Structural analysis and optimization of a tethered swept wing for airborne wind energy generation

In this paper, we present an aero‐structural model of a tethered swept wing for airborne wind energy generation. The carbon composite wing has neither fuselage nor actuated aerodynamic control surfaces and is controlled entirely from the ground using three separate tethers. The computational model is efficient enough to be used for weight optimisation at the initial design stage. The main load‐bearing wing component is a nontypical “D”‐shaped wing‐box, which is represented as a slender carbon composite shell and further idealised as a stack of two‐dimensional cross section models arranged along an anisotropic one‐dimensional beam model. This reduced 2+1D finite element model is then combined with a nonlinear vortex step method that determines the aerodynamic load. A bridle model is utilised to calculate the individual forces as a function of the aerodynamic load in the bridle lines that connect the main tether to the wing. The entire computational model is used to explore the influence of the bride on the D‐box structure. Considering a reference D‐box design along with a reference aerodynamic load case, the structural response is analysed for typical bridle configurations. Subsequently, an optimisation of the internal geometry and laminate fibre orientations is carried out using the structural computation models, for a fixed aerodynamic and bridle configuration. Aiming at a minimal weight of the wing structure, we find that for the typical load case of the system, an overall weight savings of approximately 20% can be achieved compared with the initial reference design.     

The effectiveness of adaptive versus non-adaptive learning with digital educational games

For the training of academic skills, digital educational games with integrated adaptivity are promising. Adaptive games are considered superior to non-adaptive games, because they constantly assess children's performance, and accordingly adapt the difficulty of the tasks corresponding to the children's individual level. However, empirical evidence with regard to the effectivity of adaptive compared to non-adaptive games is limited. A study was conducted with 191 children from the third year of Kinder garten who were enrolled in one of three conditions, that is, playing an adaptive version of the reading game (RG), a non-adaptive version of the RG or training with pen-and-paper exercises. In all three conditions, children trained emergent reading (phonological awareness and letter knowledge) once a week for 30 min over a period of 5 weeks. Children's performance on cognitive (phonological awareness, letter knowledge, reading fluency) and non-cognitive (motivation, self-concept) factors was assessed. Results revealed a significant improvement in phonological awareness and letter knowledge in all conditions. However, no differences between the conditions were observed with respect to children's improvement on phonological awareness and letter knowledge or on their post-test scores for reading fluency. With regard to motivation and self-concept, again, no differences in these non-cognitive factors were observed across conditions.     

Semantische Informationsextraktion in medizinischen Informationssystemen

Zusammenfassung Dieser Artikel beschreibt einige Erfahrungen und typische Problemstellungen mit Textmining in der Medizin und gibt einen Einblick in aktuelle und zukünftige Herausforderungen in Forschung & Entwicklung. Interessant ist n?mlich, dass auch im ,,Multimedia-Zeitalter“ die meiste Information immer noch als ,,Text“ vorliegt. Mithilfe von statistischen und linguistischen Verfahren wird mit sogenannter ,,Textmining-Software“ versucht, aus Freitexten Information ,,heraus zu schürfen“ (deshalb ,,Textmining“). Allerdings ist es damit noch nicht genug. Der n?chste Schritt besteht darin, die Information sowohl nutzbar als auch brauchbar zu machen. Die jeweiligen End-Benutzerinnen und End-Benutzer müssen in die Lage versetzt werden, auf der Basis der gewonnenen Information deren Wissen zu erweitern. In unserem konkreten Fall sollen damit Entscheidungen im Rahmen ?rztlichen Handelns unterstützt werden. Probleml?sungen in diesem Bereich erfordern eine holistische Sicht- und Herangehensweise. Daher wird es immer wichtiger, Erkenntnisse aus Informatik und Psychologie zusammenflie?en zu lassen und auf systemischer Ebene technologisch umzusetzen.     

The effect of backbone fluorination on the carrier mobility in alkoxy and alkyl substituted conducting polymers of the poly(phenylenevinylene) type

Summary We report the synthesis of some new backbone fluorinated polymers of the poly(phenylenevinylene) type. The new polymers were characterised by NMR, SEC and X-ray powder diffraction. The charge carrier mobilities were determined using pulse radiolysis time resolved microwave conductivity (PR-TRMC) and the carrier mobilities were compared to the similar non-fluorinated analogues. The changes in charge carrier mobilities as a function of molecular substitution pattern is discussed in terms of other materials properties such as electronic structure and absorption properties. The major result is that it was found possible for this type of material to alter the electronic energy levels by molecular substitution without imparting significant changes in the magnitude of the charge carrier mobilities and the optical properties.     

