Weekly storage of coolness in heavy brick and adobe walls

Weekly storage of coolness in heavy walls (walls with large thermal inertia or large characteristic time constants or low Fourier numbers) was investigated numerically by considering one-dimensional heat conduction through the walls. The study consisted of first analyzing the heat flow through a single wall and considering various boundary conditions on the inside. The boundary conditions were: constant inside air tempeture throughout the day, variable inside air temperature on a 24-hour cycle, and variable inside air temperature on a 48-hour cycle. Next, the heat flow through walls was studied through a thermal network analysis of a simple building. In this case it was assumed that the ambient air temperature (following a periodic distribution) was increased suddenly and followed this new distribution for many days thereafter.It was concluded that walls with high thermal inertia or time constant can store coolness for several days. The larger the time constant of the wall (for example adobe as compared with brick) the longer it takes for the wall temperature to reach a steady periodic distribution after the change has occurred. However, because of low thermal conductivity of adobe, the retrieval of the stored coolness in these walls is slow, and the mean daily temperature of the room air in the adobe building does not change appreciably beyond seven days after the change. Increase of the wall thickness beyond 50 cm does not improve the thermal performance of the building significantly.     

Effect of carbon surface oxidation on platinum supported carbon particles on the performance of gas diffusion electrodes for the oxygen reduction reaction

The effect of carbon surface oxidation on platinum supported carbon particles (Pt/C) with nitric acid was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, polarization experiments and chronoamperometry. Cyclic voltammograms, polarization curves and electrochemical impedance spectra showed that the treated catalyst had much larger active surface area and higher ionic conductivity than the untreated catalyst, and provided enhanced performance for oxygen reduction. The formation of acidic groups was examined by IR spectra. The Pt/C surface oxidation had a large effect on the performance of a gas diffusion electrode for oxygen reduction reaction.     

Synthesis and thermomechanical characterization of polyurethane elastomers extended with α,ω‐alkane diols

A series of polyurethane (PU) elastomers was prepared by the reaction of poly(?‐caprolactone) and 4,4′‐diphenylmethane diisocyanate, which was extended with a series of chain extenders (CEs) having 2–10 methylene units in their structure. The completion of the reaction was confirmed by Fourier transform infrared spectroscopy. The chemical structures of the synthesized PU samples were characterized with Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR spectroscopy, and the thermal properties were determined by thermogravimetric analysis, DSC, and dynamic mechanical thermal analysis techniques. The mechanical properties were also studied and are discussed. The thermogravimetric analysis and DSC analysis showed that CE length had a considerable effect on the thermal properties of the prepared samples. The dynamic mechanical thermal analysis and damping peaks were also affected by the number of methylene units in the CE length. The elastomer extended with 1,2‐ethane diol exhibited optimum thermal properties, whereas the elastomer based on 1,10‐decane diol displayed the worst thermal properties. Tensile strength and elongation at break decreased with increasing CE length, whereas hardness showed the opposite trend. The glass‐transition temperature moved toward lower temperatures with increasing CE length. The decrease in the glass‐transition temperature and tensile properties were interpreted in terms of decreasing hard segments and increasing chain flexibility. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Surface characterization and biological properties of regular dentin,demineralized dentin,and deproteinized dentin

Bone autografts are often used for reconstruction of bone defects; however, due to the limitations of autografts, researchers have been in search of bone substitutes. Dentin is of particular interest for this purpose due to high similarity to bone. This in vitro study sought to assess the surface characteristics and biological properties of dentin samples prepared with different treatments. This study was conducted on regular (RD), demineralized (DemD), and deproteinized (DepD) dentin samples. X-ray diffraction and Fourier transform infrared spectroscopy were used for surface characterization. Samples were immersed in simulated body fluid, and their bioactivity was evaluated under a scanning electron microscope. The methyl thiazol tetrazolium assay, scanning electron microscope analysis and quantitative real-time polymerase chain reaction were performed, respectively to assess viability/proliferation, adhesion/morphology and osteoblast differentiation of cultured human dental pulp stem cells on dentin powders. Of the three dentin samples, DepD showed the highest and RD showed the lowest rate of formation and deposition of hydroxyapatite crystals. Although, the difference in superficial apatite was not significant among samples, functional groups on the surface, however, were more distinct on DepD. At four weeks, hydroxyapatite deposits were noted as needle-shaped accumulations on DemD sample and numerous hexagonal HA deposit masses were seen, covering the surface of DepD. The methyl thiazol tetrazolium, scanning electron microscope, and quantitative real-time polymerase chain reaction analyses during the 10-day cell culture on dentin powders showed the highest cell adhesion and viability and rapid differentiation in DepD. Based on the parameters evaluated in this in vitro study, DepD showed high rate of formation/deposition of hydroxyapatite crystals and adhesion/viability/osteogenic differentiation of human dental pulp stem cells, which may support its osteoinductive/osteoconductive potential for bone regeneration.     

