Vibration of clamped moderately thick general cross-ply plates using a generalized Navier approach

A hitherto unavailable analytical solution to the free vibration problem of general cross-ply laminated rigidly clamped rectangular plates, incorporating first-order shear deformation, and rotatory and in-plane inertias into the formulation, is presented. A recently developed boundary continuous displacement-based generalized Navier solution technique is used to solve the five highly coupled linear second-order partial differential equations with constant coefficients, and the associated geometric boundary conditions. The assumed solution functions are in the form of double Fourier series, which satisfy the rigidly clamped boundary conditions a priori in a manner similar to the conventional Navier method. Convergence characteristics of the natural frequencies of both symmetric and antisymmetric cross-ply plates are numerically established. Other numerical results presented herein include (i) comparison with the corresponding available first-order shear deformation theory-based Galerkin and classical lamination theory-based boundary-discontinuous analytical solutions, and (ii) study of the effects of thickness and aspect ratio on the natural frequencies.     

Erosion rate correlations of a pipe protruded in an abrupt pipe contraction

Erosion is one of the most serious problems in various gas and liquid flow passages such as flow in pipes, pumps, turbines, compressors and many other devices. Sand presence causes loss of pipe wall thickness that can lead to pipe erosion, frequent failures and loss of expensive production time. The importance of this problem is mainly due to many related engineering applications, viz. heat exchangers. In order to reduce the frequency of such pipe erosions, caps in the form of replaceable pipes are protruded in the sudden contraction regions which are exposed to most of the serious erosion rates. In the present work, numerical investigation of the erosion of a pipe protruded in a sudden contraction is presented. The turbulent, steady, 2-D axi-symmetric flow inside an axi-symmetric abrupt contraction pipe with a pipe protrusion embedded in it was solved by steady-state time averaged conservation equations of mass and momentum along with two equation model for turbulence. Particles are tracked using Lagrangian particle tracking. An erosion model was employed to investigate the erosion phenomena for the given geometry. The influence of the different parameters such as the inlet flow velocity (3–10 m/s), the particle diameter (10–400 μm), the protruded pipe geometry (thickness T=1–5 mm and depth H=2–5 mm) and the pipe contraction ratio (Cr=0.25–0.5) on the erosion of pipe protrusion was investigated. Correlations for the influence of inlet flow velocity, depth and thickness of the protruded pipe on the erosion rate are presented.     

Simulation of an integrated age replacement and spare provisioning policy using SLAM

This paper presents a SLAM simulation model for determining a jointly optimal age replacement and spare part provisioning policy. The policy, referred to as a stocking policy, is formulated by combining age replacement policy with a continuous review (s, S) type inventory policy, where s is the stock reorder level and S is the maximum stock level. The optimal values of the decision variables are obtained by minimizing the total cost of replacement and inventory. The simulation procedure outlined in the paper can be used to model any operating situation having either a single item or a number of identical items. Results from a number of case problems specifically constructed by 5-factor second order rotatory design have been presented and the effects of different cost elements, item failure characteristics and lead time characteristics have been highlighted. For all case problems, optimal (s, S) policies to support the Barlow-Proschan age policy have also been determined. Simulation results clearly indicate the separate optimizations of replacement and spare provisioning policies do not ensure global optimality when total system cost has to be minimized.     

NN-based Prediction Interval for Nonlinear Processes Controller

Neural networks (NNs) are extensively used in modelling, optimization, and control of nonlinear plants. NN-based inverse type point prediction models are commonly used for nonlinear process control. However, prediction errors (root mean square error (RMSE), mean absolute percentage error (MAPE) etc.) significantly increase in the presence of disturbances and uncertainties. In contrast to point forecast, prediction interval (PI)-based forecast bears extra information such as the prediction accuracy. The PI provides tighter upper and lower bounds with considering uncertainties due to the model mismatch and time dependent or time independent noises for a given confidence level. The use of PIs in the NN controller (NNC) as additional inputs can improve the controller performance. In the present work, the PIs are utilized in control applications, in particular PIs are integrated in the NN internal model-based control framework. A PI-based model that developed using lower upper bound estimation method (LUBE) is used as an online estimator of PIs for the proposed PI-based controller (PIC). PIs along with other inputs for a traditional NN are used to train the PIC to predict the control signal. The proposed controller is tested for two case studies. These include, a chemical reactor, which is a continuous stirred tank reactor (case 1) and a numerical nonlinear plant model (case 2). Simulation results reveal that the tracking performance of the proposed controller is superior to the traditional NNC in terms of setpoint tracking and disturbance rejections. More precisely, 36% and 15% improvements can be achieved using the proposed PIC over the NNC in terms of IAE for case 1 and case 2, respectively for setpoint tracking with step changes.