On the effect of treating poly(acrylic acid) with argon and tetrafluoromethane plasmas: Kinetics and degradation mechanism

Poly(acrylic acid) (PAAc) films were treated with either an argon or a tetrafluoromethane (CF₄) plasma and subsequently analyzed with X-ray photoelectron spectroscopy (XPS). PAAc films were decarboxylated during both types of plasma treatments. In addition, during the CF₄ plasma treatment, the PAAc films became fluorinated. The plasma phase during the argon plasma treatment of PAAc films was investigated with optical emission spectroscopy. It was shown that during this plasma treatment carbon dioxide, water, and possibly hydrogen were liberated from the PAAc surface. By covering the surface of PAAc films with different materials (lithium fluoride, UV fused silica, and glass) during the plasma treatment, it was possible to differentiate between photochemically induced and particle-induced changes of the surface. This method was used to show that decarboxylation during the argon plasma treatment was caused by vacuum UV radiation (wavelength < 150 nm) and the decarboxylation/fluorination during the CF₄ plasma treatment was induced by reactive fluorine-containing species from the plasma phase. Furthermore, during both processes, etching of the PAAc surface occurred. Based on these mechanisms, kinetic models were derived that could be used to describe the measured kinetic data adequately. © 1994 John Wiley & Sons, Inc.     

Probabilistic motion-compensated prediction in distributed video coding

Distributed video coding (DVC) constitutes an original coding framework to meet the stringent requirements imposed by uplink-oriented and low-power mobile video applications. The quality of the side information available to the decoder and the efficiency of the employed channel codes are primary factors determining the success of a DVC system. This contribution introduces two novel techniques for probabilistic motion compensation in order to generate side information at the Wyner-Ziv decoder. The employed DVC scheme uses a base layer, serving as a hash to facilitate overlapped block motion estimation at the decoder side. On top of the base layer, a supplementary Wyner-Ziv layer is coded in the DCT domain. Both proposed probabilistic motion compensation techniques are driven by the actual correlation channel statistics and reuse information contained in the hash. Experimental results report significant rate savings caused by the novel side information generation methods compared to previous techniques. Moreover, the compression performance of the presented DVC architecture, featuring the proposed side-information generation techniques, delivers state-of-the-art compression performance.     

Zur personellen Verankerung der IT-Funktion im Vorstand börsennotierter Unternehmen: Ergebnisse einer inhaltsanalytischen Betrachtung

On the Rate of Board Members with IT Responsibilities in Firms Listed on the Stock Exchange: Results of a Content Analysis: This article reports on a content analysis that investigates the rate of board members with IT responsibilities in firms listed on the stock exchange in the German speaking countries. Furthermore, the study ascertains the correlation of six factors – which become evident through content analysis – with the rate of board members with IT responsibilities. A total of 679 annual reports of German, Austrian, and Swiss corporations have been analyzed. The results show that in Germany and Switzerland 26 percent of the firms investigated have a board member with IT responsibilities, in Austria the rate is 23 percent. Additionally, the results show that turnover and number of employees are highly positively correlated with the rate of board members with IT responsibilities. Furthermore, the data show a correlation between industry and the rate of board members with IT responsibilities.     

The development of a glove-box/Vitrobot combination: air-water interface events visualized by cryo-TEM

Aqueous interfaces are of paramount importance in the study of biological systems as well as in the biomedical sciences. To study these interfaces at the nanometer level it is of interest to develop methods that allow their observation with cryogenic transmission electron microscopy (cryo-TEM). Prevention of dehydration to preserve the "native" state during sample preparation prior to vitrification is often one of the most important parameters to control in cryo-TEM experiments. For the preparation of these types of samples, we felt the need for an extended workspace with temperature and humidity control; a 'glove-box' that seamlessly connects to the vitrification instrument, the Vitrobot. In this paper we describe the use of the glove-box in the 2D and 3D cryo-TEM study of DNA adsorption and calcium carbonate mineralization to Langmuir films. The data presented illustrates the necessity of a humidity-controlled environment to preserve the original "native" state of the monolayer system.     

Covalent Adaptable Microstructures via Combining Two-Photon Laser Printing and Alkoxyamine Chemistry: Toward Living 3D Microstructures

Manufacturing programmable materials, whose mechanical properties can be adapted on demand, is highly desired for their application in areas ranging from robotics, to biomedicine, or microfluidics. Herein, the inclusion of dynamic and living bonds, such as alkoxyamines, in a printable formulation suitable for two-photon 3D laser printing is exploited. On one hand, taking advantage of the dynamic covalent character of alkoxyamines, the nitroxide exchange reaction is investigated. As a consequence, a reduction of the Young´s Modulus by 50%, is measured by nanoindentation. On the other hand, due to its “living” characteristic, the chain extension becomes possible via nitroxide mediated polymerization. In particular, living nitroxide mediated polymerization of styrene results not only in a dramatic increase of the volume (≈8 times) of the 3D printed microstructure but also an increase of the Young's Modulus by two orders of magnitude (from 14 MPa to 2.7 GPa), while maintaining the shape including fine structural details. Thus, the approach introduces a new dimension by enabling to create microstructures with dynamically tunable size and mechanical properties.     

Berechnung und Optimierung von Geometrie und Eingriffsverhalten von Zahnformen beliebiger Achslage

The main benefit, the economical manufacturability of traditional gear profiles, such as an involute, are no longer of major importance in times of computer-aided design and production. Due to existing modern production techniques standard and more sophisticated gear types can be produced with high precision and maintainable financial effort. Especially for non-standard gear types modern gear production systems ensure high quality and reliability to the operator with regard to flank and meshing geometry. Depending on the context of application different gear types have advantages and disadvantages concerning load carrying capacity, effectiveness or noise excitation. Developing an optimized gearing for the desired application is thus a complex and elementary goal within the design process.