The multi-agent programming contest from 2005–2010

The Multi-Agent Programming Contest is an annual international event on programming multi-agent systems: Teams of agents participate in a simulated cooperative scenario. It started in 2005 and is organised in 2010 for the sixth time. The contest is an attempt to stimulate research in the area of multi-agent system development and programming by (i) identifying key problems in the field and (ii) collecting suitable benchmarks that can serve as milestones for testing multi-agent programming languages, platforms and tools. This article provides a short history of the contest since it started and reports in more detail on the cows and cowboys scenario implemented for the 2008, 2009 and 2010 contest editions. We briefly discuss the underlying technological background and conclude with a critical discussion of the experiences and lessons learned.     

Stores clustering using a data mining approach for distributing automotive spare-parts to reduce transportation costs

Clustering of retail stores in a distribution network with specific geographical limits plays an important and effective role in distribution and transportation costs reduction. In this paper, the relevant data and information for an established automotive spare-parts distribution and after-sales services company (ISACO) for a 3-year period have been analyzed. With respect to the diversity and lot size of the available information such as stores location, order, goods, transportation vehicles and road and traffic information, three effecting factors with specific weights have been defined for the similarity function: 1. Euclidean distance, 2. Lot size 3. Order concurrency. Based on these three factors, the similarity function has been examined through 5 steps using the Association Rules principles, where the clustering of the stores is performed using k-means algorithm and similar stores are allocated to the clusters. These steps include: 1. Similarity function based on the Euclidean distances, 2. Similarity function based on the order concurrency, 3. Similarity function based on the combination of the order concurrency and lot size, 4. Similarity function based on the combination of these three factors and 5. Improved similarity function. The above mentioned clustering operation for each 5 cases addressed in data mining have been carried out using R software and the improved combinational function has been chosen as the optimal clustering function. Then, trend of each retail store have been analyzed using the improved combinational function and along with determining the priority of the depot center establishment for every cluster, the appropriate distribution policies have been formulated for every cluster. The obtained results of this study indicate a significant cost reduction (32%) in automotive spare-parts distribution and transportation costs.     

Robust matrix 𝒟U‐stability analysis

In this paper, the problem of robust matrix root‐clustering is addressed. The studied matrices are subject to both polytopic and unstructured uncertainties. An original point is the large choice of clustering regions enabled by the proposed approach since these regions can be unions of possibly disjoint and non‐symmetric subregions of the complex plane. The precise purpose is, considering a specified polytope, to determine the greatest robustness bound on the unstructured uncertainty such that robust matrix root‐clustering is ensured. To reduce conservatism in the derivation of the bound, the reasoning relies on a framework based upon parameter‐dependent Lyapunov functions. The bound value is computed by solving an ?? ?? ? problem. Copyright © 2003 John Wiley & Sons, Ltd.     

Insight into the Impact of Oxidative Stress on the Barrier Properties of Lipid Bilayer Models

As a new field of oxidative stress-based therapy, cold physical plasma is a promising tool for several biomedical applications due to its potential to create a broad diversity of reactive oxygen and nitrogen species (RONS). Although proposed, the impact of plasma-derived RONS on the cell membrane lipids and properties is not fully understood. For this purpose, the changes in the lipid bilayer functionality under oxidative stress generated by an argon plasma jet (kINPen) were investigated by electrochemical techniques. In addition, liquid chromatography-tandem mass spectrometry was employed to analyze the plasma-induced modifications on the model lipids. Various asymmetric bilayers mimicking the structure and properties of the erythrocyte cell membrane were transferred onto a gold electrode surface by Langmuir-Blodgett/Langmuir-Schaefer deposition techniques. A strong impact of cholesterol on membrane permeabilization by plasma-derived species was revealed. Moreover, the maintenance of the barrier properties is influenced by the chemical composition of the head group. Mainly the head group size and its hydrogen bonding capacities are relevant, and phosphatidylcholines are significantly more susceptible than phosphatidylserines and other lipid classes, underlining the high relevance of this lipid class in membrane dynamics and cell physiology.