Bone remodelling after total hip arthroplasty

Bone remodelling of the proximal femur following total hip arthroplasty (THA) is related to stress deviation with respect to physiological condition. The clinical relevance of this process is much debated with respect to its role in THA failure. In the present study a group of 475 An.C.A. anatomic cementless stems implanted in our institution were assumed as clinical reference. Of them, 294 had a short stem and 181 had a long stem. Stress shielding was X-ray evaluated in each patient. The survivorship analysis of this study group (negative events = stress shielding) showed significantly (p<0.05) lower survival rates at 25 months follow-up for patients with long-stem implants. A 3-D FEM model of the proximal femur was used to analyse the load transfer mechanism for the two types of stems in fully or proximally only bonding conditions. Little difference was predicted in the proximal stress magnitudes for the different stem lengths. On the contrary, stem-bone bonding leads to a notable increase in the stress shielding.     

Modal significance measure in characteristic mode analysis of radiating structures

Any electromagnetic structure can be analysed in terms of its so-called characteristic modes at any frequency. A measure of the significance of a particular mode (when the structure is used as an antenna) is proposed.     

Heart failure in infancy and childhood

The heterogeneity of the reduced and S-carboxymethylated high-sulphur protein fraction from mouse hair has been examined by chromatography and polyacrylamide gel electrophoresis at pH values above and below the isoelectric region. Considerable heterogeneity is observed both in size (molecular weight range 12000-45000) and in charge. Amino acid analysis of a number of column chromatographic fractions shows the high-sulphur proteins to be largely composed of proteins with a carboxymethylcysteine content above 25 residues and a pronounced heterogeneity in arginine content. Their chromatographic behaviour is similar to that observed for the ultra-high-sulphur proteins from wool.     

The effect of Nb2O5 and ZrO2 additions on the behaviour of Li/MgO and Li/Na/MgO catalysts for the oxidative coupling of methane

Incorporation of Nb₂O₅ or ZrO₂ into both Li/MgO and Li/Na/MgO systems produced ternary and quaternary catalysts, respectively, capable of attaining optimal C₂ yields and selectivities at lower temperatures relative to the unpromoted materials. The degree of enhancement effected by these metal oxide additives was compared to that produced by Li/MgO and Li/Na/MgO catalysts promoted with SnO₂ or Co₃O₄. At reaction temperatures < 700°C, the Li/Co/MgO ternary system showed marked differences in behaviour compared to the other ternary catalysts tested. This was particularly evident in the variation in C₂ selectivity with time on stream during ageing studies of (i) untreated materials, (ii) materials pretreated in CO₂, and (iii) materials dosed periodically with CHCI₃.     

Testing of Power Cables for the Pulp and Paper Industry

Applications in the pulp and paper industry make special demands on the ability of cables to withstand high temperatures, attack by caustic chemicals, and exposure to fire. Measurement of these capabilities is already encompassed in recognized tests and testing procedures. A great many tests are now prescribed, covering the mechanical and physical?as well as electrical?performance of cables. Generally speaking, these tests can be carried out properly only with the facilities and controlled environment of a laboratory. In-service testing remains a difficult task and presents certain risks and problems. The testing facilities of a modern plant for the manufacture of electrical cables are described.     

Inhibition of Listeria monocytogenes by sodium diacetate and sodium lactate on wieners and cooked bratwurst.

The inhibition of Listeria monocytogenes by sodium lactate and sodium diacetate was evaluated for wieners containing pork, turkey, and beef and for cooked bratwurst containing beef and pork. Both products were supplied by commercial manufacturers. Treated products were surface-inoculated with 10(5) CFU of L. monocytogenes per package and vacuum-packed in gas-impermeable pouches. Wieners were stored for 60 days at 4.5 degrees C, and bratwurst were stored for 84 days at 3 and 7degrees C. A surface treatment that consisted of dipping wieners into solutions containing < or = 6% lactate and < or = 3% diacetate for 5 s did not delay pathogen growth compared with that for untreated wieners. In additional trials, the antilisterial activity of lactate and diacetate in wiener and bratwurst formulations was evaluated. Lactate levels ranged from 1.32 to 3.4%, and diacetate was evaluated at 0.1 and 0.25%. The growth of L. monocytogenes was delayed for 4 and 12 weeks at 7 and 3 degrees C, respectively, on uncured, unsmoked bratwurst formulated with 3.4% lactate/0.1% diacetate, compared with 1 and 2 weeks, respectively, for the formulation containing 2% lactate. L. monocytogenes grew by > or = 1 log unit after 4 weeks' storage at 3 or 7 degrees C on cured, smoked bratwurst without lactate or diacetate, but growth was inhibited for 12 weeks on cured, smoked bratwurst formulated with 3.4% lactate and 0.1% diacetate. Sodium lactate levels of > or = 3% and combinations of > or = 1% lactate plus > or = 0.1% diacetate prevented listerial growth on wieners stored for 60 days at 4.5 degrees C. These results indicate that dipping wieners in lactate-diacetate solutions is not an efficient way to apply these antimicrobial agents to wieners. However, the inclusion of combinations of sodium lactate and sodium diacetate in wiener or bratwurst formulations inhibits the growth of L monocytogenes at < or = 7 degrees C, and an additional margin of safety was observed for products that are cured and smoked.     

Microwave spatial beam splitter=combiner using artificial microwave volume hologram technology

The artificial microwave volume hologram technique has been applied to design a new microwave spatial beam splitter/combiner. It uses the multiplexing concept and has multiple holographic gratings integrated into a single hologram slab. A prototype has been fabricated and measured to verify the design concept