be beneficial for alleviating symptoms of type I allergy.     

Changes in the characteristics of CuInGaSe2 solar cells under light irradiation and during recovery: degradation analysis by the feeble light measuring method

Changes in the characteristics of CuInGaSe₂ solar cells in response to light irradiation were investigated. Then these changes, which suggest long-term degradation, were clarified using the measurement technique by feeble light. The thin-film cell of this type is considered to be “ever stable”. A stable result over the short term was also obtained in the light accelerated test of 2-SUN performed in this experiment. On the other hand, it was found that the characteristics measured with feeble light show a remarkable change over time. As a result of measuring at 0.065–105 mW/cm² light intensity, the change rate of cell output power was so intense the measurement light was weak. This finding reflects the increase in an internal defect and suggests a possibility that light irradiation exerts the influence on long-term cell performance. Moreover, by measuring with feeble light, we found that the changed output recovers by reverse voltage application. The phenomenon of recovery up on comparatively low reverse voltage can be considered as an application for maintaining stability.     

A Method to Identify Steady Creep Strain from Indentation Creep Using a New Reference Area of Indentation

For the design of high-density electronic packages, finite element method (FEM) analyses to evaluate strength reliabilities of solder joints should be conducted by employing the material parameters which can precisely reflect the creep properties of solder joints in actual electronic equipment. To obtain accurate results of the structural analyses of the solder joints, a method to evaluate the steady-state creep deformation in situ must be developed. The indentation creep test is an effective method to evaluate the creep properties of the solder joints in situ; however, the creep properties obtained by this method do not give the same results as those obtained by tensile creep tests using bulk specimens. In this paper, the indentation creep test at 1 N loading for 9,000 s duration was experimentally conducted to confirm that the steady-state creep deformation obtained by the indentation creep test did not coincide with that by the tensile creep tests using bulk specimens. To identify the reason, the indentation creep simulation was conducted by FEM analysis. As a result, it was found that the reference area used to obtain the creep strain from the indentation creep test should be modified. A method to obtain the new reference area is proposed from comparisons of experiments with simulations. Finally, this paper shows that the creep properties obtained by the indentation creep test using the new reference area coincided with those obtained by tensile creep tests using bulk specimens.     

A quantitative evaluation of time-independent and time-dependent deformations of lead-free and lead-containing solder alloys

A method to separate plasticity and creep is discussed for a quantitative evaluation of the plastic, transient creep, and steady-state creep deformations of solder alloys. The method of separation employs an elasto-plastic-creep constitutive model comprised of the sum of the plastic, transient creep, and steady-state creep deformations. The plastic deformation is expressed by the Ramberg-Osgood law, the steady-state creep deformation by Garofalo’s creep law, and the transient creep deformation by a model proposed here. A method to estimate the material constants in the elasto-plastic-creep constitutive model is also proposed. The method of separation of the various deformations is applied to the deformation of the lead-free solder alloy Sn/3Ag/0.5Cu and the lead-containing solder alloy Sn/37Pb to compare the differences in the plastic, transient creep, and steady-state creep deformations. The method of separation provides a powerful tool to select the optimum lead-free solder alloys for solder joints of electronic devices.     

A control method for the matrix converter based on virtual AC/DC/AC conversion using carrier comparison method

This paper proposes a novel control method based on the virtual AC/DC/AC conversion for the matrix converter. The virtual AC/DC/AC conversion method is a very simple strategy to control the input current and the output voltage for the matrix converter. There are two new topics proposed in this paper. First, this paper proposes the minimum switching loss modulation on the virtual rectifier. In our proposed modulation, only two arms switching in the virtual rectifier using DC link current control by the virtual inverter can obtain clean sinusoidal input current. Second, a novel lean controlled carrier modulation on the virtual inverter is proposed. The leans of the triangle carrier are controlled by the duty ratio of the rectifier side pulse. The lean controlled carrier reduces harmonic distortion of the input current by avoiding interference between the rectifier control and the inverter control. These new proposals are confirmed by simulation and experimental results. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 152(3): 65–73, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20144