Thermal stability of reinforced Nb3Sn composite superconductor under cryocooled conditions

Several types of reinforced Nb₃Sn wires have been developed to prevent reduction of superconducting properties by applying a strong electromagnetic force. To fabricate a cryocooled magnet using those reinforced wires, we experimentally measured the minimum quench energy (MQE) under cryocooled conditions of some reinforced Nb₃Sn wires. As a result, it became clear that thermal stability expressed as MQE was controlled by the temperature margin between the temperature of the operating condition and the transition temperature from superconductivity to normal. Using the FEM analysis, it was realized that the cause of the decline in thermal stability for the reinforced wires was the low thermal conductivity of the reinforced materials.     

Electrical and optical properties of fluorine-doped CdO films deposited by ultrasonic spray pyrolysis

The CdO:F samples have been deposited onto microscope glass substrates at 250 °C by ultrasonic spray pyrolysis method. With the incorporation of fluorine into CdO, the direct optical transition has shifted towards the shorter wavelengths, and the transparency of the material has increased at a given wavelength above the fundamental absorption edge. The shift in the absorption edge is explained by means of the Moss–Burstein effect, which is also supported with the results of the current–voltage characteristics. Here, a correlation has been established between the band broadening and the increase in conductivity due to the increase in carrier density.     

Bioeffects of Low Energy Ion-Beam Implantation and Vacuum Treatment on M1 Arabidopsis Thaliana

Vacuum treatment and ion-beam bombardment are two major processes in the low energy ion-beam implantation. To accurately study the contributions of these two major factors to the bioeffects separately, the M1 generation variation of Arabidopsis thaliana with ion-beam implantation and vacuum treatment were compared through a series of key plant development parameters including morphological observation, biochemical assay and RAPD （random amplified polymorphic DNA） analysis. The results showed that ion-beam implantation had obvious effect on almost all of these parameters, and the vacuum treatment had some impacts on several morphological parameters such as the bolting time and the length of the primary stem. Taking the results together, the indication is that vacuum treatment has some slight contributions to the bioeffects of ion-beam implantation while ion-beam bombardment itself is the major creator of the bioeffects.     

紧贴保护体钢筋砼老闸墩控爆拆除

介绍了特大体积闸墩爆破拆除时爆破参数的选取和实施方法。新老闸墩一端仅隔4cm，利用钻孔爆破法拆除老闸墩取得了快速，经济，安全的爆破效果。     

堆存温度对半水磷石膏胶凝性能影响

半水磷石膏（HPG）长时间堆存状态下会出现固结现象,其胶凝性能也相应下降。以室内HPG结晶水检测和单轴压缩试验为基础,通过设定4种不同堆存温度,分别为20,40,60和80 ℃,探究不同堆存温度作用下HPG试样结晶水质量分数变化和堆存后制备的充填胶凝材料（HCM）抗压强度发展规律,并采用扫描电镜等微观分析手段研究堆存温度对其强度影响机制。结果表明,堆存温度对HPG胶凝性能影响显著,高的堆存温度会加快HPG试样中的自由水转变为结晶水速率,而且会抑制堆存后制备的HCM强度发展。采用数据标准化对不同堆存温度作用后的试样抗压强度作出预测,被证实与实测值较吻合。微观分析发现,堆存温度主要影响体系的过饱和度,而使不同堆存温度作用后制备的HCM微观形态表现差异。      

An adaptive genetic algorithm for the time dependent inventory routing problem

In this paper we propose an adaptive genetic algorithm that produces good quality solutions to the time dependent inventory routing problem (TDIRP) in which inventory control and time dependent vehicle routing decisions for a set of retailers are made simultaneously over a specific planning horizon. This work is motivated by the effect of dynamic traffic conditions in an urban context and the resulting inventory and transportation costs. We provide a mixed integer programming formulation for TDIRP. Since finding the optimal solutions for TDIRP is a NP-hard problem, an adaptive genetic algorithm is applied. We develop new genetic representation and design suitable crossover and mutation operators for the improvement phase. We use adaptive genetic operator proposed by Yun and Gen (Fuzzy Optim Decis Mak 2(2):161–175, 2003) for the automatic setting of the genetic parameter values. The comparison of results shows the significance of the designed AGA and demonstrates the capability of reaching solutions within 0.5 % of the optimum on sets of test problems.     

絮凝沉淀,过滤处理合成苯乙烯污水

本文通过对合成苯乙烯污水水质考察，提出了利用污水中本身所含有的ＡｌＣｌ３作为絮凝剂，对该污水进行絮凝沉淀过滤工艺处理。试验结果表明，处理后污水ＣＯＤ、ＰＨ值１、悬浮物含量等各项指标均能达到新建污水处理装置的排放标准，此工艺个有投资少、运行简单、易操作管理、处理成本低等特点。     

雷达装备维修保障力量评估建模研究

为评估雷达装备维修保障力量,通过分析维修保障力量组织结构和运行方式,构建了雷达装备维修保障力量评价指标体系,并采用AHP方法给出了评估步骤．通过实例验证该模型是有效的,其评估结果可为优化雷达装备维修保障力量,提高维修保障效能提供有力的帮助．     

以电炉还原渣重构转炉钢渣的组成与性能

掺加电炉还原渣重构转炉钢渣的组成和结构制备了高胶凝活性的钢渣。采用化学全分析、XRD、SEM等手段分析了钢渣重构前后的组成、水化产物形貌,并进行了力学性能试验。结果表明:重构钢渣矿物组成以活性硅酸二钙、硅酸三钙和七铝酸十二钙等胶凝矿物为主。当电炉还原渣掺量分别为10%和20%、煅烧温度分别为1 350℃和1 250℃时,重构钢渣水泥的活性指数分别为102.9%和104.0%。掺重构钢渣水泥28 d龄期水化产物与普通硅酸盐水泥的相似,但浆体结构更为致密。     

通用化程度对装备系统效能影响分析

系统效能是衡量装备战斗力的重要指标,而通用化程度影响着装备系统效能．通过引用装备系统效能和通用化程度概念及计算方法,针对换件维修装备,建立了通用化程度对装备系统效能影响的量化模型．仿真结果验证了模型的实用性,可为装备的设计与综合保障提供理论参考．