     

Ion Channels and Electroosmosis in Porous Geopolymers: A Novel Category of Low-Cost Memristors

Memristors are electric components that emulate the memory and computational properties of biological synapses by remembering the current that flows through them. Here, for the first time, the memristive properties of geopolymers, inexpensive ceramic materials manufactured at room temperature from alkaline activation of amorphous aluminosilicate precursors, are presented. It is demonstrated that geopolymers present all the fingerprints of memristors, and a physics-based model is proposed, which demonstrates that electroosmosis in the bulk geopolymer pores induces ion channels that foster change in the overall conductance of the bulk material, contributing to the observed memristive behavior. This model opens the door to a new category of porous electroosmosis-based bulk memristors. Synaptic functions such as short-term plasticity and long-term plasticity, as well as endurance and retention capabilities are also demonstrated. The reported findings pave the way to the use of geopolymers for low-cost applications in neuromorphic computing.     

A conditional purpose-based access control model with dynamic roles

This paper presents a model for privacy preserving access control which is based on variety of purposes. Conditional purpose is applied along with allowed purpose and prohibited purpose in the model. It allows users using some data for certain purpose with conditions. The structure of conditional purpose-based access control model is defined and investigated through dynamic roles. Access purpose is verified in a dynamic behavior, based on subject attributes, context attributes and authorization policies. Intended purposes are dynamically associated with the requested data object during the access decision. An algorithm is developed to achieve the compliance computation between access purposes and intended purposes and is illustrated with Role-based access control (RBAC) in a dynamic manner to support conditional purpose-based access control. According to this model, more information from data providers can be extracted while at the same time assuring privacy that maximizes the usability of consumers’ data. It extends traditional access control models to a further coverage of privacy preserving in data mining atmosphere. The structure helps enterprises to circulate clear privacy promise, to collect and manage user preferences and consent.     

Application of (G′G)-expansion method to Regularized Long Wave (RLW) equation

In this paper, the $\left(\frac{G^{\prime }}{G}\right)$-expansion method with the aid of Maple is used to obtain a generalized soliton solution for the generalized Regularized Long Wave (RLW) equation. Each of the obtained solutions, namely hyperbolic function solutions and trigonometric function solutions contain an explicit linear function of the variables in the considered equation. It is shown that the proposed method provides a powerful mathematical tool for solving nonlinear wave equations in mathematical physics and engineering problems.     

Interactive multilevel focus+context visualization framework

In this article, we present the construction of an interactive multilevel focus+context visualization framework for the navigation and exploration of large-scale 2D and 3D images. The presented framework utilizes a balanced multiresolution technique supported by a balanced wavelet transform (BWT). It extends the mode of focus+context visualization, where spatially separate magnification of regions of interest (ROIs) is performed, as opposed to in-place magnification. Each resulting visualization scenario resembles a tree structure, where the root constitutes the main context, each non-root internal node plays the dual roles of both focus and context, and each leaf solely represents a focus. Our developed prototype supports interactive manipulation of the visualization hierarchy, such as addition and deletion of ROIs and desired changes in their resolutions at any level of the hierarchy on the fly. We describe the underlying data structure efficiently support such operations. Changes in the spatial locations of query windows defining the ROIs trigger on-demand reconstruction queries. We explain in detail how to efficiently process such reconstruction queries within the hierarchy of details (wavelet coefficients) contained in the BWT in order to ensure real-time feedback. As the BWT need only be constructed once in a preprocessing phase on the server-side and robust on-demand reconstruction queries require minimal data communication overhead, our presented framework is a suitable candidate for efficient web-based visualization of complex large-scale imagery. We also discuss the performance characteristics of our proposed framework from various aspects, such as time and space complexities and achieved frame rates.     

A Study of the flow phenomenon of water in a channel with flat plate obstruction geometry at the entry

The flow ina parallel walled test channel, when obstructed with a geometry at the entrance, can be forward, reverse and stagnant depending on the position of the obstruction. This interesting flow phenomenon has potential benefit in the control of energy and various flows in the process industry. In this experiment, the flat plate obstruction geometry was used as an obstruction at the entry of the test channel. The parameters that influence the flow inside and around the test channel were the gap (g) between the test channel and the obstruction geometry, the length (L) of the test channel and the Reynolds number (Re). The effect of the gap to channel width ratio (g/w) on the magnitude of the velocity ratio (V₁/V₀ : velocity inside/ velocity outside the test channel) was investigated for a range of Reynolds numbers. The maximum reverse flow observed was nearly 20% to 60% of the outside velocity for Reynolds number ranging from 1000 to 9000 at g/w ratio of 1.5. The maximum forward velocity inside the test channel was found 80% of the outside velocity at higher g/w ratio of 8. The effect of the test channel length on the velocity ratio was investigated for different g/w ratios and a fixed Reynolds number of 4000. The influence of the Reynolds number on the velocity ratio is also discussed and presented for different gap to width ratio (g/w). The flow visualisation photo-graphs showing fluid motion inside and around the test channel are also presented and discussed.